Skip to main content

下載中心

按產品型號搜尋

按文件類型

Anritsu and SWISSto12 Material Measurements Solution

The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with the SWISSto12 MCK systems, and are ideal for active and passive material measurements. P/N: 11410-01167

傳單 pdf 532.8 KB Version: A 2020/5/28

Anritsu and Compass Technology Group Material Measurements Solution

The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with Compass Technology hardware fixtures and CTG software systems, and make an ideal solution for material measurements. P/N: 11410-01182

傳單 pdf 851.0 KB Version: A 2020/5/28

Anritsu and Keycom Material Measurement Solution

Anritsu’s ShockLine and VectorStar series vector network analyzers are now compatible with all the available solutions from Keycom Technologies for various types of material measurements methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and many more. P/N: 11410-01191

傳單 pdf 741.1 KB Version: A 2020/5/28

Anritsu's RF and Microwave Test and Measurement Solutions Product Brochure

Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800

摺頁冊 pdf 17.9 MB Version: W 2020/5/27

ShockLine MS46121A/B, MS46122A/B, MS46322A/B User Interface Reference Manual

This manual is a reference document for the Anritsu ShockLine VNA user interface (UI) menus and dialog boxes. This chapter describes the document conventions used in this manual and lists related ShockLine VNA documentation. P/N: 10410-00337

使用者手冊 pdf 32.5 MB Version: AC 2020/5/26

Material Measurements with Vector Network Analyzers Application Note

This application note will examine the issues component and device manufacturers and their engineers will face when designing their solutions in higher frequencies. P/N: 11410-01190

應用說明 pdf 3.9 MB Version: A 2020/5/26

Utilizing Line-Reflect-Line (LRL) Calibration Method to Measure a Surface-Mount Bandpass Filter on a Fixture Application Note

This application note introduces Line-Reflect-Line (LRL) calibration method to achieve an accurate measurement of the surface-mount device (SMD) when it is soldered onto a PCB fixture. The advantage of LRL calibration is that the calibration kit has the same material or dielectric constant and similar trace characterization as the fixture, which enables customers to readily fabricate the LRL calibration kit from the same lot as the fixture. P/N: 11410-01122

應用說明 pdf 1.4 MB Version: A 2020/4/28

Vector Network Analysis Product Portfolio

In 1965, Anritsu filed the patent that defined the first modern Vector Network Analyzer (VNA). We are proud to continue that tradition of innovation to the present day—with the world’s first portfolio of VNAs that bring Nonlinear Transmission Line (NLTL) technology to every measurement scenario from on-wafer device characterization to R&D testing to manufacturing and field operations. P/N: 11410-00905

摺頁冊 pdf 7.3 MB Version: J 2020/4/7

ShockLine Vector Network Analyzer Family Product Brochure

The ShockLine family of vector network analyzers (VNAs) achieve a new level of capability, flexibility, and value for RF and microwave network analysis applications. ShockLine VNAs deliver excellent performance for measurements from 50 kHz up to 43.5 GHz and banded E-band measurements from 55 GHz to 92 GHz. These instruments are ideal for testing passive and many active components with general purpose VNA requirements. P/N: 11410-01071

摺頁冊 pdf 2.8 MB Version: K 2020/4/1

ShockLine Vector Network Analyzers Selection Guide

The ShockLine Family of Vector Network Analyzers provide a broad range of solutions to meet your unique performance, application, and budget needs. P/N: 11410-01039

選取指南 pdf 2.9 MB Version: E 2020/4/1

Anritsu Automotive Product Lineup: Test Expertise for the Future of Transportation

This leaflet introduces our high performances testers for automotive markets and let our targets know Anritsu’s total automotive lineup at a glance. Easy QR codes linking to product websites to get more detail information.

傳單 pdf 3.4 MB 2020/2/12

Accessing 43.5 GHz Measurements with Traceability Application Note

This application note will explore: application drivers for 43.5 GHz development; connector fundamentals; what traceability is and why it is important; connectors for 43.5 GHz applications; and finally, current solutions on the market that can address 43.5 GHz operation with traceability. P/N: 11410-01165

應用說明 pdf 515.1 KB Version: A 2020/2/11

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

目錄 pdf 12.2 MB Version: W 2020/2/7

VNA Fundamentals Poster

This poster features sections on Circuits and Waves, S-Parameters, Reflection Coefficient, Phase and Group Delay, Non Linear Transmission Lines, VNA Architecture, Superposition/True Mode Stimulus, Time Domain, Pulse Measurements, and a Reflection Coefficient Table. P/N: 11410-00934

摺頁冊 pdf 13.4 MB Version: D 2020/1/29

Electro-Optical Measurements Using Anritsu VNAs

This paper presents an accurate, flexible and cost-effective technique to conduct electro-optical testing on fiber optic components, such as laser modulators and photodiodes, using VNAs. The simplicity of Anritsu’s MN4765B O/E calibration modules allows highly accurate, vector-error-corrected and stable measurements with the full line of Anritsu VNAs. P/N: 11410-01034

應用說明 pdf 343.8 KB Version: C 2020/1/24

ShockLine MS46xxxA/B and MS4652xB VNA Programming Manual

ShockLine VNAs supports remote operations commanded via the TCP/IP or VXI-11 protocols. This manual provides operation and programming information for this activity. P/N: 10410-00746

程式設計手冊 pdf 12.3 MB Version: U 2020/1/21

ShockLine MS46122A and MS46122B Series Operation Manual

Operation manual for the MS46122A and MS46122B series vector network analyzers. P/N: 10410-00340

作業手冊 pdf 8.2 MB Version: N 2020/1/21

ShockLine MS46122A/B and MS46322A/B Calibration and Measurement Guide

The purpose of this Measurement Guide is to introduce the basic calibration and operation of the ShockLine MS46122A/B, MS46131A, and MS46322A/B Series Vector Network Analyzer (VNA) and reduce the time required to become proficient at performing basic measurements. P/N: 10410-00336

度量指南 pdf 19.5 MB Version: P 2020/1/21

Factors in Choosing a VNA for Microwave Applications in Manufacturing Application Note

Many microwave test applications do not need the level of performance provided by an expensive, high-end VNA. This is particularly true in production, where testing is typically not as rigorous as in device characterization and cost-of-test is critical. VNAs integrated into manufacturing test systems where S-parameter measurements represent only a part of the test list, may also require only moderate performance. This application note will examine these requirements and how they factor in to deciding which VNA is appropriate for a production environment. PN: 11410-01158

應用說明 pdf 1.5 MB Version: A 2019/12/11

ShockLine Compact USB VNA MS46122B Technical Data Sheet

The MS46122B is part of the ShockLine family of Vector Network Analyzers. It is a very low-cost series of 1U high, 2-port Compact Vector Network Analyzers (VNAs). It is available in three frequency ranges. P/N: 11410-00995

資料表 pdf 2.9 MB Version: L 2019/7/31

按文件類型

ShockLine VNA Software

Download the latest software for the ShockLine VNA family. This software works with the B series: MS46121B, MS46122B, MS46322B, MS46522B and MS46524B, and the A series: MS46121A, MS46122A, MS46131A, and MS46322A. Note: This installation may require your host to be re-booted to support updates to existing drivers. This installation will require the insertion of services and drivers to your host. Please turn off all Web and Host Virus Detection Applications before starting the installation. Upon completion of the installation turn on your virus Detection Applications to their previous state.

驅動程式/軟體下載 exe 235.0 MB Version: v2019.12.3 2020/2/10

Software Release Note for the ShockLine VNAs

Software release note for the MS46121B, MS46122B, MS46322B, MS46522B, and MS46524B ShockLine family of Vector Network Analyzers.

驅動程式/軟體下載 pdf 142.3 KB Version: v2019.12.3 2020/2/10

IVI-C Installation Files

IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

驅動程式/軟體下載 exe 100.2 MB Version: v2019.12.1 2020/1/21

Release Note for IVI-C Driver

Release history for the IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

驅動程式/軟體下載 pdf 148.7 KB Version: v2019.12.1 2020/1/21

Cal Kit File Maker

The Cal Kit File Maker program provides all the files necessary to create a calibration kit file for the VectorStar, Lightning and ShockLine VNAs. The program provides a convenient set of menus for entering the required information for the different standards in the calibration kit. The program does not perform calculations, it takes the input provided and creates files in the appropriate format.

驅動程式/軟體下載 zip 4.5 MB Version: 2.02 2016/4/26

CapVNA for ShockLine VNAs

CAPVNA is a Windows program to capture, display, save and print the graphical and textual data from ShockLine VNAs. The displayed data can be loaded from a flash drive where it was previously saved at the VNA or captured directly from the VNA. The displayed data can be saved in a variety of formats to the PC's internal disk drive or a network drive and printed to a local or network printer (including color).

驅動程式/軟體下載 exe 519.3 KB Version: 2.6.9.6 2015/9/29

按產品類別

未找到記錄
Confirm your country below to see local events, contact information and special offers.