Skip to main content




Broadband Test Set Declaration of Conformity

This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00021

技术指标 pdf 107.8 KB Version: B 2020/7/29

Lightning 37xxxE Vector Network Analyzer Operation Manual

This manual provides general information, installation, and operating information for the Model 37xxxE Vector Network Analyzer (VNA) system. (Throughout this manual, the terms VNA, 37xxxE VNA, and 37xxxE will be used interchangeably to refer to the system.) This section provides general information about the 37xxxE VNA system and one or more precision-component calibration or performance verification kits. The section also provides a listing of recommended test equipment.

操作手册 pdf 6.3 MB Version: B 2011/8/24

Vector Network Analyzer 2300-480 Performance Verification Software User Guide

This manual supports the Anritsu 37000 Series VNA System Performance Verification Software, GPRG# 63420. This software is used with the Anritsu 37000 Series Vector Network Analyzers.

用户手册 pdf 697.0 KB Version: B 2011/7/19

Lightning 37xxxE Maintenance Manual

This manual provides general service and preventive maintenance information for the Anritsu 37xxxE Series models of Vector Network Analyzer (VNA) systems.

维护手册 pdf 4.8 MB Version: A 2011/1/31

Lightning 37xxxE GPIB Programming Manual

This manual provides IEEE 488 bus (GPIB) programming information and data for all models of the Series 37000E Vector Network Analyzer. It contains the entire command set for programming all features. Consequently, not all of the codes documented in this manual apply to all models within the series (372xxE, 373xxE).

编程手册 pdf 1.8 MB Version: A 2010/8/18

Lightning 37000E Series Technical Data Sheet & Configuration Guide

The Lightning E series microwave and millimeter-wave Vector Network Analyzers encompass a wide range of high performance component and system test tools designed to address the growing needs of defense, satellite, radar, broadband communication, and optoelectronic component markets. Complete measurements solutions to 20 GHz, 40 GHz and 65 GHz are available in microwave models 37x47E, 37x69E, and 37x97E, respectively.

技术指标 pdf 1.4 MB Version: A 2010/6/16

AutoCal 36581NNF/81KKF/82KKF User's Guide

User guide for the Automatic VNA Calibrators 36581NNF, 36581KKF, and 36582KKF. This manual describes (1) the physical requirements, including test hardware, software, and computer resources necessary to setup a measurement and (2) how to start and use the software to control the calibration.

用户手册 pdf 223.9 KB Version: E 2007/3/26


Lightning Navigator™ Multi-Port Software

Download Instructions — Click on Download — Run the executable file and it will guide you through the rest of the installation. Supported VNAs: Lightning 37000D/E series

驱动程序/软件下载 exe 19.0 MB Version: 5.17 2017/9/18

VNA FTP Utility Version 1.27

VNA FTP displays the VNA's Hard and Floppy drives alongside the PC's drives, similar to Windows Explorer. This permits moving, copying and deleting files within and between the two entities with a few mouse clicks. Download and Install Instructions: Download the file below and save it to your PC's hard drive. Unzip the file. Run the setup.exe file to begin the installation process.

驱动程序/软件下载 exe 4.3 MB Version: 1.27 2017/1/10

Cal Kit File Maker

The Cal Kit File Maker program provides all the files necessary to create a calibration kit file for the VectorStar, Lightning and ShockLine VNAs. The program provides a convenient set of menus for entering the required information for the different standards in the calibration kit. The program does not perform calculations, it takes the input provided and creates files in the appropriate format.

驱动程序/软件下载 zip 4.5 MB Version: 2.02 2016/4/26

Capture VNA version 2.45

Capture VNA is a Windows program to capture, display, save, and print the graphical and text data from Anritsu's VNAs. The displayed data can be loaded from a floppy disk where it was previously saved at the VNA or captured directly from the VNA over the GPIB port. The displayed data can be saved in a variety of formats (bitmap, S2p, text, etc.) to the PC's internal disk drive or a network drive and printed to a local or network printer (including color). The data can also be copied to the Windows Clipboard to be imported into other Windows programs such as MS Word, Excel, Power Point, Photo Editor, Paint or Notepad. Download and Install Instructions: Download the file below and save it to your PC's hard drive. Unzip the file. Run the setup.exe file to begin the installation process.

驱动程序/软件下载 zip 2.7 MB Version: v2.6.9 2014/1/14

Trace Manager version 1.30

This 16-bit Windows program captures and plots data traces from Anritsu VNAs. The data can be manipulated, archived and made available to other windows applications. Download and Install Instructions: Download the file below and save it to your PC's hard drive. Unzip the file. Run the setup.exe file to begin the installation process.

驱动程序/软件下载 zip 4.31 MB 2006/2/14

Lightning Command Encyclopedia (LCE)

The Lightning Command Encyclopedia (LCE) is a searchable, Windows-based, fully integrated command databse for the Lightning Vector Network Analyzer.  The LCE provides command mnemonic names, descriptions and usage information, and is searchable by mnemonic, description, query command, application and user comment.  It is designed to serve as a rapid development tool to simplity the creation of 37XXX series remote control applications.  It provides everything necessary to create GPIB programs. Download Instructions Click on Download Now Save the file in a temporary folder on your PC's hard drive Extract all the installation files from the downloaded zip file Execute the setup.exe file.  This will begin the install and walk you through the entire procedure Current Version:  2.03

驱动程序/软件下载 7.93 MB 2004/4/8