Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800
A small 2 page flyer to showcase the right tools needed to achieve best in class network reliability. P/N: 11410-00855
Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class. P/N: 11410-00617
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
This white paper outlines how PIM over CPRI works and how to get the most of out of this measurement technique. PIM over CPRI is your first step in determining if a site has PIM issues before calling in a PIM mitigation team. P/N: 11410-01135
To ensure good network performance, operators and technicians must verify PIM performance at both the 600 and 1900 MHz uplink frequencies when transmitting two 600 MHz tones. Testing outlined in this document shows that mitigating PIM issue on 600 MHz band does not guarantee the same for the 1900 MHz band. Testing PIM at both frequency bands is imperative in order to mitigate PIM issues in the field. P/N: 11410-01125
This Measurement Guide describes the operation of the PIM Master MW82119B, battery
operated PIM Analyzer for performing PIM measurements. P/N: 10580-00402
With the large increase in mobile data traffic, network operators are moving the BBU (BaseBand Units) from macro cell sites to a common central location allowing greater flexibility and cost savings. The connection from the BBU to the RRH (Remote Radio Head) is most commonly via CPRI at rates between 614.4 kbps to 10,137.6 Mbps. P/N: 11410-00927
The PIM Master MW82119B User Guide is part of a set of manuals that cover all of the
instrument functions and their use. The PIM Master with Site Master option is capable of
performing a wide variety of Passive Intermodulation (PIM) and Line Sweep measurements. This guide provides a quick-start section with a brief overview of the available PIM and Line Sweep measurements. P/N: 10580-00400
Four steps: clean, calibrate, verify residual, and verify PIM Standard. P/N: 11410-00726
Passive Intermodulation Analyzer with Site Master Cable and Antenna Analyzer option.
Suitable for commissioning and maintaining global wireless networks. This high performance, battery operated unit allows operators to fully characterize infrastructure quality by measuring Return Loss, VSWR, Cable Loss, Passive Intermodulation, Distance-to-Fault, and Distance-to-PIM with a single test instrument. P/N: 11410-00821
The PIM Master MW82119B with Site Master option provides an integrated test solution capable of certifying both PIM and
line sweep performance with a single test instrument. The PIM Master MW82119B solution offers the same ease-of-use,
ruggedness, and familiar menus as its predecessor, along with new features to enhance productivity and speed site testing. P/N: 11410-00824
2 page overview of the key specifications, optional accessories, and ordering information for the PIM Master. P/N: 11410-00831
This manual provides maintenance instructions for Anritsu PIM Master model MW82119B. P/N: 10580-00401
This SCPI Programming Manual provides information for remote operation of the PIM Master MW82119B, Passive Intermodulation (PIM) Analyzer, using commands sent from an external controller through the USB or Ethernet connection. P/N: 10580-00403
This document shows the specifications of the Low PIM Termination.
Poster showcasing the RF and Microwave Handheld analyzers options. Features Cable and Antenna Analyzers, Base Station Analyzers, Spectrum Analyzers, Vector Network Analyzers, and PIM Analyzers. P/N: 11410-00571
Transport, Optical & RF Testing for all Elements of the C-RAN Network.
Anritsu has a long history of testing all aspects of the C-RAN. Our instruments evolve to meet the new challenges of testing the C-RAN
networks being rolled out today. Put our experience to work for you!
The purpose of an in-building wireless (IBW) system is to provide enhanced network coverage
and/or capacity when the existing macro network is not able to adequately service the
demand. Coverage may be poor due to high penetration losses caused by the building
structure or due to low emissivity glass installed to improve the thermal performance of the building. In dense urban environments, adjacent buildings may create an RF barrier that blocks coverage from nearby macro sites. Tall buildings typically have poor coverage on
upper floors since macro site antennas, many floors below, are specifically designed to
suppress energy radiating above the horizon. Capacity may be an issue in venues such as
stadiums, coliseums and convention centers where many thousands of users may be trying to
simultaneously access the network.
This solution brochure covers the four steps to success when interference hunting, as well as which Anritsu product/solution is suitable for each step in the process. P/N: 11410-00900