- Radio Communication Test Station MT8000A
The MT8000A is for evaluating the RF TRx characteristics at development of 5G NR chipsets, communications modules, smartphones, and other radio equipment. It is also for researching new applications using 5G NR. It supports wavebands from sub-6GHz to mmWave used by 5G for mmWave TRP/EIRP measurements in combination with RF converters, OTA chamber, etc., as well as RF Protocol tests such as Beam Management tests.
- RF Chamber MA8171A
- CATR Anechoic Chamber MA8172A
OTA (Over The Air) chambers supporting 5G NR RF evaluation
Supporting for both 5G NR Sub-6GHz and mm-Wave bands. Also for Standalone（SA） and non-Standalone mode. Excellent transportability and reduced setup time.
The MA8171A can be used not only for RF but also for Protocol test. Supports beam management tests including beam forming.
The MA8172A adopts the Compact Antenna Test Range (CATR) method compliant with the 3GPP standard. Supports mm-Wave research and development and conformance testing.
- Spectrum Analyzer/Signal Analyzer MS2690A (50 Hz to 6 GHz)
- Spectrum Analyzer/Signal Analyzer MS2691A (50 Hz to 13.5 GHz)
- Spectrum Analyzer/Signal Analyzer MS2692A (50 Hz to 26.5 GHz)
- Vector Signal Generator MG3710E (100 kHz to 2.7/4/6 GHz)
Supports 5G NR Sub-6GHz
For evaluation of TRx characteristics at R&D of 5G NR chipsets, communications modules, smartphones, base stations, and other radio equipment. Also for researching new applications using 5G NR.
MS2690/91/92A include a built-in vector signal analyzer using wideband FFT analysis up to 125 MHz as well as other optional modulation analysis, vector signal generator and BER measurement functions in an all-in-one, high-performance, multifunction, benchtop signal analyzer.
The MG3710E can generate waveform patterns conforming to the 5G NR FR1 specifications defined in 3GPP TS 38.211, TS 38.212, and TS 38.213. It can output signals of various wireless systems such as WLAN, Bluetooth, GPS, narrowband communication, as well as cellular communication such as LTE FDD/TDD, W-CDMA, and GSM.
- Spectrum Analyzer/Signal Analyzer MS2850A
Supports 5G NR (sub-6GHz, mmWave)
The MS2850A supports evaluation of TRx characteristics at R&D of 5G NR chipsets, communications modules, smartphones, and other radio equipment. It is also for researching new applications and base stations using 5G NR.
It includes a built-in vector signal analyzer using wideband FFT analysis covering a frequency range of 9 kHz to 32/44.5 GHz with a maximum analysis bandwidth of 1 GHz. The high-speed, large-capacity digitizer function coupled with optional modulation analysis function combine to offer a high-performance, multifunction, benchtop signal analyzer with excellent cost-performance ratio for both R&D and manufacturing applications.
Signal data captured by the digitizer function can be analyzed using general-purpose signal-analysis tools optimized for R&D of 5G NR products.
- Signal Analyzer with 1 GHz Analysis Bandwidth(5G Measurement Software)