Skip to main content

Центр загрузок

Поиск по номеру модели продукта

По типу документа

5G Solutions Catalog 2019 Vol. 2

Introduces Anritsu 5G solutions and products. Anritsu will contribute to customer's 5G product development and future innovation of network.

Brochure pdf 3.1 MB 17/07/2019

Anritsu Signal Analyzers/Spectrum Analyzers

Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers, ranging from high-performance and multi-function, high-end models for R&D to handheld types for field use.

Selection Guide pdf 2.9 MB 28/06/2019

Signal Analyzer MS2690A/MS2691A/MS2692A

The Signal Analyzer MS2690A/MS2691A/MS2692A (MS269xA) has the excellent general level accuracy, dynamic range and performance of a high-end spectrum analyzer.

Brochure pdf 6.1 MB 17/04/2019

MX269017A Vector Modulation Analysis Software Operation Manual Remote Control

This application can be controlled from an external controller (PC) by remote control commands using the MS269x Series, MS2830A or MS2840A Signal Analyzer. The remote control commands are defined by the SCPI format.

Operations Manual pdf 1.7 MB Version: 25 27/03/2019

MX269017A Vector Modulation Analysis Software Operation Manual Operation

The MX269017A Vector Modulation Analysis software is a software option for performing modulation analysis of modulated signals.

Operations Manual pdf 7.5 MB Version: 32 27/03/2019

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual Signal Analyzer Function Operation

The MS2690A/MS2691A/MS2692A Signal Analyzer can measure the transmitter characteristics of wireless devices for various types of mobile communications quickly, accurately, and easily. The Signal Analyzer function can achieve high-speed spectrum analysis and simultaneous analysis on the frequency and time axes, which cannot be achieved by a conventional sweep type spectrum analyzer, by using FFT processing (fast Fourier transformation). Also, it can record the RF input signal as digital data (digitize function).

Operations Manual pdf 13.4 MB Version: 33 07/03/2019

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual Spectrum Analyzer Function Operation

The MS2690A/MS2691A/MS2692A Signal Analyzer is a device used for the quick, highly accurate, and simple measurement of the transmission characteristics of various wireless devices and systems.
The spectrum analyzer function enables full-span analysis of a broad spectrum, which is a characteristic of conventional sweep type spectrum analyzers, and realizes quick and highly accurate signal processing through the use of a digital IF block. These features make the Spectrum Analyzer function ideal for various applications ranging from R&D to manufacturing.

Operations Manual pdf 7.6 MB Version: 43 07/03/2019

MX285051A-011/MX269051A-011 NR TDD sub-6GHz Downlink MX285051A-021 NR TDD mmWave Downlink MX285051A-061/MX269051A-061 NR TDD sub-6GHz Uplink MX285051A-071 NR TDD mmWave Uplink Operation Manual Operation

The MS2850A or MS269xA Signal Analyzer enables high-speed,high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
The MX285051A-011/MX269051A-011 NR TDD sub-6GHz Downlink,MX285051A-021 NR TDD mmWave Downlink,MX285051A-061/MX269051A-061 NR TDD sub-6GHz Uplink,and MX285051A-071 NR TDD mmWave Uplink (hereinafter, referred to as “MX285051A-011/021/061/071 and MX269051A-011/061”) are software options for measuring RF characteristics according to 5G NR Standard defined by 3GPP.

Operations Manual pdf 2.5 MB Version: 5 07/03/2019

MX285051A-011/MX269051A-011 NR TDD sub-6GHz Downlink MX285051A-021 NR TDD mmWave Downlink MX285051A-061/MX269051A-061 NR TDD sub-6GHz Uplink MX285051A-071 NR TDD mmWave Uplink Operation Manual Remote Control

This application can be controlled from an external controller (PC) by remote control commands using the MS2850A or MS269xA Signal Analyzer (hereafter referred to as “this instrument”). Remote control commands for this application are in the SCPI format defined by the SCPI Consortium.

Operations Manual pdf 1.9 MB Version: 5 07/03/2019

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual Mainframe Operation

The MS2690A/MS2691A/MS2692A Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of radio devices for various mobile communications types.
The MS2690A/MS2691A/MS2692A enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. In addition, the FFT process (high-speed Fourier conversion) realizes high-speed spectrum analysis and simultaneous analysis on frequency and time axes not possible with conventional sweep-type spectrum analyzers. It also records RF input signals as digital data (digitize function). It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.

Operations Manual pdf 9.7 MB Version: 48 07/03/2019

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual Signal Analyzer Function Remote Control

Automatic measurement can be performed by using this instrument in connection with an external controller (PC). This instrument is standardly equipped with GPIB, Ethernet, and USB interfaces. You can also select a remote control command from the SCPI mode, which is a command format defined by the SCPI Consortium, and Native mode, which is our unique format. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for how to switch the language mode. You can use the Native mode by converting SCPI commands into Native ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A Signal Analyzer Operation Manual (Mainframe Remote Control) for details. To use the Signal Analyzer function on the MS2830A or MS2840A, Analysis Bandwidth 10 MHz Option or greater is required.

Operations Manual pdf 2.4 MB Version: 36 07/03/2019

MX269028A WLAN (802.11) Measurement Software Operation Manual Remote Control

This application can be controlled from an external controller (PC) by remote control commands using the MS269x Series and MS2830A Signal Analyzer (hereafter referred to as “this instrument”). The remote control commands are defined by the SCPI format.

Operations Manual pdf 1.5 MB Version: 4 07/03/2019

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual Noise Figure Measurement Function Operation

The MS2690/MS2691/MS2692A or MS2830A/MS2840A/MS2850A Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various types of mobile communications.

Operations Manual pdf 2.3 MB Version: 9 07/03/2019

MX269xxxA series Software - Waveform Pattern MX2690xxA / IQproducer MX2699xxA

MS269xA Signal Analyzer and MS2830A Signal Analyzer supports a built-in Vector Signal Generator. The addition of the MS269xA-020 or MS2830A-020/021, Vector Signal Generator option to the MS269xA or MS2830A Signal Analyzer creates a powerful one-box tester that can be configured to support various communication technologies.

Brochure pdf 3.0 MB 06/03/2019

MX370113A/MX269913A 5G NR TDD sub-6GHz IQproducer Operation Manual

The MG3710A is a vector signal generator that includes an arbitrary waveform generator. It can be used for a wide range of applications, from R&D to manufacturing of digital mobile communication systems, devices, and equipment.
The MG3710A has the following features, and one MG3710A can address from the current major mobile communications to the next-generation mobile communications.

Operations Manual pdf 2.0 MB Version: 2 06/03/2019

Measurement Software MX2690xxA series / MX2830xxA series / MX2850xxA series

This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.

Brochure pdf 6.2 MB 06/03/2019

5G NR TDD sub-6GHz IQproducer MX370113A / MX269913A

5G NR TDD sub-6GHz IQproducer is PC application software for vector signal generation to generate Uplink and Downlink patterns supporting the sub-6 GHz standard in the 3GPP 5G NR FR1 specifications. This product Introduction for the 5G NR TDD sub-6GHz IQproducer describes the feature of IQproducer, the introduction of models which can be installed the IQproducer, and example of usage of utilizing with feature of models.

Product Introduction pdf 974.3 KB 27/11/2018

MX285051A/MX269051A 5G Standard Measurement Software (Base License) Operation Manual

The MS2850A or MS269xA Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various mobile communications types. The MS2850A or MS269xA is equipped with high-performance signal analyzer and spectrum analyzer functions as standard, with optional measurement software allowing modulation analysis functionality supporting various digital modulation modes.
The MX285051A/MX269051A 5G Standard Measurement Software (Base License) (hereinafter, referred to as “MX285051A/MX269051A”) allows measuring RF characteristics according to 5G standard by installing the software options such as MX285051A-001 Pre-Standard CP-OFDM Downlink.

Operations Manual pdf 1.2 MB Version: 3 05/11/2018

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A Signal Analyzer Vector Signal Generator Operation Manual IQproducerTM

This operation manual describes the functions of the IQproducerTM, except for the signal generation application.

Operations Manual pdf 4.5 MB Version: 11 05/11/2018

Signal Analyzer and Signal Generator Security Policy

This document explains the latest safety measures and procedures described in the instruction manual that customers should implement to secure Anritsu signal analyzers and signal generators running Windows against malware. It also explains relevant instrument types and configurations.

Leaflet pdf 660.5 KB 14/09/2018

По типу документа

MS269xA Software

Measurement software for MS269xA series (login, password is required.)

Drivers, Software Downloads 22/04/2019

MS269xA-020 IQproducer

PC software to create waveform pattern for MS269xA-020 optional vector signal generator (login, password is required.)

Drivers, Software Downloads 02/12/2013

MS2690 LabVIEW Driver Version 4.06.0

MS2690 LabVIEW Driver Version 4.06.0

Drivers, Software Downloads 39.7 MB 01/07/2011

MS2690 CVI Driver Version 3.2.0

MS2690 CVI Driver Version 3.2.0

Drivers, Software Downloads zip 4.8 MB 25/11/2008

По категории продуктов

Записи не найдены
Confirm your country below to see local events, contact information and special offers.