Skip to main content

下載中心

按產品型號搜尋

按文件類型

CMA5 Fiber Optic Light Sources Operators Manual

Handheld units are designed for field installation, testing and commissioning of all types of optical fiber systems.

作業手冊 pdf 890.2 KB Version: 12 2020/10/29

CMA5 Fiber Optic Power Meters Operators Manual

Hand held units are precision meters designed to meet many testing applications.The CMA5 Series Fiber Optic Power Meters have calibrated wavelengths at 850, 1300, 1310, 1490, 1550 and 1625 nm. These units can measure absolute power in dBm, and microwatts (μW) along with attenuation (relative power) as dB. The general purpose 5P100 and 5P200 have a range of +10 to -60 dBm, while the 5P100C and 5P200C have a range of +23 to -50 dBm, which is ideal for CATV testing. All models have the ability to store the currently displayed dBm power level reading as a reference for subsequent measurements.

作業手冊 pdf 833.2 KB Version: 11 2020/10/29

CMA5 Series Optical Loss Tester Operators Manual

Handheld units are designed for the field installation, testing and commissioning of all types of optical fiber systems.

作業手冊 pdf 1.7 MB Version: 10 2020/10/29

Network Installation and Maintenance Testing Instruments

Introduces Anritsu Network Installation and Maintenance Testing Instruments products. This Solution Brochure is a document for Optical Measuring Instruments, Transport and Ethernet Testing, Mobile Wiress Communication Measuring Instruments, Signal Analyzers/Spectrum Analyzers, VNA, RF Micro products.

摺頁冊 pdf 1.3 MB 2020/10/8

Network Installation and Mainenace Testing Instruments Solutions

This Solution Brochure is a document for Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing , Mobile/Wireless communication measureing instruments, Signal Analyzers/Spectrum Analyzers, Vector network Analyzers and RF Microwave measuring instruments products.

摺頁冊 pdf 1.3 MB 2020/10/5

Optical & High-speed & Transport Testing Solutions

Introduces Anritsu Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products. This Solution Brochure is a document for Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products.

摺頁冊 pdf 4.5 MB 2020/4/21

Understanding IBW In-Building Wireless: DAS to Small Cells Application Note

The purpose of an in-building wireless system is to provide enhanced network coverage and or capacity when the existing macro network is not able to adequately service the demand. Coverage may be poor due to high penetration losses caused by the building structure or due to low emissivity glass installed to improve the thermal performance of the building. P/N: 11410-00885

應用說明 pdf 1.8 MB Version: C 2018/3/28

CMA5 Series Optical Loss Tester/Light Source/Optical Power Meter

The CMA5 series (Optical Loss Tester/Light Source/Optical Power Meter) measures optical loss and power for optical fiber I&M. The CMA5 series are compact and lightweight, its excellent cost performance and simple operation with the required minimum number of functions make it ideal for onsite I&M. Service engineers can choose from three models - optical loss tester, optical source, and optical power meter - to match the onsite application.

摺頁冊 pdf 932.9 KB 2012/7/19

按文件類型

未找到記錄

按產品類別

未找到記錄
Confirm your country below to see local events, contact information and special offers.