Skip to main content
MENU

下载中心

按产品型号搜索

按文档类型

Anti-Virus Measures for Instruments with Windows Operating System

We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.

白皮书 pdf 608.5 KB 2019/12/26

MX370x series software - Waveform Pattern MX3700xxA

Each category contains multiple waveform pattern files each with preset parameters for each system. These default waveform patterns are saved on the MG3710A/B hard disk for easy access, but other waveform patterns are supported using the IQproducer waveform generation software.

产品手册 pdf 2.3 MB 2019/11/18

5 GHz Band WLAN Device DFS Tests - Support for FCC, ETSI, Japan MIC Standards

Installing the DFS Radar Patterns option MX370073B/MX370075A in the Vector Signal Generator MG3710E supports output of FCC, ETSI and Japan MIC standards DFS test signals. Output of complex combinations of pulse, chirp and hopping signals required to support DFS tests is made easy just by selecting combination files supplied with the MX370073B/MX370075A.

传单 pdf 944.7 KB 2019/11/18

DFS Radar Pattern MX370073B

Installing the DFS Radar Pattern MX370073B option in the Vector Signal Generator MG3710A/MG3710E supports output of FCC and Japan MIC standard DFS test signals. External PC not required. Simply selecting prepared waveform pattern outputs various signals using MG3710A/MG3710E built-in Sequence function. Offers 5.3-GHz band waveform patterns adopted by Japan MIC standard in July 2019

产品简介 pdf 1.1 MB 2019/10/30

DFS (ETSI) Waveform Pattern MX370075A

Installing the MX370075A DFS (ETSI) Waveform Patterns option in the MG3710A Vector Signal Generator supports output of ETSI EN 301 893 DFS test signals. Output of complex combinations of pulse and chirp signals required to support DFS tests is made easy just by selecting combination files supplied with the MX370075A.

产品简介 pdf 882.8 KB 2019/10/30

MX370x series software - IQproducer MX3701xxA

Parameters for the waveform for the target communication system are set using a GUI to a generate a waveform pattern file for the MG3710A. The embedded Windows application IQproducer saves generated arbitrary waveform pattern files to the internal hard disk and signals are output simply by selecting the waveform pattern. In addition, a user-generated custom IQ sample file in ASCII format created by common Electronic Design Automation (EDA) software such as MATLAB, can be converted into a custom waveform pattern file for the MG3710A.

产品手册 pdf 6.2 MB 2019/10/8

MG3710A/MG3710E Vector Signal Generator MG3740A Analog Signal Generator Operation Manual

The MG3710A/MG3710E is a vector signal generator that includes an arbitrary waveform generator. It can be used for a wide range of applications, from R&D to manufacturing of digital mobile communication systems, devices, and equipment. The MG3740A is an analog signal generator. It can be used for a wide range of applications, from R&D to manufacturing of analog radio base stations, devices, and equipment.

操作手册 pdf 22.2 MB Version: 18 2019/9/26

MG3710A/MG3710E Vector Signal Generator MG3740A Analog Signal Generator Help File

MG3710A/MG3710E Vector Signal Generator MG3740A Analog Signal Generator Help File
※If the Help file is not displayed correctly, right-click on the file and select Properties. Please unlock the security block setting.

操作手册 zip 11.4 MB Version: 18 2019/9/26

5G NR Sub-6 GHz Measurement Methods

5G mobile communications systems use multiple connections to meet the need for increases in mobile data traffic volumes as well as new functions such as ultra-low-latency. 3GPP determining the standards released the 5G NR non-standalone (NSA) specifications for making connections via multiple radio technologies, such as LTE, in Release 15 in June 2018. Release 15 presumes the use of frequency bands up to 52.6 GHz and specifies the band from 450 MHz to 6 GHz as FR1 (Frequency Range 1), and from 24.25 GHz to 52.6 GHz as FR2 (Frequency Range 2). FR1 assumes use of the same wired tests as conventional wireless technologies whereas FR2 assumes OTA (Over the Air) testing. This application note references the 3GPP TS38.104 and TS38.141 Conformance Test specifications, and introduces TRx test measurement examples for wired connections with sub-6 GHz base stations covering FR1 using the Signal Analyzer MS2850A and Vector Signal Generator MG3710A.

应用指南 pdf 1.7 MB 2019/8/21

MX370113A/MX269913A 5G NR TDD sub-6GHz IQproducer Operation Manual

The MG3710A is a vector signal generator that includes an arbitrary waveform generator. It can be used for a wide range of applications, from R&D to manufacturing of digital mobile communication systems, devices, and equipment.
The MG3710A has the following features, and one MG3710A can address from the current major mobile communications to the next-generation mobile communications.

操作手册 pdf 2.0 MB Version: 2 2019/3/6

MX370073B DFS Radar Pattern Operation Manual

MX370073B DFS Radar Pattern (hereafter “this waveform pattern”) contains standard waveform pattern conforming to the TELEC-T403 V12.1 and FCC06-96 (Released: June 30, 2006), FCC13-22 (Released: February 20, 2013) Dynamic Frequency Selection test. Downloading this waveform pattern to the MG3710A Vector Signal Generator (hereafter MG3710A) supports generation of radar pattern signals used at Rx Dynamic Frequency Selection (DFS) tests. Use of this waveform pattern requires a license corresponding to the serial number of the MG3710A using the pattern. When using this pattern on multiple MG3710A units, a license must be purchased for each MG3710A unit using this pattern.

操作手册 pdf 4.1 MB Version: 1 2019/3/6

Vector Signal Generator MG3710A

The MG3710A is a vector signal generator with 6 GHz upper frequency limit and 120 MHz wide RF modulation baseband generator. It outputs various radio systems signals for cellular communications, such as LTE FDD/TDD, W-CDMA, GSM as well as narrowband communications, such as WLAN, WiMAX, Bluetooth and GPS.

产品手册 pdf 4.8 MB 2018/12/19

Vector Signal Generator MG3710A

Configuration Guide for the MG3710A Vector Signal Generator

配置指南 pdf 1.3 MB 2018/12/19

5G NR TDD sub-6GHz IQproducer MX370113A / MX269913A

5G NR TDD sub-6GHz IQproducer is PC application software for vector signal generation to generate Uplink and Downlink patterns supporting the sub-6 GHz standard in the 3GPP 5G NR FR1 specifications. This product Introduction for the 5G NR TDD sub-6GHz IQproducer describes the feature of IQproducer, the introduction of models which can be installed the IQproducer, and example of usage of utilizing with feature of models.

产品简介 pdf 974.3 KB 2018/11/27

Signal Analyzer and Signal Generator Security Policy

This document explains the latest safety measures and procedures described in the instruction manual that customers should implement to secure Anritsu signal analyzers and signal generators running Windows against malware. It also explains relevant instrument types and configurations.

传单 pdf 660.5 KB 2018/9/14

Vector Signal Generator MG3710A

The MG3710A is a vector signal generator with 6 GHz upper frequency limit and 120 MHz wide RF modulation baseband generator. It outputs various radio systems signals for cellular communications, such as LTE FDD/TDD, W-CDMA, GSM as well as narrowband communications, such as WLAN, WiMAX, Bluetooth and GPS.

产品简介 pdf 4.7 MB 2018/5/30

MG3700A/MG3710A/MG3710E Vector Signal Generator MG3740A Analog Signal Generator Operation Manual (IQproducer)

The IQproducerTM is Windows application software used to generate a modulated waveform pattern to be used in the Vector Signal Generator MG3700A/MG3710A or the Analog Signal Generator MG3740A, which integrates an arbitrary waveform generator. The IQproducerTM for MG3700A/MG3710A/MG3740A also transfers the generated data to the MG3700A/MG3710A/MG3740A via LAN.

操作手册 pdf 3.8 MB Version: 16 2017/8/21

MX370102A/MX269902A TDMA IQproducer Operation Manual

This describes basic operations and functions of the TDMA IQproducer.

操作手册 pdf 3.8 MB Version: 12 2017/8/21

MX370104A/MX269904A Multi-carrier IQproducerTM Operation Manual

This describes basic operations and functions of the Multi-carrier IQproducerTM.

操作手册 pdf 1.8 MB Version: 7 2017/8/21

按文档类型

Software Download Service

You can download a product firmware that you have and the latest related software. (The product registration of this service is necessary to use this download service.)

驱动程序/软件下载 2019/12/4

MG3710A LabVIEW Driver

MG3710A LabVIEW Driver *To control MG3710A by remote program used LabView, please download the driver for both MG3710A and MG3700A.

驱动程序/软件下载 2.54 MB 2013/1/31

MG3700A LabVIEW Driver

MG3700A LabVIEW Driver *To control MG3710A by remote program used LabView, please download the driver for both MG3710A and MG3700A.

驱动程序/软件下载 3.8 MB 2012/9/20

按产品类别

未找到结果
Confirm your country below to see local events, contact information and special offers.