5G NR TDD sub-6GHz IQproducer is PC application software for vector signal generation to generate Uplink and Downlink patterns supporting the sub-6 GHz standard in the 3GPP 5G NR FR1 specifications.
This product Introduction for the 5G NR TDD sub-6GHz IQproducer describes the feature of IQproducer, the introduction of models which can be installed the IQproducer, and example of usage of utilizing with feature of models.
The MS2690A/MS2691A/MS2692A Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of radio devices for various mobile communications types.
The MS2690A/MS2691A/MS2692A enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. In addition, the FFT process (high-speed Fourier conversion) realizes high-speed spectrum analysis and simultaneous analysis on frequency and time axes not possible with conventional sweep-type spectrum
analyzers. It also records RF input signals as digital data (digitize function). It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.
The MG3710A is a vector signal generator that includes an arbitrary waveform generator. It can be used for a wide range of applications, from R&D to manufacturing of digital mobile communication systems, devices, and equipment.
The MG3710A has the following features, and one MG3710A can address from the current major mobile communications to the next-generation mobile communications.
The MS2850A or MS269xA Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
The MX285051A/MX269051A 5G Standard Measurement Software (Base License) (hereinafter, referred to as “MX285051A/MX269051A”) allows measuring RF characteristics according to 5G standard by installing the software options such as MX285051A-001 Pre-Standard CP-OFDM Downlink.
The MS2850A or MS269xA Signal Analyzer enables high-speed,high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
The MX285051A-011/MX269051A-011 NR TDD sub-6GHz Downlink,MX285051A-021 NR TDD mmWave Downlink,MX285051A-061/MX269051A-061 NR TDD sub-6GHz Uplink,and MX285051A-071 NR TDD mmWave Uplink (hereinafter, referred to as “MX285051A-011/021/061/071 and MX269051A-011/061”) are software options for measuring RF characteristics according to 5G NR Standard defined by 3GPP.
This operation manual describes the functions of the IQproducerTM, except for the signal generation application.
This application can be controlled from an external controller (PC) by remote control commands using the MS2850A or MS269xA Signal Analyzer (hereafter referred to as “this instrument”). Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.
The Signal Analyzer MS2690A/MS2691A/MS2692A (MS269xA) has the excellent general level accuracy, dynamic range and performance of a high-end spectrum analyzer.
This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.
MS269xA Signal Analyzer and MS2830A Signal Analyzer supports a built-in Vector Signal Generator. The addition of the MS269xA-020 or MS2830A-020/021, Vector Signal Generator option to the MS269xA or MS2830A Signal Analyzer creates a powerful one-box tester that can be configured to support various communication technologies.
This document explains the latest safety measures and procedures described in the instruction manual that customers should implement to secure Anritsu signal analyzers and signal generators running Windows
against malware. It also explains relevant instrument types and configurations.
The MS2690A/MS2691A/MS2692A Signal Analyzer can measure the transmitter characteristics of wireless devices for various types of mobile
communications quickly, accurately, and easily.
The Signal Analyzer function can achieve high-speed spectrum analysis
and simultaneous analysis on the frequency and time axes, which cannot
be achieved by a conventional sweep type spectrum analyzer, by using
FFT processing (fast Fourier transformation). Also, it can record the RF
input signal as digital data (digitize function).
The MS2690A/MS2691A/MS2692A Signal Analyzer is a device used for the quick,
highly accurate, and simple measurement of the transmission
characteristics of various wireless devices and systems.
The spectrum analyzer function enables full-span analysis of a broad
spectrum, which is a characteristic of conventional sweep type spectrum
analyzers, and realizes quick and highly accurate signal processing
through the use of a digital IF block. These features make the Spectrum
Analyzer function ideal for various applications ranging from R&D to
Automatic measurement can be performed in combination with an
external controller (PC). The MS2690A/MS2691A/MS2692A or MS2830A/MS2840A/MS2850
is equipped with GPIB, Ethernet and USB interfaces as standard.
The MX269017A Vector Modulation Analysis software is a software
option for performing modulation analysis of modulated signals.
This application can be controlled from an external controller (PC) by
remote control commands using the MS269x Series and MS2830A Signal
Analyzer. Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.
Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers, ranging from high-performance and multi-function, high-end models for R&D to handheld types for field use.
This guide explains the simple procedure for installing firmware in the Signal Analyzer
MS2830A, MS2840A, MS2850A, MS2690A, MS2691A and MS2692A.
We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.
This application can be controlled from an external controller (PC) by remote control commands using the MS269x Series, MS2830A or MS2840A Signal Analyzer. The remote control commands are defined by
the SCPI format.