The BTS Master MT8220T is Anritsu’s third generation high-performance handheld base station analyzer that has been specifically developed to advance the support for 4G wireless networks as well as installed 2G, 3G and WiMAX networks. The MT8220T provides 20 MHz bandwidth modulation quality for LTE eNodeB testing and is equipped with a high-contrast, touch screen display and backlit key panel making it simple to use in both bright sunlight and dim conditions.
The BTS Master MT8220T Base Station Analyzer is the essential multi-function instrument for senior wireless technicians and RF engineers to accurately and quickly verify the installation and commissioning of base stations for optimal wireless network performance and for the on-going maintenance and troubleshooting to keep wireless network infrastructure fine-tuned. A standard three-year warranty demonstrates world-class reliability and brings peace-of-mind to owning and using the MT8220T BTS Master.
The signal analyzers for 2G, 3G and 4G networks can test the RF quality and modulation quality of a wireless signal to verify the performance of virtually every subsystem in a base station's transmitter. With the downlink over-the-air (OTA) quality tests included with each signal analysis option you can test the performance of transmitters that are difficult to access like remote radio heads (RRH), troubleshoot coverage problems and for LTE and TD-LTE, check that the MIMO configuration is correctly working. Also, a CPRI/OBSAI RF measurements option allows the user to check for uplink interference problems by conveniently connecting into the CPRI/OBSAI fiber link.
The new, patented PIM over CPRI option is a non-intrusive method of measuring passive intermodulation (PIM) using live traffic over the Common Public Radio Interface (CPRI) link. It is set to change the dynamics of PIM detection by enabling users to test at ground level, any time of the day – with no site turn down required. By tapping into the CPRI data on the downlink and uplink between the remote radio head and baseband unit, the BTS Master MT8220T can calculate the PIM desensitization of the LTE uplink. In addition, the PIM over CPRI measurement option will also determine if the PIM found is internal or external to the antenna system, which is useful in deciding whether a tower crew needs to be called on site.
The BTS Master MT8220T is small, lightweight and battery operated making it easy for the technician to use it anywhere at a cell site. With less than 5 minute warm-up time you get more useful battery life and you can start making measurements sooner. A GPS receiver is a standard feature allowing convenient mapping and triangulation of problematic interference signals in conjunction with Anritsu's interference hunting solutions.
When it comes to meeting key performance indicators (KPI) such as dropped calls, call denial or call blocking rates owing to a malfunction at the cell site or interference, the BTS Master MT8220T is the all-in-one instrument that you can count on for quick problem resolution. For network operators, sub-contractors and installers it is the only fully integrated, touch screen hand held tool which combines line sweeping, comprehensive signal analysis with MIMO testing, ultra-sensitive spectrum analysis and sophisticated interference tracking in a compact, easy-to-use instrument.
Standard Functionality and Specifications
Cable and Antenna Analyzer
- 400 MHz to 6 GHz
- Measurements: RL, VSWR, Cable Loss, DTF, Phase (1- and 2-port), Gain
- 2-port gain measurement uncertainty: < 0.45 dB
- 2-port dynamic range: > 100 dB, typical 110 dB (400 MHz to 2800 MHz)
- RF immunity: +17 dBm on-channel, +10 dBm on-frequency
- Calibration: OSL and FlexCal™
- 150 kHz to 7.1 GHz
- Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Field Strength, Spectral Emissions
- Dynamic range: > 95 dB in 1 Hz RBW
- DANL: –163 dBm in 1 Hz RBW
- Phase noise: –100 dBc/Hz @ 10 kHz offset
- Frequency accuracy: ± 25 ppb with GPS On
- Fast, Performance, No FFT and Burst Detect™ sweep modes
- With 2000-1760-R Antenna
Line Sweep Tools (LST)
Anritsu Line Sweep Tools (LST) is the latest generation of Handheld Software Tools, an industry standard. This PC based post-processing software efficiently manipulates line sweep and PIM traces for reporting purposes.
easyTest Tools (eTT)
easyTest Tools allows users to Create work instruction files on their PC, Deliver these files by e-mail, and then Display work instructions on supported instruments and modes. These easyTest™ files provide step-by-step instructions for both the test setup and instrument operation.
easyMap Tools (EMT)
easyMap Tools provides maps in formats that Anritsu's handheld spectrum analyzers can use for either coverage mapping or interference hunting. It helps users find and prepare geo-referenced maps and building floor plans for use by Anritsu handheld Spectrum Analyzers.
Wireless Remote Tools
Wireless Remote Tools™ is Anritsu's remote control software, available as a free download. It works with many of our Handheld RF Instruments. The Wireless Remote Tools software allows users to wirelessly monitor and control a wide range of Anritsu handheld RF instruments. Wireless Remote Tools provides a solution for the times when it is not practical to be close to the instrument.
Master Software Tools (MST)
Master Software Tools (MST) allows Anritsu handheld Spectrum Analyzer users to Capture, Analyze, and Document traces and measurements taken with a wide variety of Anritsu handheld spectrum analyzers.