Calibration kits contain components used to identify and separate error sources inherent in microwave test setups. The kits described in this document contain all of the precision components and tools required to calibrate Vector Network Analyzer systems for error corrected measurement. P/N: 10410-00278
Quick Reference Guide
pdf 3.5 MB
Version: F
14/09/2021
This Reference Manual provides information about the VectorStar Broadband/Banded Millimeter-Wave Modules. These modules are used with the ME7838 Series VectorStar Broadband/Banded Millimeter-Wave VNA Systems. P/N: 10410-00311
Quick Reference Guide
pdf 7.9 MB
Version: H
14/09/2021
This manual provides general service and preventive maintenance information for the Vector Network Analyzers MS4640B models. The information includes replaceable parts information, performance verification tests, adjustment procedures, troubleshooting, theory of operation and block diagrams, and assembly/sub-assembly removal and replacement procedures. P/N: 10410-00320
Maintenance Manual
pdf 56.9 MB
Version: F
14/09/2021
This manual provides general service and maintenance instructions for the MN469xC Series Multiport Test Set. It contains procedures for testing the system for proper operation, verifying system performance in conjunction with a 2-port MS4640A or MS4640B VectorStar VNA. P/N: 10410-00730
Maintenance Manual
pdf 9.2 MB
Version: D
14/09/2021
This manual provides instructions for setup and initial test of the VectorStar ME7838A4 Multiport Broadband/Banded Millimeter Wave Vector Network Analyzer System. P/N: 10410-00734
Installation Guide
pdf 8.6 MB
Version: E
14/09/2021
Информация об изделиях
Brochure
pdf 1.6 MB
Version: 2020-05
06/08/2021
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
Catalog
pdf 12.6 MB
Version: AB
23/07/2021
This operation manual is to used as a guide for the proper installation and operation of the VectorStar MS4640B Series of Vector Network Analyzers. P/N: 10410-00317
Operations Manual
pdf 23.4 MB
Version: V
07/07/2021
The purpose of this Calibration and Measurement Guide is to introduce the basic calibration and operation of the VectorStar MS464xB Vector Network Analyzer (VNA) System and reduce the time required to become
proficient at performing basic measurements. The procedures in this manual assume a working knowledge of, and a familiarity with, vector network analyzers. P/N: 10410-00318
Measurement Guide
pdf 49.4 MB
Version: AB
07/07/2021
This manual provides a reference for the VectorStar Series VNA User Interface (UI) menus and dialog boxes. In addition, this manual provides the context-sensitive portion of the instrument Help system. P/N: 10410-00319
User Guide
pdf 66.7 MB
Version: AB
07/07/2021
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10410-00040 | OHS | version AB | 07/07/2021
Online Help System
html 213.5 KB
Version: AB
07/07/2021
This manual provides information for remote operation of the VectorStar MS4640B Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus, USB, and Ethernet. P/N: 10410-00322
Programming Manual
pdf 30.3 MB
Version: AB
07/07/2021
This guide provides warranty, safety and regulatory compliance information for the VectorStar Series VNA products. P/N: 10100-00063
Datasheet
pdf 2.0 MB
Version: L
06/07/2021
This document provides detailed specifications for the MS4640B series microwave Vector Network Analyzers (VNAs), including all related options, and accessories. P/N: 11410-00611
Datasheet
pdf 7.7 MB
Version: AH
06/07/2021
This poster features sections on Circuits and Waves, S-Parameters, Reflection Coefficient, Phase and Group Delay, Non Linear Transmission Lines, VNA Architecture, Superposition/True Mode Stimulus, Time Domain, Pulse Measurements, and a Reflection Coefficient Table. P/N: 11410-00934
Brochure
pdf 5.3 MB
Version: E
30/04/2021
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with Compass Technology hardware fixtures and CTG software systems, and make an ideal solution for material measurements. P/N: 11410-01182
Leaflet
pdf 854.6 KB
Version: B
11/03/2021
Anritsu’s ShockLine and VectorStar series vector network analyzers are now compatible with all the available solutions from Keycom Technologies for various types of material measurements methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and many more. P/N: 11410-01191
Leaflet
pdf 801.4 KB
Version: B
11/03/2021
Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800
Brochure
pdf 14.5 MB
Version: AB
09/03/2021
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with the SWISSto12 MCK systems, and are ideal for active and passive material measurements. P/N: 11410-01167
Leaflet
pdf 538.2 KB
Version: B
09/03/2021
The VectorStar vector network analyzer millimeter-wave (mmWave) VNA series offers a new performance benchmark for S-parameter measurements of RF, microwave, and mmWave devices. Anritsu now provides RF and Microwave engineers now have access to a powerful measurement tool for performance analysis of devices ranging from transistors in an on-wafer environment to communication systems in commercial or defense applications. P/N: 11410-00792
Brochure
pdf 14.4 MB
Version: M
17/02/2021
