Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
目錄
pdf 12.2 MB
Version: W
2020/2/7
This documentation provides a description of the Anritsu Remote Spectrum Monitor MS2710xA software. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses SCPI programing, and covers a lists of SCPI programming commands. P/N: 10450-00052
線上說明系統
htm 185.0 KB
Version: J
2020/1/14
Download the complete user guide for the MS2710xA family of Remote Spectrum Monitors. Chapters include Graphical User Interface, How to, and Programming with SCPI. P/N: 10580-00419
使用者手冊
pdf 7.9 MB
Version: K
2020/1/14
This Technical data sheet includes the GPS, Yagi, Horn, Mag Mount, Wideband, Log Periodic, Whip, Bi-Blade, and Loop antennas. P/N: 11410-00376
資料表
pdf 3.9 MB
Version: P
2019/8/29
To communicate with the MS2710xA Remote Spectrum Monitor or to change its IP configuration, a PC must be correctly set up to communicate with the instrument via a direct connection using a static IP. This guide explains how to set this up. P/N: 10580-00414
快速入門指南
pdf 1.4 MB
Version: D
2019/7/10
There are various methods for geo-locating an RF signal of interest. Primary alternatives include Power of Arrival (POA), Time Difference of Arrival (TDOA), and Angle of Arrival (AOA). In most situations where modulated signal bandwidths are greater than 25 kHz, TDOA provides the best accuracy. This application note focuses on the use of TDOA as a means for tracking a signal. P/N: 11410-01133
應用說明
pdf 689.8 KB
Version: A
2019/7/10
The MS27103A is a multiple RF input spectrum monitor ideal for measuring signals from multiple antennas. The solution provides 12 RF input ports as a standard configuration and is typically used with a three-sector BTS cellular architecture with multiple carriers per sector. This is a quick overview of the features, key specifications, and options available. P/N: 11410-01086
摺頁冊
pdf 157.9 KB
Version: B
2019/1/24
With the large increase in mobile data traffic, network operators are moving the BBU (BaseBand Units) from macro cell sites to a common central location allowing greater flexibility and cost savings. The connection from the BBU to the RRH (Remote Radio Head) is most commonly via CPRI at rates between 614.4 kbps to 10,137.6 Mbps. P/N: 11410-00927
摺頁冊
pdf 55.2 MB
Version: C
2019/1/9
SpectraVision is a suite of software options and tools used with Anritsu’s MS2710XA product line of spectrum monitors. SpectraVision is a highly modular software system covering the entire frequency range of Anritsu's
Remote Spectrum Monitors. Various features incorporated into the software allow users to quickly perform automated analyses of the frequency spectrum, record measurements and generate optional reports detailing
signal quality and performance characteristics. P/N: 11410-00960
摺頁冊
pdf 3.4 MB
Version: C
2018/10/24
The MS27103A provides 12 RF Input ports as a standard configuration (24 RF Input ports are available with Option 424).
This model is typically used with three or six sector BTS architectures, with multiple carriers per sector. A high speed switch
is placed in the monitor to provide measurement capability for each RF input. A greater than 30 dB isolation is provided
between each RF Input port to assure the integrity of the measurement. P/N: 11410-00854
資料表
pdf 2.1 MB
Version: K
2018/10/3
Transport, Optical & RF Testing for all Elements of the C-RAN Network.
Anritsu has a long history of testing all aspects of the C-RAN. Our instruments evolve to meet the new challenges of testing the C-RAN
networks being rolled out today. Put our experience to work for you!
摺頁冊
pdf 3.2 MB
Version: B
2018/3/29
The purpose of an in-building wireless (IBW) system is to provide enhanced network coverage
and/or capacity when the existing macro network is not able to adequately service the
demand. Coverage may be poor due to high penetration losses caused by the building
structure or due to low emissivity glass installed to improve the thermal performance of the building. In dense urban environments, adjacent buildings may create an RF barrier that blocks coverage from nearby macro sites. Tall buildings typically have poor coverage on
upper floors since macro site antennas, many floors below, are specifically designed to
suppress energy radiating above the horizon. Capacity may be an issue in venues such as
stadiums, coliseums and convention centers where many thousands of users may be trying to
simultaneously access the network.
應用說明
pdf 1.8 MB
Version: C
2018/3/28
This solution brochure covers the four steps to success when interference hunting, as well as which Anritsu product/solution is suitable for each step in the process. P/N: 11410-00900
摺頁冊
pdf 2.5 MB
Version: B
2018/2/22
With the proliferation of cellular standards and new frequencies being assigned, operators face increasing challenges to keep their networks operating at an optimal level. Interference from a variety of sources leads to
dropped calls, slow data rates and poor network performance. Today's users want their applications to work anywhere and anytime, at the fastest data rates possible. Optimizing the user experience is therefore a primary
goal of network operators. This translates into customer loyalty, reduced customer churn and superior brand.
摺頁冊
pdf 2.1 MB
Version: D
2018/1/16
This documentation provides a description of the Anritsu’s Remote Spectrum Monitor (RSM) and Vision Software API’s. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses API programing, and covers a lists of API programming commands. API's are presented both for control of Anritsu's RSM hardware product line (MS2710XA) as well as for Vision software. Most features in Vision are paid options. In order for these options to work, the RSM hardware must have these options
enabled. Please see the Vision software Product Brochure and User Guide for option information.
程式設計手冊
pdf 2.2 MB
Version: B
2018/1/16
This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu MS2710xA series remote spectrum monitors. P/N: 10100-00064
資料表
pdf 1.2 MB
Version: D
2018/1/16
Positive Train Control (PTC) is an advanced communications system to minimize train accidents by automatically controlling train activity. This includes real-time monitoring of static and dynamic conditions that require the train to slow or stop.
Clifton Weiss & Associates, Inc. (CWA) was retained as professional consulting engineers to conduct a 3-year study of interfering RF signals on an actively operating Northeast commuter railway.
The Case Study talks about and discusses the challenges and solutions.
案例研究
pdf 1.7 MB
Version: A
2017/9/25
This manual provides maintenance instructions for Anritsu Remote Spectrum Monitor, Models MS27101A, MS27102A and MS27103A.
維護手冊
pdf 2.2 MB
Version: D
2017/8/30
The Remote Spectrum Monitor Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00041
資料表
pdf 24.4 KB
Version: A
2017/6/9
This Quick Start Guide provides the installation instructions and exercises that illustrate the use of Vision Remote Spectrum Monitor Software.
快速入門指南
pdf 3.7 MB
Version: C
2017/5/5
Technologies
