Skip to main content

下載中心

按產品型號搜尋

按文件類型

C-RAN Solutions Brochure

Transport, Optical & RF Testing for all Elements of the C-RAN Network. Anritsu has a long history of testing all aspects of the C-RAN. Our instruments evolve to meet the new challenges of testing the C-RAN networks being rolled out today. Put our experience to work for you!

摺頁冊 pdf 3.2 MB Version: B 2018/3/29

Understanding IBW In-Building Wireless: DAS to Small Cells Application Note

The purpose of an in-building wireless (IBW) system is to provide enhanced network coverage and/or capacity when the existing macro network is not able to adequately service the demand. Coverage may be poor due to high penetration losses caused by the building structure or due to low emissivity glass installed to improve the thermal performance of the building. In dense urban environments, adjacent buildings may create an RF barrier that blocks coverage from nearby macro sites. Tall buildings typically have poor coverage on upper floors since macro site antennas, many floors below, are specifically designed to suppress energy radiating above the horizon. Capacity may be an issue in venues such as stadiums, coliseums and convention centers where many thousands of users may be trying to simultaneously access the network.

應用說明 pdf 1.8 MB Version: C 2018/3/28

Installation, Maintenance and Optimization Solutions Flyer

A small 2 page flyer to showcase the right tools needed to achieve best in class network reliability.

傳單 pdf 3.0 MB Version: D 2018/3/28

ACCESS Master MT9083 Series

Technicians maintaining diverse systems are forced to carry a large variety of test equipment on-site, including OTDRs, Light Sources, Optical Power Meters, Visible Light Sources, etc., as well as a notebook computer for evaluating the FTTx QoS. On the other hand, fiber construction requires measuring instruments with different functions and performance.In addition, core and backbone networks utilize long fibers while optical access networks use short fibers, both requiring different types of measuring instruments with different performance.But now Anritsu's new line of MT9083 ACCESS Master OTDRs solves all these problems by providing all the measurement functions and performance required for optical fiber construction and maintenance in a compact, lightweight, all-in-one unit that eliminates the burden of carrying many different test sets and instruments on-site.

摺頁冊 pdf 2.8 MB 2018/2/15

MX900030A Connector Master Operation Manual

The MX900030A Connector Master is the software to observe, analyze, and make a pass-fail judgment of the fiber optic connector endface by personal computer using the G0306A Video Inspection Probe.

作業手冊 pdf 647.3 KB Version: Fourth 2017/6/1

Why do I need to inspect and/or clean the fiber in an optical BBU/RRH link?

After ruling out traditional problems like passive intermodulation (PIM), poorly aimed antennas and/or other coaxial problems, dirty fiber connectors account for 60 to 75% of the alarms, failures, and poor throughput problems found in modern cellular systems today.

應用說明 pdf 2.4 MB Version: A 2016/12/13

MT9083 Series ACCESS Master Remote Control Operation Manual

The remote control function sends commands via the communications interface from the remote control PC to set the measuring instrument and read the measurement results and measuring instrument conditions.

作業手冊 pdf 1.2 MB Version: 4th 2016/9/30

MT9083 Series ACCESS Master Operation Manual

The MT9083 Series ACCESS Master Optical Time Domain Reflectometer (OTDR) reduces the time to install, commission and maintain fiber spans via high performance hardware and easy-to-use software.

作業手冊 pdf 7.3 MB Version: 20th 2016/9/30

Installation, Maintenance and Optimization Solutions Brochure

Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class.

摺頁冊 pdf 4.5 MB Version: E 2016/7/12

Video Inspection Probe G0306B

Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality. The Video Inspection Probe G0306B can be connected to the Network Master MT1000A/MT1100A Series, the ACCESS Master MT9083x2 Series, uOTDR MT9090A Series product and PC, to show the state of a ferrule endface. This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.

傳單 pdf 1.1 MB 2016/4/15

USB 400x Video Inspection Probe G0306B

Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality. The Video Inspection Probe G0306B can be connected to the Network Master MT1000A/MT1100A Series, the ACCESS Master MT9083x2 Series, uOTDR MT9090A Series product and PC, to show the state of a ferrule endface. This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.

產品介紹 pdf 1.7 MB 2016/4/15

Testing Distributed Antenna Systems (DAS) Application Note

DAS can encompass Fiber Optic Cables, RF Cables, Fiber Optic (PON) Splitters, RF Splitters, Radiating Cables, Amplifiers and all of these components can be in one single system. Each system will be as unique as the facility to which it will be installed. There is no simple "one size fits all" solution to testing a DAS, but if you break it down, it can be effectively tested and troubleshot. This application note breaks down these various types of components. P/N: 11410-00887

應用說明 pdf 4.9 MB Version: A 2015/11/2

Fiber Visualizer Enhancements

"Fiber Visualizer" is a new fault location function designed to simplify the entire testing process. Fiber Visualizer automatically selects the testing parameters to ensure the correct setup and provides a simple, graphical summary of the fiber under test within seconds. A comprehensive PDF report can then be customized and generated, completing the testing process. Recent enhancements provide better event detection and accuracy as well as individualized PASS/FAIL analysis to simplify your FTTx/PON testing.

傳單 pdf 386.6 KB 2015/4/9

USB 400x Video Inspection Probe G0306A

Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality. The Video Inspection Probe G0306A can be connected to the Network Master MT1000A/MT1100A Series, the ACCESS Master MT9083x2 Series, uOTDR MT9090A Series product and PC, to show the state of a ferrule endface. This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.

產品介紹 pdf 1.4 MB 2014/5/28

OPTION-545VIP USB 200/400x Video Inspection Probe

Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality. The OPTION-545VIP can be connected to an MT908x Series ACCESS Master, MT9090A Network Master Series product and PC, to show the state of a ferrule endface. This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.

產品介紹 pdf 1.5 MB 2014/3/24

Fiber Visualizer

“Fiber Visualizer” is a new fault location function designed to simplify the entire testing process. Fiber Visualizer automatically selects the testing parameters to ensure the correct setup and provides a simple graphical summary of the fiber under test within seconds. A comprehensive PDF report can then be customized and generated, completing the testing process.

傳單 pdf 508.8 KB 2013/5/28

MX900021A Remote Screen Software Operation Manual

The MX900021A screen display software is software to display the MT9083 Series ACCESS Master screens to a personal computer via USB.

作業手冊 pdf 1.6 MB 2013/4/23

G0293A USB 400x Video Inspection Probe

Scratches and stains to optic fiber ferrule endfaces are often said to have a negative impact on transmission quality. The G0293A can be connected to an MT908x Series ACCESS Master, MT9090A Network Master Series product and PC, to show the state of a ferrule endface. This function is effective for determining whether a ferrule endface is clean, and whether connector replacement is necessary due to connector scratches.

產品介紹 pdf 1.5 MB 2013/2/22

MT9083A2/B2/C2 ACCESS Master

Anritsu is now pleased to announce the enhanced MT9083A2/MT9083B2/MT9083C2 models. The ACCESS Master MT9083x2 now features a 7-inch widescreen TFT-LCD display for use both indoors and outdoors, enhanced battery operation time (up to 12 hours), increased operating temperature range (-10 to 50 oC) and new short-cut function keys.

傳單 pdf 283.8 KB 2012/8/24

按文件類型

MX9083x2_Firmware_v210_E

Firmware and documents for MT9083x2 are contained in the zip file.

MD5 : 22610480dc05a8c44528cc6ac785279e

驅動程式/軟體下載 zip 37.4 MB Version: 2.10 2018/10/4

Previous Version Firmware for MX9083x2

Previous Version Firmware and documents for MT9083x2 are contained in the zip file.

MD5 : e38587d59091e7c68e932b3bc270d97f

驅動程式/軟體下載 zip 37.5 MB Version: 2.09 2018/5/8

MX900030A_Connector Master_v104_E

Software and documents for MX900030A Connector Master are contained in the zip file.

MD5 : 9e3b1b0c670025de778872e8bc09f15a

驅動程式/軟體下載 zip 43.1 MB Version: 1.04 2017/6/1

MX9083_v548_E

The following Firmware and documents for MT9083x/MT9083x1 are contained in the zip file (v5.48).

MD5 : aba428f7d2e8b4018ea61f9926f773a8

驅動程式/軟體下載 zip 8.8 MB Version: 5.48 2016/9/15

MT9083Series_RemoteScreenSoftware_MX900021A_v101_E

The following Software for MT9083 series are contained in the zip file.

驅動程式/軟體下載 zip 52.7 KB Version: 1.01 2012/6/28

按產品類別

未找到記錄
在下面確認您所在國家/地區,以查看當地活動、聯絡資訊和特惠活動。