The BERTWave series is designed especially for mass-production of optical modules and features an All-in-one BERT (for bit error rate measurement) plus sampling oscilloscope (for Eye pattern analysis) to help increase optical module production eﬃciency and cut costs.
BERTWave MP2100B是集误码率测试仪 (BERT) 和采样示波器于一体的多合一测试仪，能同步进行误码率 (BER)测量和眼图分析，有效缩短测量时间。而且，BER通道可扩充至4个并能 4 通道同步测量，快速采样模式实现了150k sample/s的高速测试。
BERTWave Series Remote Control Operation Manual
Version: 11th Edition
The all-in-one MP2100B BERTWave supporting simultaneous BER and eye-pattern measurements. BERTWave support 4ch simultaneous BER measurement and Scope sampling speed support 150 ksample/s. BERTWave is ideal for both R&D and manufacturing tests because it increases efficiency and reduces measurement costs.
Total Solution for Optical Module Evaluation / reduce Inspection Times and Improves Productivity MP2100B BERTWave MS9740A Optical Spectrum Analyzer.
In addition to using a BERT, sampling oscilloscope and spectrum analyzer, manufacturing inspection of optical modules and devices requires optical attenuators and optical switches. Anritsu’s product line of G0350 to G0355 series optical attenuators and G0344 to G0349 series optical switches is the total solution for evaluating optical modules and optical devices.
MX210001A Jitter Analysis Software Operation Manual
Version: Sixth Edition
The all-in-one BERTWave MP2100B also supports Total Jitter component analysis required for developing and manufacturing AOC. The AOC interface can be evaluated during simultaneous sending and receiving to simplify evaluation of AOC characteristics and transmission-path quality.
With a built-in BERT and sampling oscilloscope, the BERTWave MP2100B is the ideal, low-cost measurement solution for evaluating both the characteristics of optical transceivers and AOC, as well as transmission-path quality.
。BERTWave 系列是专为光模块/器件的大规模制造而特别设计，将 BERT（误码
The recent rapid increases in data volumes at network equipment, servers, and storage due to increasing use of smartphones, cloud computing, FTTx rollout, video streaming, etc., seem likely to increase even further in future. To cope with demand, many appliances and facilities are using digital signals exceeding the Gbit/s band. Dealing with these high-speed signals requires paying attention not only to the digital aspects but also to analog-type behavior, and care is required in choosing tools for monitoring these signals. This document discusses the key points when handling digital signals exceeding 10 Gbit/s from the perspective of measurement tools.
The Protection Adapters J1678A and J1679A are for protecting DUTs and measuring instruments against ESD/EOS and support high-reliability measurements.
本笔记介绍了利用 BERTWave 功能、快速测量光学模块和设备的标准远程序列。使用本笔记中描述的远程序列，可以从 BERTWave 内置的远程命令中选择最佳命令，配置用于制造光学模块和设备的简单测试系统。
This note introduces standard remote sequences making use of the BERTWave functions and speed to measure optical modules and devices. The remote sequences described in this note can be used to configure a simple test system for manufacturing optical modules and devices by selecting the best commands from remote commands built into the BERTWave.
MP2100B BERTWave Operation Manual
Version: Fourth Edition
Anritsu BERTs offer a wide variety of tools to
measure the quality of high speed digital signals. Measurements, such as BER, skew and crosstalk can be determined between up to 8 channels at 32 Gb/s. Various types of jitter can be injected to evaluate jitter tolerance. Clock recovery can be used when different Tx and Rx clocks are employed. During EYE mask test and "bathtub" curve derivation emphasis
and equalization can be applied to improve EYE
本文档介绍使用 MP2100B 功能并加速 QSFP+ 测量的一些远程序列。
使用本文档中所述的远程序列，可以从 MP2100B 远程命令中选择 QSFP+ 模块生产命令，帮助配置易于使用的光学模块测
Simultaneous Jitter, EYE Pattern and EYE Mask Measurements