Skip to main content

Центр загрузок

Поиск по номеру модели продукта

По типу документа

Power Meters, Power Sensors, and Power Analyzer Product Information, Compliance, and Safety

This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu Power Meters, Power Master™, USB Power Sensors, Thermal Sensors, and Diode Sensors. Be sure to read these important notices before operating the equipment. P/N: 10100-00066

Datasheet pdf 1.3 MB Version: C 27/09/2019

Power Meters and Power Sensors Technical Data Sheet

The ML2490A series has the performance required for narrow, fast rising-edge pulse power measurements (for example, radar), while the ML2480B series is suited for wideband power measurements on signals such as W-CDMA, WiMAX, LTE, and WLAN. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package. P/N: 11410-00423

Datasheet pdf 2.0 MB Version: L 30/01/2019

ML248xB / ML249xA Wideband Peak Power Meter Operation Manual

This manual provides set-up and operational information for the ML2487B / ML2488B and ML2495A / ML2496A Peak Power Meters.

Operations Manual pdf 2.5 MB Version: N 10/11/2017

PowerMax (MX249001A) Ethernet Software for use with the ML248xB and ML249xA Power Meter

This manual provides an overview to the PowerMax software (MX249001A) for use with the ML248xB and ML249xA power meters. No prior knowledge of PowerMax is assumed, although a familiarity with the purpose and operation of the ML248xB and ML249xA models is required.

User Guide pdf 1.4 MB Version: C 10/11/2017

Wideband Peak Power Meter ML248xA/8xB/9xA Maintenance Manual

This manual provides general information, performance verification, calibration, theory, and service information for the Anritsu Power Meters (ML2487/8A, ML2487/8B and ML2495/6A).

Maintenance Manual pdf 3.0 MB Version: K 11/02/2015

Power Meters ML243xA, ML248xA/B and ML249xA Firmware Upgrade Guide

This user guide provides instructions on how to install firmware updates on the ML2400 Series Power Meters using the Anritsu Bootloader Software Utility. Requirements Anritsu bootloader software utility Bootloader cable (Anritsu part number B41323 – a 9 pin female to 9 pin female RS-232 cable, with TX & RX swapped, CTS & RTS swapped, and DTR & DSR swapped) Anritsu ML2400 series power meter (ML2437A, ML2438A, ML2487A/B, ML2488A/B, ML2495A, or ML2496A) The associated new firmware files Intel-based PC with a Pentium or equivalent processor and the Microsoft® Windows® 2000, Windows XP, or the Windows 7 operating system (32- or 64-bit) Note Both the Anritsu Bootloader software utility and power meter firmware can be downloaded from www.anritsu.com. These files will be under the Library tab on the associated product page under the Drivers, Software Downloads heading.

User Guide pdf 984.6 KB Version: A 07/08/2014

Wideband Peak Power Meter ML248xB/ML249xA Remote Programming Manual

This manual provides detailed information of the GPIB mnemonics for the ML2487B / ML2488B and ML2495A / ML2496A Peak Power Meters. Explanations in this manual apply equally to all units mentioned above unless otherwise stated.

Programming Manual pdf 2.5 MB Version: J 03/10/2012

По типу документа

Anritsu Power Meter Bootloader Software Application

The Anritsu power meter bootloader software application enables users to upload firmware to the Anritsu ML2430A, ML2480A/B, and ML2490A Series power meters. It is for use on an Intel-based PC with Pentium processor or equivalent and Microsoft® Windows® 2000, Windows XP, or Windows 7 operating systems (32- or 64-bit). Release History

Drivers, Software Downloads zip 29.2 MB Version: 1.00 01/08/2014

ML248xB and ML249xA Firmware version 2.35

Anritsu maintains a policy of continuous development and enhancement of instrument software. Software version 2.35 is for the ML2487B, ML2488B, ML2495A and the ML2496A Power meters.

Drivers, Software Downloads zip 765.9 KB Version: 2.35 15/07/2011

PowerMax Remote User Interface

A remote user interface for standard PCs. PowerMax can configure the ML2490A and ML2480B series Power Meter and display results and traces in a large format on the PC. Key features include Controls ML2490A and ML2480B series power meters from standard Ethernet interface on a PC Large representation of power meter screen on PC display Simultaneous display of measurement results for up to 8 gates Simultaneous display of up to 4 marker readings Simple configuration tabs for instrument control Save results images and traces (raw data) to file on a PC Save and recall Instrument settings from PC

Drivers, Software Downloads zip 29.26 MB 16/09/2008

Measurement Uncertainty Calculator

Calculates the uncertainty of a power measurement when using Anritsu's ML2430A, ML2480B and ML2490A series power meters and MA244xD, MA247xD, MA248xD, MA249xA, MA2411B and MA2400xA power sensors. This is a form of software featured in a spreadsheet format.

Drivers, Software Downloads 333 KB 24/04/2008

По категории продуктов

Записи не найдены
Confirm your country below to see local events, contact information and special offers.