Skip to main content
MENU

High Speed Serial Data Test Solutions

Next-Generation Digital I/F Rx Tests

hssd-index-mainvisual

The spread of IoT devices and Cloud Computing services is causing explosive growth in data traffic handled by digital devices, in turn requiring faster serial device interfaces. The PCIe and USB interfaces used by digital devices are handling ever larger data volumes so the resulting next-generation PCI Express Rev 4.0 standard reaches higher speeds of 16 GT/s, while USB3.1 Gen 2 supports 10 Gbit/s, and USB3.1 Type-C is also compatible with Thunderbolt which also supports 20 Gbit/s.

Target Applications

Multi-interface Support using Wideband MP1800A/MP1900A BERT

With 32 Gbit/s PPG, ED, jitter and noise addition functions, and a full lineup of application software, the Signal Quality Analyzer MP1800A supports every measurement need for high-speed, next-generation, digital interfaces (CEI-28G/56G, InfiniBand, 100/400G Ethernet, Fibre Channel, Thunderbolt 3, PCI Express, USB) from early development through production.

Multi-interface Support using Wideband MP1800A BERT

 

High Speed Interface Receiver Test Solutions

Installing this application software in the MP1800A/MP1900A supports generation of Link Sequence patterns required for evaluation of PCI Express and USB devices and Jitter Tolerance tests. The MX183000A can be used for SERDES IC Jitter Tolerance tests as well as for tests of digital equipment internal and external interfaces by generating the Link Sequence required for evaluation of devices supporting next generation PCI Express and USB standards.

 

Jitter Tolerance Test Function (MX183000A-PL001) mp1800a-iconmp1900a-icon

  • Supports versatile Jitter Tolerance measurements
  • Injects SJ/RJ/BUJ for PHY device Jitter Tolerance tests
  • Supports Mask measurements for various standards
  • Shortens measurement time using low-error-rate (1E-12, 1E-15, etc.) estimation function
  • Uses Binary, Upward, Downward, and Binary + Linear search methods to measure tolerance points dependent on device characteristics

Low-Rate Estimated BER Measurement
Low-Rate Estimated BER Measurement

 

PCI Express Link Sequence Generation Function (MX183000A-PL011) mp1800a-iconmp1900a-icon

  • Uses training sequence generation to set PCI Express Gen1 to 4 devices to Loopback state
  • Automates Pass/Fail evaluation of devices transitioned to Loopback state
  • Generates 8B/10B, 128B/130B, Scramble, SKIP Insertion

LTSSM Parameter Setting Screen
LTSSM Parameter Setting Screen

Pass/Fail Screen
Pass/Fail Screen

 

PCIe Link Training and LTSSM Analysis Function (MX183000A-PL021) mp1900a-icon

  • Protocol aware, all-in-one, PCI Express Gen 1 to 5 Receiver Test
  • Link Training and LTSSM Analysis functions
Anritsu MP1900A BERT Link Training
Supports physical layer measurements of add-in cards and system boards
  • Tx/Rx Link Equalization Response Test
  • Rx Link Equalization Test
  • Receiver Jitter Tolerance Test
Anritsu MP1900A BERT Link Training State transitions
Link Training State transitions
LTSSM Log LTSSM Log

 

USB Link Sequence Generation Function (MX183000A-PL012) mp1800a-icon

  • Sets Link Sequence, Sequence type, and test pattern, and transitions to Loopback mode for evaluating USB3.1 Gen1, Gen 2 devices
  • Generates 8B/10B, 128B/132B, Scramble, SKIP Insertion, LFPS

Link Sequence Setting Screen
Link Sequence Setting Screen

LFPS Setting Screen
LFPS Setting Screen

 

USB Link Training (MX183000A-PL022) mp1900a-icon

  • Protocol aware, all-in-one, USB3.1 Rx test solution
  • Link Training and LTSSM Analysis
Controls transition to Loopback (Link Training function)
Controls transition to Loopback (Link Training function)
Supports Link troubleshooting (LTSSM Analysis function)
Supports Link troubleshooting (LTSSM Analysis function)

 

Software

Item PCI Express USB Thunderbolt General
Calibration
mp1900a-icon*
GRL-USB31-RXA
mp1800a-iconmp1900a-icon*
GRL-TBT3-RXA
mp1800a-iconmp1900a-icon*
Link Sequence Generation MX183000A-PL011
mp1900a-icon
MX183000A-PL012
mp1800a-icon
Link Training MX183000A-PL021
mp1900a-icon
MX183000A-PL022
mp1900a-icon
Jitter Tolerance Test Pass/Fail GRL-USB31-RXA
mp1800a-icon
GRL-TBT3-RXA
mp1800a-icon
Margin MX183000A-PL001
mp1900a-icon
MX183000A-PL001
mp1800a-iconmp1900a-icon
MX183000A-PL001
mp1800a-iconmp1900a-icon
*: Please Contact our Business Section about MP1900A support.

 


 

在下面确认您所在国家,以查看当地活动、联系信息和优惠活动。