Skip to main content

下載中心

按產品型號搜尋

按文件類型

Multiport VectorStar MN469xC Technical Data Sheet and Configuration Guide

This document provides the specifications for the MN469xC series Multiport Vector Network Analyzers test sets when used in conjunction with the 2-port VNA. P/N: 11410-00777

資料表 pdf 3.3 MB Version: E 2019/8/13

VectorStar MN469xC Series Multiport Test Set Maintenance Manual

This manual provides general service and maintenance instructions for Anritsu MN469xC Series Multiport Test Set. It contains procedures for: testing the system for proper operation, verifying system performance in conjunction with a 2-port MS4640A or MS4640B VectorStar VNA, troubleshooting tests and techniques, and locating and replacing failed parts in the MN469xC Series Test Set.

維護手冊 pdf 8.9 MB Version: C 2018/3/27

366xX-1 Verification Kits and 3-2300-527 (67688) Performance Verification Software for VectorStar MS4640B Series VNAs

This quick start guide provides a brief overview of the installation and use of 366xX-1 Verification Kits and the 2300-579 Performance Verification Software (PVS) with VectorStar MS4640A/B Series VNAs.

Refer to the VectorStar MS4640A/B Series 366xX-1 Verification Kits and 2300-579 PVS User Guide – 10410-00270 for detailed information about safety, installation, configuration, setup, and verification testing.

快速入門指南 pdf 1.1 MB Version: F 2017/10/4

VectorStar 2300-531-R MS464x Instrument Test Software Quick Start Guide

This quick start guide provides a brief overview of the installation and use of the Anritsu 2300-531-R MS464x Instrument Test Software for use with the VectorStar MS4640A/B Series Vector Network Analyzer. P/N:10410-00291

快速入門指南 pdf 568.6 KB Version: D 2016/9/8

VectorStar MS4640A Series VNA Programming Manual

This manual provides information for remote operation of the VectorStar MS4640A Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB, and Ethernet.

程式設計手冊 pdf 25.4 MB Version: L 2015/5/27

VectorStar MS4640A Series VNA Programming Manual Supplement

This programming manual supplement provides information for remote operation of the VectorStar MS4640A Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus (GPIB), USB and Ethernet for Anritsu Lightning 37xxxX and HP 8510 commands.

程式設計手冊 pdf 1.6 MB Version: C 2015/5/27

VectorStar MS4640A Series VNA User Interface Reference Manual

This manual provides a reference manual for the User Interface (UI) menus and dialog boxes in the VectorStar Series VNAs. In addition, this manual provides the context-sensitive portion of the instrument HELP system.

使用者手冊 pdf 63.8 MB Version: E 2015/5/27

VectorStar MS4640A Series VNA Operation Manual

Operation manual for VectorStar models MS4647A, MS4645A, MS4644A, and MS4642A.

作業手冊 pdf 13.4 MB Version: L 2015/5/27

MS4640A Series VectorStar Online Help System

Use Anritsu's Online Help System to learn more about the operation, programming and use of the MS4640A VectorStar Series of Vector Network Analyzers.

線上說明系統 htm 180.4 KB Version: L 2015/5/27

VectorStar MS4640A Series VNA Measurement & Calibration Guide

The purpose of this Measurement Guide is to introduce the basic calibration and operation of the VectorStar MS4640A Vector Network Analyzer (VNA) System and reduce the time required to become proficient at performing basic measurements.

度量指南 pdf 36.8 MB Version: L 2015/5/27

VectorStar MS4640A Series VNA Maintenance Manual

This manual provides general service and preventive maintenance information for the Anritsu MS4640A models of Vector Network Analyzers. The information includes replaceable parts information, performance verification tests, adjustment procedures, troubleshooting, theory of operation and block diagrams, and assembly/sub-assembly removal and replacement.

維護手冊 pdf 43.5 MB Version: D 2015/5/27

VectorStar MS464xA Series Technical Data Sheet & Configuration Guide

This document provides the specifications and configurations for the VectorStar MS4640A series of Microwave Vector Network Analyzers. P/N: 11410-00432

資料表 pdf 6.2 MB Version: F 2015/5/27

Precision AutoCal 36585 Series Reference Manual

This manual provides description and maintenance instructions for models 36585K (70 kHz to 40 kHz) and 36585V (70 kHz to 70 GHz) 2-Port AutoCal Calibration Kits.

維護手冊 pdf 1.5 MB Version: C 2015/5/27

Signal Integrity- Frequency Range Matters!

Higher data rates introduce new challenges for test solutions. This white paper discusses the importance of both high and low frequency test limits and also their impact on your time domain results. View the online version;

白皮書 pdf 959.2 KB Version: B 2013/8/19

Higher Data Rates Require New De-embedding Techniques

This white paper discusses the available de-embedding techniques and the tradeoffs between them.   View the online version

白皮書 pdf 1.2 MB Version: B 2013/8/19

Overcoming High-Speed Interconnect Challenges

Cloud computing, smart phones, and LTE services are causing a large increase in network traffic. The instantaneous traffic rates at internet data centers have reached 1 Tbit/s. To support this increased traffic, speed of IT equipment – such as those used in high-end services in data centers – must be increased.

白皮書 pdf 2.3 MB Version: B 2013/8/19

VectorStar® MN4690B Series Multiport Test Set

Read this Maintenance Manual to learn about the VectorStar MN4690B Series Multiport Test Set's general information, replaceable parts, performance verification, troubleshooting and more.

維護手冊 pdf 1.9 MB Version: B 2011/11/16

Multiport VectorStar MN4690B Installation Guide

This manual provides general information, installation, operating, and maintenance information for the VectorStar MN4690B Series Multiport Test Sets.

安裝指南 pdf 1.5 MB Version: B 2010/7/14

VectorStar MN4690B Series Multiport VNA Test Set Quick Start Guide

This quick start guide provides a brief overview of the MN4690B Multiport VNA System assembly.

快速入門指南 pdf 441.2 KB Version: A 2009/10/21

Vector Network Analyzer MN469xB Series Technical Specifications and Configuration Guide

Support documentation for the MN469xB Vector Network Analyzer. P/N: 11410-00528

資料表 pdf 1.4 MB Version: A 2009/9/16

按文件類型

VectorStar MS4640A Download WannaCry Security Patch

Security patch for the MS4640A Series VectorStar Vector Network Analyzers.

驅動程式/軟體下載 zip 336.0 MB Version: 1.0 2017/8/3

Noise Figure Uncertainty Calculator

The VectorStar Noise Figure Uncertainty Calculator is a standalone program used to provide the user a tool for easily determining measurement uncertainty while using the VectorStar VNA Option 041 – Noise Figure. The calculator can be installed on the VectorStar instrument desktop or on a Windows XP/Windows 7 PC. Installation Instructions: Unzip the folder NoiseFigureUncertaintyCalculatorInstaller.zip If running, close the VectorStar application. Run setup.exe and follow the instructions. If the installation requests a reboot, please reboot. Notes: The VectorStar application may start after a reboot. If the Uncertainty Calculator installation was not completed, please close the VectorStar application. Installation instructions may not be visible with the VectorStar application running. A desktop shortcut is not automatically created during installation.

驅動程式/軟體下載 exe 78.8 MB Version: 1.0.1 2017/1/10

Cal Kit File Maker

The Cal Kit File Maker program provides all the files necessary to create a calibration kit file for the VectorStar, Lightning and ShockLine VNAs. The program provides a convenient set of menus for entering the required information for the different standards in the calibration kit. The program does not perform calculations, it takes the input provided and creates files in the appropriate format.

驅動程式/軟體下載 zip 4.5 MB Version: 2.02 2016/4/26

VectorStar MS4640A Software and DSP Firmware

Note: Follow the instructions in the VectorStar How To Install document, before installing.

驅動程式/軟體下載 zip 3.8 MB Version: 1.7.10 2015/12/14

Capture VNA (version 2.60)

Capture VNA for VectorStar

驅動程式/軟體下載 13.65 MB Version: 2.60 2009/12/31

.Net/COM Driver

.Net/COM Driver for VectorStar.

驅動程式/軟體下載 834.44 KB 2009/12/31

C#, VectorStar Programming Examples (version 1.0)

驅動程式/軟體下載 2.04 MB 2009/12/31

按產品類別

未找到記錄
Confirm your country below to see local events, contact information and special offers.