Skip to main content

下载中心

按产品型号搜索

按文档类型

VectorStar MS464xB Product Information, Compliance, and Safety

This guide provides warranty, safety and regulatory compliance information for the VectorStar Series VNA products. P/N: 10100-00063

技术指标 pdf 2.0 MB Version: M 2022/8/9

VectorStar Broadband/Banded Millimeter-Wave Module Reference Manual

This Reference Manual provides information about the VectorStar Broadband/Banded Millimeter-Wave Modules. These modules are used with the ME7838 Series VectorStar Broadband/Banded Millimeter-Wave VNA Systems. P/N: 10410-00311

快速参考指南 pdf 7.9 MB Version: J 2022/8/9

VectorStar ME7838 Series 2-Port Broadband/Banded Millimeter-Wave VNA Maintenance Manual

This manual provides general service and maintenance instructions for Anritsu ME7838 Series Broadband/Millimeter-Wave Vector Network Analyzer System. P/N: 10410-00306

维护手册 pdf 6.4 MB Version: J 2022/8/9

VectorStar MS464xB Programming Manual

This manual provides information for remote operation of the VectorStar MS4640B Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus, USB, and Ethernet. P/N: 10410-00322

编程手册 pdf 30.8 MB Version: AC 2022/8/9

VectorStar VNA ME7838G Series Technical Data Sheet

Through the use of a novel coaxial-mode interface connector and advanced transceivers, broadband frequency coverage beyond 220 GHz is now possible. The ME7838G allows a continuous, broadband frequency sweep from 70 kHz to 220 GHz without the need to concatenate multiple systems (operational from 40 kHz to 226 GHz). P/N: 11410-01060

技术指标 pdf 4.4 MB Version: F 2022/8/9

VectorStar ME7838A Series Technical Data Sheet

This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-00593

技术指标 pdf 6.0 MB Version: W 2022/8/9

VectorStar ME7838E Series Technical Data Sheet

This technical data sheet provides technical specifications for the VectorStar ME7838E Series Multiport Broadband Vector Network Analyzers. P/N: 11410-00767

技术指标 pdf 6.7 MB Version: R 2022/8/9

VectorStar ME7838D Series Technical Data Sheet

High Performance, Broadband Network Analysis Solutions, ME7838D Series Microwave Vector Network Analyzers Technical Data Sheet. P/N: 11410-00778

技术指标 pdf 4.7 MB Version: R 2022/8/9

VectorStar VNA Spectrum Analyzer Option 49 Application Flyer

This Application Flyer explains how VectorStar's option 49 can help users make both VNA based S-parameter measurements and spectrum measurements in a single connection with ease and accurate results on a Vector Network Analyzer. P/N: 11410-02884

传单 pdf 1.4 MB Version: A 2022/8/9

VectorStar E and W Band Millimeter-Wave VNA System Quick Fact Sheet

The VectorStar E and W band mmWave system incorporates the high-performance, compact Anritsu mmWave modules in an economical extended E or W band configuration. P/N: 11410-00672

产品手册 pdf 951.2 KB Version: J 2022/8/9

VectorStar 2 and 4-port Millimeter-Wave Quick Fact Sheet

This two page quick fact sheet lists out the different configurations for the ME7838A 2-port and 4-port Millimeter-Wave (mmWave) Systems. P/N: 11410-00670

产品手册 pdf 942.5 KB Version: E 2022/8/9

ME7838AX/A4X Technical Data Sheet

This Technical Data Sheet provides the specifications for the VectorStar Broadband System ME7838AX 2-port and ME7838A4X 4-port Vector Network Analyzer. P/N: 11410-02825

技术指标 pdf 9.1 MB Version: B 2022/8/9

ME7838EX/E4X Technical Data Sheet

This Technical Data Sheet provides the specifications for the VectorStar Broadband System ME7838EX 2-port and ME7838E4X 4-port Vector Network Analyzer. P/N: 11410-02827

技术指标 pdf 8.6 MB Version: B 2022/8/9

366xX-1 Verification Kits and 2300-579-R Performance Verification Software Application

This manual supports the VectorStar 366xX-1 Verification Kits and the Anritsu 2300-579-R Performance Verification Software (PVS). This software is provided on a USB Memory Device that is included with the four verification kits. P/N: 10410-00270

用户手册 pdf 14.8 MB Version: H 2022/8/9

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

综合产品手册 pdf 13.3 MB Version: AD 2022/7/26

Anritsu and Polar Instrument Solution for Delta-L 4.0 Measurement Based on Atlas SI Software with Anritsu 4-Port Benchtop VNAs Solution Flyer

This solution flyer discusses how the Polar Instrument solution and Anritsu VNAs have unique capabilities for making Delta-L PCB measurements which helps customers make quick and accurate measurements results. P/N: 11410-02880

产品手册 pdf 1.8 MB Version: A 2022/5/11

0.8 mm Connectors, 0.8 Adapters, and Terminations Technical Data Sheet

The 0.8 mm Connector family is a complete coaxial connector system with single-mode performance to 145 GHz. It contains male and female non-hermetic connectors, male and female broadband terminations and in-series adapters. P/N: 11410-00317

技术指标 pdf 826.6 KB Version: B 2022/2/25

Anritsu and SWISSto12 Material Measurements Solution

The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with the SWISSto12 MCK systems, and are ideal for active and passive material measurements. P/N: 11410-01167

传单 pdf 1.1 MB Version: C 2022/1/27

Anritsu and Compass Technology Group Material Measurements Solution

The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with Compass Technology hardware fixtures and CTG software systems, and make an ideal solution for material measurements. P/N: 11410-01182

传单 pdf 1.5 MB Version: C 2022/1/27

Anritsu and Keycom Material Measurement Solution

Anritsu’s ShockLine and VectorStar series vector network analyzers are now compatible with all the available solutions from Keycom Technologies for various types of material measurements methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and many more. P/N: 11410-01191

传单 pdf 1.4 MB Version: C 2022/1/27

按文档类型

MS4640B VectorStar Application (Software and DSP Firmware)

Unzip the downloaded file into a flash drive. Important: New software installation instructions are included. Please be sure to read the "VectorStar How To Install" document before installing.

驱动程序/软件下载 zip 431.0 MB Version: 2022.6.1 2022/8/9

Exact Uncertainty Calculator

This software can be used to calculate and plot Transmission and Reflection, Magnitude and Phase, measurement uncertainty, for VectorStar and ShockLine and family VNAs. It takes into consideration different calibration methods and kits, different conditions such as IF BW, and non-zero s11, s22, and s21, s12 conditions for transmission and reflection uncertainties respectively.

驱动程序/软件下载 exe 760.5 KB Version: 2021.7.1 2021/7/20

VectorStar Application Installation

This version of software (and any other software version 2.1.0 and later, including those of format V201x.x.x) requires installation of Bittware 8.33 on the VNA prior to installation of the VectorStar application. Installation of Bittware is only needed once and does not need to be reinstalled at every VectorStar application installation. Please refer to Appendix A in this document for details about Bittware versions and installation of this driver. VectorStar-How-To-Install

驱动程序/软件下载 pdf 107.3 KB 2020/5/21

CapVNA for VectorStar VNA

CAPVNA is a Windows program to capture, display, save and print the graphical and textual data from VectorStar VNAs. The displayed data can be loaded from a flash drive where it was previously saved at the VNA or captured directly from the VNA over the GPIB port. The displayed data can be saved in a variety of formats to the PC's internal disk drive or a network drive and printed to a local or network printer(including color).

驱动程序/软件下载 exe 3.6 MB Version: 1.0.1 2017/9/18

VectorStar MS4640B Download WannaCry Security Patch

Security patch for the MS4640B Series VectorStar Vector Network Analyzers.

驱动程序/软件下载 zip 19.9 MB Version: 1.0 2017/8/3

Windows GPIB (Version 3.79)

WindowsGPIB is a Windows®-based program that sends and receives program data over GPIB, in response to commands entered from the keyboard or from a command file, similar but friendlier than NI's WIBIC. It is a good tool for testing mnemonics and commands while developing ATE programs. Windows GPIB supports only NI GPIB.

驱动程序/软件下载 exe 4.1 MB Version: 3.79 2017/1/10

Noise Figure Uncertainty Calculator

The VectorStar Noise Figure Uncertainty Calculator is a standalone program used to provide the user a tool for easily determining measurement uncertainty while using the VectorStar VNA Option 041 – Noise Figure. The calculator can be installed on the VectorStar instrument desktop or on a Windows XP/Windows 7 PC. Installation Instructions: Unzip the folder NoiseFigureUncertaintyCalculatorInstaller.zip If running, close the VectorStar application. Run setup.exe and follow the instructions. If the installation requests a reboot, please reboot. Notes: The VectorStar application may start after a reboot. If the Uncertainty Calculator installation was not completed, please close the VectorStar application. Installation instructions may not be visible with the VectorStar application running. A desktop shortcut is not automatically created during installation.

驱动程序/软件下载 exe 78.8 MB Version: 1.0.1 2017/1/10

按产品类别