The High Performance Waveguide Mixer MA2806A/MA2808A are used with the MS2830A (26.5/42 GHz configuration) and the MS2840A (44.5 GHz configuration) for development and manufacturing of various types of millimeter-wave equipment, such as automotive radar (77/79 GHz), wireless backhaul (50 to 80 GHz), and gigabit wireless LAN (IEEE 802.11ad/WiGig, 60 GHz), etc..
리플렛
pdf 645.0 KB
2022/12/20
Product Introduction for 26.5 GHz Signal Analyzer MS2830A-044, 43 GHz Signal Analyzer MS2830A-045, High Performance Waveguide Mixer MA2808A and External Mixer MA2740C/MA2750C Series.
제품의 소개
pdf 4.7 MB
2022/06/16
Application Note for the Millimeter-wave Measurement
application note
pdf 757.5 KB
2022/06/16
Configuration Guide for the MS2830A Signal Analyzer
설정 가이드
pdf 606.9 KB
2022/05/18
The Signal Analyzer MS2830A-044/045 includes a spectrum analyzer function with upper frequency limits of 26.5 GHz and 43 GHz.
Combining it with the External Mixer MA2740C/MA2750C series supports measurements up to 325 GHz. Additionally, the excellent dynamic range and wide measurement span required for measuring wireless backhaul and automotive radar are supported by the High Performance Waveguide Mixer MA2808A (60 to 90 GHz). It supports measurements of Tx characteristics, including adjacent channel leakage power, spectrum mask, and frequency counts, as well as spurious measurements.
팜플렛
pdf 4.2 MB
2022/05/18
This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.
팜플렛
pdf 5.9 MB
2022/05/18
This leaflet introduces our high performances testers for automotive markets and let our targets know Anritsu’s total automotive lineup at a glance. Easy QR codes linking to product websites to get more detail information.
리플렛
pdf 5.5 MB
2022/04/25
The MS2830A Signal Analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The MS2830A enables high-speed and high-accuracy signal processing of
wide-ranging analyses at full-span, a characteristic of conventional
sweep-type spectrum analyzers, using a digital IF block. In addition, the
FFT process (high-speed Fourier conversion) realizes high-speed
spectrum analysis and simultaneous analysis on frequency and time axes
not possible with conventional sweep-type spectrum analyzers. Also,
added option enables recording of the RF input signal as digital data
(digitize function). It can be used in a variety of applications from
research and development to manufacturing thanks to its characteristics.
조작 메뉴얼
pdf 9.6 MB
Version: 43
2021/05/13
This guide explains the simple procedure for installing firmware in the Signal Analyzer
MS2830A, MS2840A, MS2850A, MS2690A, MS2691A and MS2692A.
유저 가이드
pdf 576.7 KB
2020/04/13
We take measures to protect Anritsu instruments that run Windows operating systems from computer viruses. This white paper provides ways of protecting your instrument from computer viruses.
화이트 페이퍼
pdf 608.5 KB
2019/12/26
The MS2830A/MS2840A/MS2850A Signal Analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The spectrum analyzer function enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.
조작 메뉴얼
pdf 11.0 MB
Version: 40
2019/11/14
The MX269022A LTE TDD Downlink Measurement Software is a software option for measuring the RF characteristics of LTE TDD (Frame structure type 2) downlink signal specified by 3GPP, TS36.211 V8.6.0 (2009-03) Physical Channels and Modulation (Release 8).
조작 메뉴얼
pdf 2.3 MB
Version: 21
2019/11/14
This application can be controlled from an external controller (PC) by
remote control commands using the MS2690A/MS2691A/MS2692A or
MS2830A/MS2850A Signal Analyzer. Remote control commands for this application
are in the SCPI format defined by the SCPI Consortium.
조작 메뉴얼
pdf 2.1 MB
Version: 18
2019/11/14
Automatic measurement can be performed by using this instrument in connection with an external controller (PC). This instrument is standard equipped with GPIB, Ethernet, and USB interfaces. You can also select a remote control command from the SCPI mode, which is a command format defined by the SCPI Consortium, and Native mode, which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for how to switch the language mode.
You can use the Native mode by converting SCPI commands into Native ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for details.
조작 메뉴얼
pdf 4.6 MB
Version: 57
2019/11/14
This Application Note explains issues in millimeter wave band measurements, and a new measurement method proposed by Anritsu.
application note
pdf 2.0 MB
2019/08/27
Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers. Ranging from high-performance and multi-function, high-end models for R&D to handheld models for field use.
선택 가이드
pdf 2.9 MB
Version: e1900
2019/06/28
The MX269017A Vector Modulation Analysis software is a software
option for performing modulation analysis of modulated signals.
조작 메뉴얼
pdf 7.5 MB
Version: 32
2019/03/27
This application can be controlled from an external controller (PC) by remote control commands using the MS269x Series, MS2830A or MS2840A Signal Analyzer. The remote control commands are defined by
the SCPI format.
조작 메뉴얼
pdf 1.7 MB
Version: 25
2019/03/27
Leaflet of effective MS2830A functions targeting for Land Mobile Radio (LMR).
리플렛
pdf 925.5 KB
2019/03/26
Automatic measurement can be performed by using this instrument in
connection with an external controller (PC). This instrument is
standardly equipped with GPIB, Ethernet, and USB interfaces. You can
also select a remote control command from the SCPI mode, which is a
command format defined by the SCPI Consortium, and Native mode,
which is our unique format.
See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal
Analyzer Operation Manual (Mainframe Remote Control) for how to
switch the language mode.
You can use the Native mode by converting SCPI commands into Native
ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A
Signal Analyzer Operation Manual (Mainframe Remote Control) for
details.
To use the Signal Analyzer function on the MS2830A or MS2840A,
Analysis Bandwidth 10 MHz Option or greater is required.
조작 메뉴얼
pdf 2.4 MB
Version: 36
2019/03/07
