Skip to main content

下載中心

按產品型號搜尋

按文件類型

Opto-electronic Network Analyzer ME7848A Technical Data Sheet

The VectorStar Opto-electronic Network Analyzer (ONA) ME7848A-02xx system includes the VectorStar VNA combined with a traceable calibration O/E detector module and an E/O converter. The ME7848A ONA with the E/O converter and O/E calibration module detector enables the measurement of domain-transfer devices such as optical modulators, modulated lasers, optical transmitters, photodiodes, photo-receivers and transceivers. P/N: 11410-01145

資料表 pdf 7.6 MB Version: D 2020/6/5

Material Measurements with Vector Network Analyzers Application Note

This application note will examine the issues component and device manufacturers and their engineers will face when designing their solutions in higher frequencies. P/N: 11410-01190

應用說明 pdf 3.9 MB Version: A 2020/5/26

VectorStar ME7848A Series Opto-electronic Network Analyzer Maintenance Manual

This manual provides general service and maintenance instructions for the Anritsu ME7848A Opto-electronic Network Analyzer (ONA). P/N: 10410-00778

維護手冊 pdf 5.2 MB Version: A 2019/12/3

Electrical to Optical Converter MN4775A Quick Start Guide

Quick Setup Procedure. P/N: 10410-00779

快速入門指南 pdf 1.4 MB Version: B 2019/11/5

Electrical to Optical Converter MN4775A Operation Manual

The MN4775A Operation Manual covers the E/O Converter basic functions, safety considerations, user interface definitions, user controllable parameters, and basic troubleshooting. P/N: 10410-00774

作業手冊 pdf 8.5 MB Version: A 2019/11/5

Opto-electronic Network Analyzer Systems Quick Start Guide

This document describes the system components, basic connection and operation information, and some simple test steps to assure that the system is operating normally. P/N: 10410-00777

快速入門指南 pdf 2.0 MB Version: A 2019/11/5

Electrical to Optical Converter MN4775A Technical Data Sheet

The MN4775A is an electrical to optical converter that uses an RF input signal to intensity modulate an internal laser. The E/O converter is used in conjunction with the VectorStar MS464xB or the Shockline MS4652xB series VNAs and the MN4765B optical to electrical (O/E) converter to perform highly accurate and stable optoelectronic measurements of both modulators (E/O) and photoreceivers (O/E). P/N: 11410-01144

資料表 pdf 3.0 MB Version: C 2019/11/5

EU Declaration of Conformity for the E/O Converter MN4775A

This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00069

資料表 pdf 107.6 KB Version: A 2019/9/24

EU Declaration of Conformity for the Opto-electronic Network Analyzer ME7848A

This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00070

資料表 pdf 212.5 KB Version: A 2019/9/24

VectorStar Opto-Electronic Network Analyzer ME7848A Quick Fact Sheet

This two page flyer covers the key benefits and features of the opto-electronic network analyzer. P/N: 11410-01151

摺頁冊 pdf 609.0 KB Version: A 2019/9/24

按文件類型

MN4775A

This file contains the latest firmware for the MN4775A-0040, MN4775A-0070, and MN4775A-0071 E/O Converters. It also includes an MN4775A README file that tracks the firmware revision history and has instructions on how to download the firmware from a PC to a target MN4775A. Updating the firmware requires running the installation application on a computer running Windows 7, Windows 8, Windows 10, or Windows 2008 Server. The application also requires the computer to have the .NET framework, version 4.0 or later, installed.

驅動程式/軟體下載 zip 20.9 MB Version: v1.8.1 2019/11/19

按產品類別

未找到記錄
Confirm your country below to see local events, contact information and special offers.