This solution flyer discusses how the Polar Instrument solution and Anritsu VNAs have unique capabilities for making Delta-L PCB measurements which helps customers make quick and accurate measurements results. P/N: 11410-02880
摺頁冊
pdf 1.8 MB
Version: A
2022/5/11
The 0.8 mm Connector family is a complete coaxial connector system with single-mode performance to 145 GHz. It contains male and female non-hermetic connectors, male and female broadband terminations and in-series adapters. P/N: 11410-00317
資料表
pdf 826.6 KB
Version: B
2022/2/25
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
目錄
pdf 13.3 MB
Version: AC
2022/2/22
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with the SWISSto12 MCK systems, and are ideal for active and passive material measurements. P/N: 11410-01167
傳單
pdf 1.1 MB
Version: C
2022/1/27
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with Compass Technology hardware fixtures and CTG software systems, and make an ideal solution for material measurements. P/N: 11410-01182
傳單
pdf 1.5 MB
Version: C
2022/1/27
Anritsu’s ShockLine and VectorStar series vector network analyzers are now compatible with all the available solutions from Keycom Technologies for various types of material measurements methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and many more. P/N: 11410-01191
傳單
pdf 1.4 MB
Version: C
2022/1/27
This manual provides description and maintenance instructions for the Model 3656C W1 (1 mm) Calibration and Verification Kit and describes the use of the Anritsu Performance Verification Software (PVS). P/N: 10410-00784
使用者手冊
pdf 13.2 MB
Version: A
2021/10/1
This guide provides quick setup instructions for the ME7838A4 Multiport Broadband/Banded mmWave VNA System assembly. P/N: 10410-00735
快速入門指南
pdf 3.8 MB
Version: D
2021/9/14
This guide provides quick setup instructions for the ME7838D4 Multiport Broadband/Banded mmWave VNA System assembly. P/N: 10410-00770
快速入門指南
pdf 4.0 MB
Version: D
2021/9/14
This guide provides quick setup instructions for the ME7838E4 Multiport Broadband/Banded mmWave VNA System assembly. P/N: 10410-00771
快速入門指南
pdf 3.3 MB
Version: C
2021/9/14
This Reference Manual provides information about the VectorStar Broadband/Banded Millimeter-Wave Modules. These modules are used with the ME7838 Series VectorStar Broadband/Banded Millimeter-Wave VNA Systems. P/N: 10410-00311
快速參考指南
pdf 7.9 MB
Version: H
2021/9/14
This manual provides instructions for setup and initial test of the VectorStar ME7838A4 Multiport Broadband/Banded Millimeter Wave Vector Network Analyzer System. P/N: 10410-00734
安裝指南
pdf 8.6 MB
Version: E
2021/9/14
This manual provides general service and maintenance instructions for Anritsu ME7838x4 Multiport Broadband Millimeter-Wave Vector Network Analyzer System. P/N: 10410-00736
維護手冊
pdf 6.9 MB
Version: H
2021/9/14
This Measurement Guide provides instructions for using the 3744A-Rx mm-Wave Receiver Module for making noise figure measurements. P/N: 10410-00328
度量指南
pdf 1.8 MB
Version: C
2021/9/14
This manual provides information for remote operation of the VectorStar MS4640B Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus, USB, and Ethernet. P/N: 10410-00322
程式設計手冊
pdf 30.3 MB
Version: AB
2021/7/7
This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-01099
資料表
pdf 4.7 MB
Version: E
2021/7/6
This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00065
資料表
pdf 107.4 KB
Version: D
2021/7/6
This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-01100
資料表
pdf 4.9 MB
Version: E
2021/7/6
This technical data sheet provides technical specifications for the VectorStar ME7838A4 Series Multiport Broadband Vector Network Analyzers. P/N: 11410-00704
資料表
pdf 5.2 MB
Version: N
2021/7/6
The ME7838G4 allows a continuous, broadband frequency sweep, in a four-port setup, from 70 kHz to 220 GHz without the need to concatenate multiple systems (operational from 40 kHz to 226 GHz). P/N: 11410-01196
資料表
pdf 4.2 MB
Version: B
2021/7/6