Skip to main content
Spectrum Monitor OEM Board MS27100A

频谱监测模块

MS27100A
概述

MS27100A 使得能够方便地识别和消除非法或未经核准的干扰信号。通过持续监控频谱,可在问题信号出现时就实时地识别它们。这款监控器还能够检测到各种模式的多余信号活动,从而提供高效的方式,以确定干扰来源的特征,并对其进行定位。

除了检测干扰,MS27100A 还可用于确定频谱占用的特征。政府监管机构和运营商通常希望确定各种频带的使用率。监控这些频率即可提供所需的信息以优化频谱,实现最大的利用率。可将频谱另用于其他应用,或通过认知无线电技术将其与其他信号结合而实现多路传输。

频率监控还可用于确保对政府法规的遵守。警方、消防员、空中交通管制部门、军队和紧急救助机构必须能够毫无障碍地与监控器准确通信。通常通过频谱监控来确保各方对频谱法规的遵守。

MS27100A 外形小巧,对于空间极为有限的机架结构,它正是理想之选。 MS27100A 还支持中频输出(140 MHz),以便用户进一步处理。

  • 9 kHz 至 6 GHz
  • 扫描速度高达 24 GHz/s
  • 集成网络服务器,可通过网页浏览器查看、控制和执行测量
  • 采用监视计时器,确保远程部署的监控器长期保持稳定性
  • 杂散水平低,可准确发现信号
  • 20 MHz 瞬时 FFT 带宽

PC based VSA software for use with IQ data captured from an Anritsu Spectrum Analyzer enabled with Option 128

MX280005A Vector Signal Analysis PC software for Anritsu analyzers with option 128 is for testing physical layer modulation quality of various transmission standards. It serves a wide variety of markets, from aerospace to public safety (TETRA) to satellite communications and commercial electronics (ZigBee, Wi-Fi).

During the design and manufacturing stages of a wireless communication system, it is common to measure the modulation quality with benchtop instruments. Using the IQ capture (optional on some analyzers) together with the MX280005A software these measurements can be validated in a field environment. In framed mode, the software decodes common wireless signals including public safety (TETRA, P25, and DMR) to aerospace and satellite communications. In unframed mode, the software analyzes continuous modulation such as DQPSK, QAM, ASK, and FSK. The Field Master Pro MS2090A supports IQ captures up to 110 MHz bandwidth meaning narrow band communications signals or wideband satellite downlink signals can be captured and analyzed with the same application. Note that framed mode is not supported on the MS2710XA series of spectrum monitors.

MX280005A software can initiate the capture of IQ data over an Ethernet connection or a data capture can be triggered manually. Multiple analysis formats are provided including signal spectrum, EVM, constellation diagrams, eye diagrams, and numeric result tables. A comprehensive insight into all aspects of the transmitter performance is provided as multiple results windows can be displayed simultaneously.

应用
  • 检测非法或未经核准的调幅/调频/手机广播
  • 敏感站点监控(国境、军事机构和核电站…)
  • 机场监控(监控通常与调频波段相邻的通信频率)
  • 监控监狱/拘留所,以捕捉非法广播
  • 主动列车控制 (PTC),确保列车通信渠道畅通
  • 有线电视,减少到外部环境和有线系统的泄漏
  • 政府监管机构执行频谱政策
选项

Hardware Options

Option Description
MS27100A-0706 9 kHz – 6 GHz Spectrum Monitor
MS27100A-0098 Standard Calibration to ISO17025 and ANSI/NCSL Z540-1. Includes calibration certificate
MS27100A-0099 Premium Calibration to ISO17025 and ANSI/NCSL Z540-1. Includes calibration certificate, test report, and uncertainty data

Vision Options

Option Description
MS27100A-0400 Vision Monitor Enabled
MS27100A-0401 Vision Locate Enabled (requires option 400)
MS27100A-0407 High-Speed Port Scanner
MS27100A-0479 AM/FM Demodulation
MS27100A-0482 Drone Detection and Tracking (requires options 400 and 401)
MS27100A-0485 Spectrum Occupancy (requires option 400)
MS27100A-0486 Coverage Mapping (requires option 407)
入门指南

通过以太网连接至远程频谱监控器

通过主板上的千兆以太网端口,实现与 MS27100A 之间的通信。提供多种选项,以便使用 DHCP 服务器动态获得 IP 地址,或用于设置静态的 IP 地址。本款主板发运时的默认静态 IP 地址为 10.0.0.2。通过笔记本电脑/台式电脑连接至主板后,IP 类型可通过监控器的集成网络服务器呈现的用户界面进行更改。

如果使用 DHCP,Anritsu 会提供以太网发现程序,该程序能够查询连接至您网络的所有设备。您可以从 Anritsu 网站上找到以太网发现程序。

部分用户可能愿意选用域名服务器 (DNS),在这种情况下,频谱监控器的主机名称可被解析成动态 IP 地址。您可通过 DNS 服务器创建主机名称。主机名称的示例为“mymonitor1.org”或“spectrum1.net”等。目前存在几个免费的 DNS 服务。比如,Anritsu 使用过 www.no-ip.com。您需要创建一个帐户,并为您的仪器选择主机名称。

您可以通过我们的“资料库”选项卡,下载《以太网配置快速入门指南》,以了解关于配置以太网连接的更多详细信息。

资料库
视频
Demonstration of FM Deviation Measurement Using Vision Software with the AM/FM Demodulation Option 479

Demonstration of FM Deviation Measurement Using Vision Software with the AM/FM Demodulation Option 479
Methods for setting the resolution

Using Vision Monitor Option 400 to Generate Automatic Alerts When Suspicious Signals Are Detected

Using Vision Monitor Option 400 to Generate Automatic Alerts When Suspicious Signals Are Detected
Generate email alerts

Demonstration for Using Markers with the Vision High-Speed Port Scanner

Demonstration for Using Markers with the Vision High-Speed Port Scanner
Option 407

POA and TDOA Measurements Demonstration Using Vision Software

POA and TDOA Measurements Demonstration Using Vision Software
Make geo-location measurements

AeroShield Demonstration – 2.4 and 5.8 GHz ISM Bands Monitored for Drone Activity

AeroShield Demonstration – 2.4 and 5.8 GHz ISM Bands Monitored for Drone Activity
Drone detection
Drone tracking
From 3 RSMs

AeroShield Demonstration Leveraging 4 Remote Spectrum Monitors

AeroShield Demonstration Leveraging 4 Remote Spectrum Monitors
Drone detection
Drone tracking
From 4 RSMs

Confirm your country below to see local events, contact information and special offers.