The MS2840A Signal Analyzer (“the MS2840A” hereafter) is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The MS2840A enables high-speed and high-accuracy signal processing of
wide-ranging analyses at full-span, a characteristic of conventional
sweep-type spectrum analyzers, using a digital IF block. In addition, the
FFT process (high-speed Fourier conversion) realizes high-speed
spectrum analysis and simultaneous analysis on frequency and time axes
not possible with conventional sweep-type spectrum analyzers. Also,
added option enables recording of the RF input signal as digital data
(digitize function). It can be used in a variety of applications from
research and development to manufacturing thanks to its characteristics.
操作手册
pdf 7.7 MB
Version: 19
2021/5/13
This document describes type and size of memory and storage device inside Anritsu Signal Analyzer and Signal Generator
series in order to use safely the products against information security threat.
传单
pdf 119.3 KB
2020/11/3
Signal Analyzer MS2840A-040/041 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 3.6 GHz/6 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, dedicated options for MS2840A-040/041 greatly enhance their performance to exceed that of other makers’ high-grade models (–133 dBc/Hz at measurement frequency of 500 MHz and offset frequency of 10 kHz). The standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software, analog measurement software, vector/analog signal generator options support evaluation of various digital and analog wireless equipment/devices and also adds functions for measuring amplifier noise figure (NF) values.
产品手册
pdf 5.2 MB
2020/9/2
This White Paper outlines measuring instruments for testing the basic radio performance of pulse-radar transmissions used
mainly for meteorological observations and air traffic-control systems.
白皮书
pdf 1.0 MB
2020/6/3
This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.
产品手册
pdf 6.2 MB
2020/5/15
This guide explains the simple procedure for installing firmware in the Signal Analyzer
MS2830A, MS2840A, MS2850A, MS2690A, MS2691A and MS2692A.
用户手册
pdf 576.7 KB
2020/4/13
MS269xA Signal Analyzer and MS2830A Signal Analyzer supports a built-in Vector Signal Generator. The addition of the MS269xA-020 or MS2830A-020/021, Vector Signal Generator option to the MS269xA or MS2830A Signal Analyzer creates a powerful one-box tester that can be configured to support various communication technologies.
产品手册
pdf 5.4 MB
2020/4/8
We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.
白皮书
pdf 608.5 KB
2019/12/26
The MS2830A/MS2840A/MS2850A Signal Analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The spectrum analyzer function enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.
操作手册
pdf 11.0 MB
Version: 40
2019/11/14
Automatic measurement can be performed by using this instrument in connection with an external controller (PC). This instrument is standard equipped with GPIB, Ethernet, and USB interfaces. You can also select a remote control command from the SCPI mode, which is a command format defined by the SCPI Consortium, and Native mode, which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for how to switch the language mode.
You can use the Native mode by converting SCPI commands into Native ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for details.
操作手册
pdf 4.6 MB
Version: 57
2019/11/14
This Application Note explains issues in millimeter wave band measurements, and a new measurement method proposed by Anritsu.
应用指南
pdf 2.0 MB
2019/8/27
Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers, ranging from high-performance and multi-function, high-end models for R&D to handheld types for field use.
选择指南
pdf 2.9 MB
2019/6/28
This application can be controlled from an external controller (PC) by remote control commands using the MS269x Series, MS2830A or MS2840A Signal Analyzer. The remote control commands are defined by
the SCPI format.
操作手册
pdf 1.7 MB
Version: 25
2019/3/27
The MX269017A Vector Modulation Analysis software is a software
option for performing modulation analysis of modulated signals.
操作手册
pdf 7.5 MB
Version: 32
2019/3/27
The MS2830A, MS2840A, MS2850A Signal Analyzer is a spectrum analyzer to
which options such as real-time signal analysis and vector modulation
analysis can be added.
The signal analyzer application (hereinafter “this application”) enables
high-speed and high-accuracy signal processing of wide-ranging analyses
at full-span, a characteristic of conventional sweep-type spectrum
analyzers, using a digital IF block. In addition, the FFT process
(high-speed Fourier conversion) realizes high-speed spectrum analysis
and simultaneous analysis on frequency and time axes not possible with
conventional sweep-type spectrum analyzers. Also, added option enables
recording of the RF input signal as digital data (digitize function). It can
be used in a variety of applications from research and development to
manufacturing thanks to its characteristics.
操作手册
pdf 8.5 MB
Version: 23
2019/3/7
The MS2690/MS2691/MS2692A or MS2830A/MS2840A/MS2850A Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various types of mobile communications.
操作手册
pdf 2.3 MB
Version: 9
2019/3/7
Automatic measurement can be performed by using this instrument in
connection with an external controller (PC). This instrument is
standardly equipped with GPIB, Ethernet, and USB interfaces. You can
also select a remote control command from the SCPI mode, which is a
command format defined by the SCPI Consortium, and Native mode,
which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal
Analyzer Operation Manual (Mainframe Remote Control) for how to
switch the language mode.
You can use the Native mode by converting SCPI commands into Native
ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A
Signal Analyzer Operation Manual (Mainframe Remote Control) for
details.
To use the Signal Analyzer function on the MS2830A or MS2840A,
Analysis Bandwidth 10 MHz Option or greater is required.
操作手册
pdf 2.4 MB
Version: 36
2019/3/7
This operation manual describes the functions of the IQproducerTM, except for the signal generation application.
操作手册
pdf 4.5 MB
Version: 11
2018/11/5
This document explains the latest safety measures and procedures described in the instruction manual that customers should implement to secure Anritsu signal analyzers and signal generators running Windows
against malware. It also explains relevant instrument types and configurations.
传单
pdf 660.5 KB
2018/9/14
The MX269018A Analog Measurement Software is a software option used to measure the transmission and reception characteristics of radios which use analog modulation.
操作手册
pdf 5.2 MB
Version: 22
2018/8/16
