Skip to main content

下载中心

按产品型号搜索

按文档类型

Anritsu and Polar Instrument Solution for Delta-L 4.0 Measurement Based on Atlas SI Software with Anritsu 4-Port Benchtop VNAs Solution Flyer

This solution flyer discusses how the Polar Instrument solution and Anritsu VNAs have unique capabilities for making Delta-L PCB measurements which helps customers make quick and accurate measurements results. P/N: 11410-02880

产品手册 pdf 1.8 MB Version: A 2022/5/11

Offline Split 2x-Thru Touchstone File to Two 1x-Thru Using Equation Editor in ShockLine Vector Network Analyzer Application Note

In the signal integrity world, one of the most useful features is network extraction. Anritsu's ShockLine vector network analyzers provide full features on different scenarios to extract fixtures based on incomplete known standards. This application note discusses the completed functionality to perform 2x-thru with a ShockLine vector network analyzer along with equation editor. P/N: 11410-02882

应用指南 pdf 4.0 MB Version: A 2022/5/11

Configuring IC-CAP 2020 for VectorStar Operation Application Solution Brief

This document describes the procedure for setting up the IC-CAP software to add a VectorStar network analyzer to the Active Instrument Connections list and the steps to configure the program for operation of the VNA during device measurements. 11410-02881

产品手册 pdf 1.9 MB Version: A 2022/4/12

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

综合产品手册 pdf 13.3 MB Version: AC 2022/2/22

VectorStar MS464xB Series Calibration and Measurement Guide

The purpose of this Calibration and Measurement Guide is to introduce the basic calibration and operation of the VectorStar MS464xB Vector Network Analyzer (VNA) System and reduce the time required to become proficient at performing basic measurements. The procedures in this manual assume a working knowledge of, and a familiarity with, vector network analyzers. P/N: 10410-00318

测量指南 pdf 73.0 MB Version: AC 2022/2/15

VectorStar MS464xB Series Microwave Vector Network Analyzer Technical Data Sheet

This document provides detailed specifications for the MS4640B series microwave Vector Network Analyzers (VNAs), including all related options, and accessories. P/N: 11410-00611

技术指标 pdf 7.7 MB Version: AJ 2022/2/15

Anritsu and SWISSto12 Material Measurements Solution

The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with the SWISSto12 MCK systems, and are ideal for active and passive material measurements. P/N: 11410-01167

传单 pdf 1.1 MB Version: C 2022/1/27

Anritsu and Compass Technology Group Material Measurements Solution

The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with Compass Technology hardware fixtures and CTG software systems, and make an ideal solution for material measurements. P/N: 11410-01182

传单 pdf 1.5 MB Version: C 2022/1/27

Anritsu and Keycom Material Measurement Solution

Anritsu’s ShockLine and VectorStar series vector network analyzers are now compatible with all the available solutions from Keycom Technologies for various types of material measurements methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and many more. P/N: 11410-01191

传单 pdf 1.4 MB Version: C 2022/1/27

365xx-x Mechanical Calibration Kits Reference Manual

Calibration kits contain components used to identify and separate error sources inherent in microwave test setups. The kits described in this document contain all of the precision components and tools required to calibrate Vector Network Analyzer systems for error corrected measurement. P/N: 10410-00278

快速参考指南 pdf 3.5 MB Version: F 2021/9/14

VectorStar Broadband/Banded Millimeter-Wave Module Reference Manual

This Reference Manual provides information about the VectorStar Broadband/Banded Millimeter-Wave Modules. These modules are used with the ME7838 Series VectorStar Broadband/Banded Millimeter-Wave VNA Systems. P/N: 10410-00311

快速参考指南 pdf 7.9 MB Version: H 2021/9/14

VectorStar MS464xB Maintenance Manual

This manual provides general service and preventive maintenance information for the Vector Network Analyzers MS4640B models. The information includes replaceable parts information, performance verification tests, adjustment procedures, troubleshooting, theory of operation and block diagrams, and assembly/sub-assembly removal and replacement procedures. P/N: 10410-00320

维护手册 pdf 56.9 MB Version: F 2021/9/14

VectorStar MN469xC Series Multiport Test Set Maintenance Manual

This manual provides general service and maintenance instructions for the MN469xC Series Multiport Test Set. It contains procedures for testing the system for proper operation, verifying system performance in conjunction with a 2-port MS4640A or MS4640B VectorStar VNA. P/N: 10410-00730

维护手册 pdf 9.2 MB Version: D 2021/9/14

VectorStar ME7838A4 Multiport Broadband VNA Installation Guide

This manual provides instructions for setup and initial test of the VectorStar ME7838A4 Multiport Broadband/Banded Millimeter Wave Vector Network Analyzer System. P/N: 10410-00734

安装指南 pdf 8.6 MB Version: E 2021/9/14

VectorStar MS464xB Operation Manual

This operation manual is to used as a guide for the proper installation and operation of the VectorStar MS4640B Series of Vector Network Analyzers. P/N: 10410-00317

操作手册 pdf 23.4 MB Version: V 2021/7/7

VectorStar MS464xB Series User Interface Reference Manual

This manual provides a reference for the VectorStar Series VNA User Interface (UI) menus and dialog boxes. In addition, this manual provides the context-sensitive portion of the instrument Help system. P/N: 10410-00319

用户手册 pdf 66.7 MB Version: AB 2021/7/7

VectorStar MS464xB Programming Manual

This manual provides information for remote operation of the VectorStar MS4640B Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus, USB, and Ethernet. P/N: 10410-00322

编程手册 pdf 30.3 MB Version: AB 2021/7/7

VectorStar MS464xB Help

Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00040 | OHS | version AB | 07/07/2021

在线帮助系统 html 213.5 KB Version: AB 2021/7/7

VectorStar MS464xB Product Information, Compliance, and Safety

This guide provides warranty, safety and regulatory compliance information for the VectorStar Series VNA products. P/N: 10100-00063

技术指标 pdf 2.0 MB Version: L 2021/7/6

VNA Fundamentals Poster

This poster features sections on Circuits and Waves, S-Parameters, Reflection Coefficient, Phase and Group Delay, Non Linear Transmission Lines, VNA Architecture, Superposition/True Mode Stimulus, Time Domain, Pulse Measurements, and a Reflection Coefficient Table. P/N: 11410-00934

产品手册 pdf 5.3 MB Version: E 2021/4/30

按文档类型

MS4640B VectorStar Application (Software and DSP Firmware)

Unzip the downloaded file into a flash drive. Important: New software installation instructions are included. Please be sure to read the "VectorStar How To Install" document before installing.

驱动程序/软件下载 zip 412.6 MB Version: 2021.6.2 2021/9/1

Exact Uncertainty Calculator

This software can be used to calculate and plot Transmission and Reflection, Magnitude and Phase, measurement uncertainty, for VectorStar and ShockLine and family VNAs. It takes into consideration different calibration methods and kits, different conditions such as IF BW, and non-zero s11, s22, and s21, s12 conditions for transmission and reflection uncertainties respectively.

驱动程序/软件下载 exe 760.5 KB Version: 2021.7.1 2021/7/20

VectorStar Application Installation

This version of software (and any other software version 2.1.0 and later, including those of format V201x.x.x) requires installation of Bittware 8.33 on the VNA prior to installation of the VectorStar application. Installation of Bittware is only needed once and does not need to be reinstalled at every VectorStar application installation. Please refer to Appendix A in this document for details about Bittware versions and installation of this driver. VectorStar-How-To-Install

驱动程序/软件下载 pdf 107.3 KB 2020/5/21

CapVNA for VectorStar VNA

CAPVNA is a Windows program to capture, display, save and print the graphical and textual data from VectorStar VNAs. The displayed data can be loaded from a flash drive where it was previously saved at the VNA or captured directly from the VNA over the GPIB port. The displayed data can be saved in a variety of formats to the PC's internal disk drive or a network drive and printed to a local or network printer(including color).

驱动程序/软件下载 exe 3.6 MB Version: 1.0.1 2017/9/18

VectorStar MS4640B Download WannaCry Security Patch

Security patch for the MS4640B Series VectorStar Vector Network Analyzers.

驱动程序/软件下载 zip 19.9 MB Version: 1.0 2017/8/3

Windows GPIB (Version 3.79)

WindowsGPIB is a Windows®-based program that sends and receives program data over GPIB, in response to commands entered from the keyboard or from a command file, similar but friendlier than NI's WIBIC. It is a good tool for testing mnemonics and commands while developing ATE programs. Windows GPIB supports only NI GPIB.

驱动程序/软件下载 exe 4.1 MB Version: 3.79 2017/1/10

Noise Figure Uncertainty Calculator

The VectorStar Noise Figure Uncertainty Calculator is a standalone program used to provide the user a tool for easily determining measurement uncertainty while using the VectorStar VNA Option 041 – Noise Figure. The calculator can be installed on the VectorStar instrument desktop or on a Windows XP/Windows 7 PC. Installation Instructions: Unzip the folder NoiseFigureUncertaintyCalculatorInstaller.zip If running, close the VectorStar application. Run setup.exe and follow the instructions. If the installation requests a reboot, please reboot. Notes: The VectorStar application may start after a reboot. If the Uncertainty Calculator installation was not completed, please close the VectorStar application. Installation instructions may not be visible with the VectorStar application running. A desktop shortcut is not automatically created during installation.

驱动程序/软件下载 exe 78.8 MB Version: 1.0.1 2017/1/10

Cal Kit File Maker

The Cal Kit File Maker program provides all the files necessary to create a calibration kit file for the VectorStar, Lightning and ShockLine VNAs. The program provides a convenient set of menus for entering the required information for the different standards in the calibration kit. The program does not perform calculations, it takes the input provided and creates files in the appropriate format.

驱动程序/软件下载 zip 4.5 MB Version: 2.02 2016/4/26

按产品类别

未找到结果
Confirm your country below to see local events, contact information and special offers.