Skip to main content

下載中心

按產品型號搜尋

按文件類型

Measurement Software MX2690xxA / MX2830xxA / MX2840xxA / MX2850xxA series

This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.

摺頁冊 pdf 6.2 MB 2020/5/15

Signal Analyzer MS2690A/MS2691A/MS2692A

Product Introduction for the Signal Analyzer MS2690A/MS2691A/MS2692A

產品介紹 pdf 7.3 MB 2020/4/21

Software Package Install Simple Operation Guide

This guide explains the simple procedure for installing firmware in the Signal Analyzer MS2830A, MS2840A, MS2850A, MS2690A, MS2691A and MS2692A.

使用者手冊 pdf 576.7 KB 2020/4/13

Signal Analyzer MS2690A/MS2691A/MS2692A

The Signal Analyzer MS2690A/MS2691A/MS2692A (MS269xA) has the excellent general level accuracy, dynamic range and performance of a high-end spectrum analyzer.

摺頁冊 pdf 5.7 MB 2020/4/13

MX269xxxA series Software - Waveform Pattern MX2690xxA / IQproducer MX2699xxA

MS269xA Signal Analyzer and MS2830A Signal Analyzer supports a built-in Vector Signal Generator. The addition of the MS269xA-020 or MS2830A-020/021, Vector Signal Generator option to the MS269xA or MS2830A Signal Analyzer creates a powerful one-box tester that can be configured to support various communication technologies.

摺頁冊 pdf 5.4 MB 2020/4/8

MX285051A/MX269051A 5G Standard Measurement Software (Base License) Operation Manual

The MS2850A or MS269xA Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
The MX285051A/MX269051A 5G Standard Measurement Software (Base License) (hereinafter, referred to as “MX285051A/MX269051A”) allows measuring RF characteristics according to 5G standard by installing the software options such as MX285051A-001 Pre-Standard CP-OFDM Downlink.

作業手冊 pdf 1.2 MB Version: 4 2020/3/9

MX285051A-011/MX269051A-011 NR TDD sub-6GHz Downlink MX285051A-021 NR TDD mmWave Downlink MX285051A-061/MX269051A-061 NR TDD sub-6GHz Uplink MX285051A-071 NR TDD mmWave Uplink Operation Manual Operation

The MS2850A or MS269xA Signal Analyzer enables high-speed,high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
The MX285051A-011/MX269051A-011 NR TDD sub-6GHz Downlink,MX285051A-021 NR TDD mmWave Downlink,MX285051A-061/MX269051A-061 NR TDD sub-6GHz Uplink,and MX285051A-071 NR TDD mmWave Uplink (hereinafter, referred to as “MX285051A-011/021/061/071 and MX269051A-011/061”) are software options for measuring RF characteristics according to 5G NR Standard defined by 3GPP.

作業手冊 pdf 2.5 MB Version: 7 2020/3/9

MX285051A-011/MX269051A-011 NR TDD sub-6GHz Downlink MX285051A-021 NR TDD mmWave Downlink MX285051A-061/MX269051A-061 NR TDD sub-6GHz Uplink MX285051A-071 NR TDD mmWave Uplink Operation Manual Remote Control

This application can be controlled from an external controller (PC) by remote control commands using the MS2850A or MS269xA Signal Analyzer (hereafter referred to as “this instrument”). Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.

作業手冊 pdf 2.2 MB Version: 7 2020/3/9

MX285051A-031/MX269051A-031 NR FDD sub-6GHz Downlink MX285051A-081/MX269051A-081 NR FDD sub-6GHz Uplink Operation Manual Operation

The MS2850A or MS269xA Signal Analyzer enables high-speed,high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.

作業手冊 pdf 1.4 MB Version: 1 2020/3/9

MX285051A-031/MX269051A-031 NR FDD sub-6GHz Downlink MX285051A-081/MX269051A-081 NR FDD sub-6GHz Uplink Operation Manual Remote Control

This application can be controlled from an external controller (PC) by remote control commands using the MS2850A or MS269xA Signal Analyzer. Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.

作業手冊 pdf 1.8 MB Version: 1 2020/3/9

MX370113A/MX269913A 5G NR TDD sub-6GHz IQproducer Operation Manual

The MG3710A is a vector signal generator that includes an arbitrary waveform generator. It can be used for a wide range of applications, from R&D to manufacturing of digital mobile communication systems, devices, and equipment.
The MG3710A has the following features, and one MG3710A can address from the current major mobile communications to the next-generation mobile communications.

作業手冊 pdf 1.7 MB Version: 4 2020/3/9

MX370114A/MX269914A 5G NR FDD sub-6GHz IQproducer Operation Manual

MX370114A/MX269914A 5G NR FDD sub-6GHz IQproducer™ is software used to generate waveform patterns conforming to the 3GPP 5G NR specifications.

作業手冊 pdf 1.7 MB Version: 1 2020/3/9

Anritsu Automotive Product Lineup: Test Expertise for the Future of Transportation

This leaflet introduces our high performances testers for automotive markets and let our targets know Anritsu’s total automotive lineup at a glance. Easy QR codes linking to product websites to get more detail information.

傳單 pdf 3.4 MB 2020/2/12

Anti-Virus Measures for Instruments with Windows Operating System

We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.

白皮書 pdf 608.5 KB 2019/12/26

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual Spectrum Analyzer Function Operation

The MS2690A/MS2691A/MS2692A Signal Analyzer is a device used for the quick, highly accurate, and simple measurement of the transmission characteristics of various wireless devices and systems.
The spectrum analyzer function enables full-span analysis of a broad spectrum, which is a characteristic of conventional sweep type spectrum analyzers, and realizes quick and highly accurate signal processing through the use of a digital IF block. These features make the Spectrum Analyzer function ideal for various applications ranging from R&D to manufacturing.

作業手冊 pdf 8.1 MB Version: 46 2019/11/14

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual Spectrum Analyzer Function Remote Control

Automatic measurement can be performed by using this instrument in connection with an external controller (PC). This instrument is standard equipped with GPIB, Ethernet, and USB interfaces. You can also select a remote control command from the SCPI mode, which is a command format defined by the SCPI Consortium, and Native mode, which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for how to switch the language mode.
You can use the Native mode by converting SCPI commands into Native ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for details.

作業手冊 pdf 4.6 MB Version: 57 2019/11/14

MX269022A LTE TDD Downlink Measurement Software Operation Manual Operation

The MX269022A LTE TDD Downlink Measurement Software is a software option for measuring the RF characteristics of LTE TDD (Frame structure type 2) downlink signal specified by 3GPP, TS36.211 V8.6.0 (2009-03) Physical Channels and Modulation (Release 8).

作業手冊 pdf 2.3 MB Version: 21 2019/11/14

MX269022A LTE TDD Downlink Measurement Software Operation Manual Remote Control

This application can be controlled from an external controller (PC) by remote control commands using the MS2690A/MS2691A/MS2692A or MS2830A/MS2850A Signal Analyzer. Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.

作業手冊 pdf 2.1 MB Version: 18 2019/11/14

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual Mainframe Operation

The MS2690A/MS2691A/MS2692A Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of radio devices for various mobile communications types.
The MS2690A/MS2691A/MS2692A enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. In addition, the FFT process (high-speed Fourier conversion) realizes high-speed spectrum analysis and simultaneous analysis on frequency and time axes not possible with conventional sweep-type spectrum analyzers. It also records RF input signals as digital data (digitize function). It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.

作業手冊 pdf 9.8 MB Version: 50 2019/10/17

5G Solutions Catalog 2019 Vol. 2

Introduces Anritsu 5G solutions and products. Anritsu will contribute to customer's 5G product development and future innovation of network.

摺頁冊 pdf 3.1 MB 2019/7/17

按文件類型

MS269xA Software

Measurement software for MS269xA series (login, password is required.)

驅動程式/軟體下載 2020/3/9

MS269xA-020 IQproducer

PC software to create waveform pattern for MS269xA-020 optional vector signal generator (login, password is required.)

驅動程式/軟體下載 2013/12/2

MS2690 LabVIEW Driver Version 4.06.0

MS2690 LabVIEW Driver Version 4.06.0

驅動程式/軟體下載 39.7 MB 2011/7/1

MS2690 CVI Driver Version 3.2.0

MS2690 CVI Driver Version 3.2.0

驅動程式/軟體下載 zip 4.8 MB 2008/11/25

按產品類別

未找到記錄
Confirm your country below to see local events, contact information and special offers.