Control Packages for Marvell Devices
In partnership with Marvell, Anritsu has developed control packages that provide a fully automated test solution for the devices listed below. Each control package uses a DLL containing commands that enable CombiTest to configure the chipsets from within a test plan. These commands are sent to the device via a host processor interface. When the test plan is executed, both the MT8860B/C and device are simultaneously controlled, allowing the test plan to proceed to completion in a fully automated manner.
| Device Type |
Marvell Control Software |
Supported Functionality |
| WLAN Standard |
Calibration |
Validation |
EEPROM Update |
| 88W8686 SDIO |
LAB Tool 1.4.1.0 |
802.11 b/g |
Y |
Y |
Y
|
| 88W8686 UART |
Lab Tool 1.2.9.0 |
802.11 b/g |
Y |
Y |
Y |
| 88W8688 SDIO |
Lab Tool 1.0.12.0 |
802.11 a/b/g |
Y |
Y |
Y |
| 88W8688 UART |
Lab Tool 1.2.9.0 |
802.11 a/b/g |
Y |
Y |
Y |
| 88W8786 SDIO |
Lab Tool 1.0.1 |
802.11 b/g/n |
Y |
Y |
Y |
| 88W8786 USB |
Lab Tool 1.0.1 |
802.11 b/g/n |
Y |
Y |
Y |
Note: Marvell Control Software not supplied by Anritsu
To obtain any of the control packages listed, or to enquire about control package support for other Marvell devices, please send an email to wlan.support@anritsu.com
