This guide provides warranty, safety and regulatory compliance information for the VectorStar Series VNA products. P/N: 10100-00063
Datasheet
pdf 2.0 MB
Version: J
08/12/2020
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
Catalog
pdf 13.3 MB
Version: AA
01/09/2020
Anritsu has teamed with Diamond Engineering and Diamond Microwave Chambers to create a robust anechoic chamber solution for conducting various antenna measurements.
Leaflet
pdf 1.9 MB
Version: A
26/08/2020
Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800
Brochure
pdf 17.9 MB
Version: AA
25/08/2020
In 1965, Anritsu filed the patent that defined the first modern Vector Network Analyzer (VNA).
We are proud to continue that tradition of innovation to the present day—with the world’s first portfolio of VNAs that bring Nonlinear Transmission Line (NLTL) technology to every measurement scenario from on-wafer device characterization to R&D testing to manufacturing and field operations. P/N: 11410-00905
Brochure
pdf 12.7 MB
Version: K
04/08/2020
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with the SWISSto12 MCK systems, and are ideal for active and passive material measurements. P/N: 11410-01167
Leaflet
pdf 532.8 KB
Version: A
28/05/2020
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with Compass Technology hardware fixtures and CTG software systems, and make an ideal solution for material measurements. P/N: 11410-01182
Leaflet
pdf 851.0 KB
Version: A
28/05/2020
Anritsu’s ShockLine and VectorStar series vector network analyzers are now compatible with all the available solutions from Keycom Technologies for various types of material measurements methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and many more. P/N: 11410-01191
Leaflet
pdf 741.1 KB
Version: A
28/05/2020
This application note will examine the issues component and device manufacturers and their engineers will face when designing their solutions in higher frequencies. P/N: 11410-01190
Application Note
pdf 3.9 MB
Version: A
26/05/2020
This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-00593
Datasheet
pdf 7.0 MB
Version: T
10/03/2020
High Performance, Broadband Network Analysis Solutions, ME7838D Series Microwave Vector Network Analyzers Technical Data Sheet. P/N: 11410-00778
Datasheet
pdf 5.7 MB
Version: M
10/03/2020
Through the use of a novel coaxial-mode interface connector and advanced transceivers, broadband frequency coverage beyond 220 GHz is now possible. The ME7838G allows a continuous, broadband frequency sweep from 70 kHz to 220 GHz without the need to concatenate multiple systems (operational from 40 kHz to 226 GHz). P/N: 11410-01060
Datasheet
pdf 5.4 MB
Version: C
10/03/2020
This technical data sheet provides technical specifications for the VectorStar ME7838E Series Multiport Broadband Vector Network Analyzers. P/N: 11410-00767
Datasheet
pdf 7.7 MB
Version: M
10/03/2020
This application note describes how to bias an active device up to 220 GHz using a Kelvin bias tee with the Anritsu VectorStar ME7838x broadband system. P/N: 11410-01168
Application Note
pdf 1.6 MB
Version: A
12/02/2020
This poster features sections on Circuits and Waves, S-Parameters, Reflection Coefficient, Phase and Group Delay, Non Linear Transmission Lines, VNA Architecture, Superposition/True Mode Stimulus, Time Domain, Pulse Measurements, and a Reflection Coefficient Table. P/N: 11410-00934
Brochure
pdf 13.4 MB
Version: D
29/01/2020
This manual provides instructions for setup and initial test of the VectorStar ME7838 Series Broadband/Banded Millimeter-Wave Vector Network Analyzer (VNA) System. The ME7838 Series consists of the ME7838A, ME7838D, ME7838E, and ME7838G system models. P/N: 10410-00293
Installation Guide
pdf 8.5 MB
Version: H
28/01/2020
This manual provides general service and maintenance instructions for Anritsu ME7838 Series Broadband/Millimeter-Wave (BB/mm-Wave) Vector Network Analyzer System. P/N: 10410-00306
Maintenance Manual
pdf 6.4 MB
Version: F
28/01/2020
This manual provides description and maintenance instructions for the Model 3659 0.8 mm Calibration and Verification Kit and describes the use of the Anritsu 2300-580-R Performance Verification Software (PVS) for
the VectorStar ME7838 series Modular BB/mm-Wave VNA Measurement System. P/N: 10410-00327
User Guide
pdf 10.4 MB
Version: D
28/01/2020
This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00065
Datasheet
pdf 107.3 KB
Version: B
28/01/2020
The VectorStar ME7838G is a broadband system providing coverage to 220 GHz. Performing power calibrations across the entire sweep range will require multiple sensors and multiple adapters. After the power calibration and de-embedding of the adapters, the reference plane needs to be positioned at the tip of the probe for optimum performance. Relocation of the reference plane requires embedding of the probe using the .s2p file. This application note describes how to update the .s2p file of the probe as wear of the probe becomes a concern. P/N: 11410-01163
Application Note
pdf 484.4 KB
Version: A
28/01/2020