Skip to main content
MENU

다운로드 센터

제품 모델 번호별 검색

By Document Type

ShockLine MS4652xB Series VNA Maintenance Manual

This manual provides service and maintenance information for the Anritsu ShockLine MS4652xB Series Vector Network Analyzer. The information includes product description, performance verification procedures, parts removal and replacement procedures, and troubleshooting information. P/N: 10410-00765

보수 메뉴얼 pdf 9.6 MB Version: D 2019/07/17

5G Solutions Catalog 2019 Vol. 2

Introduces Anritsu 5G solutions and products. Anritsu will contribute to customer's 5G product development and future innovation of network.

팜플렛 pdf 3.1 MB 2019/07/17

Anritsu's RF and Microwave Test and Measurement Solutions Product Brochure

Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800

팜플렛 pdf 18.2 MB Version: L 2019/07/09

ShockLine MS46522B and MS46524B Series Operation Manual

Operation manual for the MS46522B and the MS46524B vector network analyzers. P/N: 10410-00743

조작 메뉴얼 pdf 9.7 MB Version: M 2019/06/28

ShockLine MS46522B and MS46524B Calibration and Measurement Guide

The purpose of this Measurement Guide is to introduce the basic calibration and operation of the ShockLine MS46522B and MS46524B Series Vector Network Analyzer (VNA) Systems and reduce the time required to become proficient at performing basic measurements. P/N: 10410-00753

측정 가이드 pdf 29.6 MB Version: M 2019/06/28

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

카탈로그 pdf 12.3 MB Version: T 2019/06/05

ShockLine VNA MS46522B Technical Data Sheet

The MS46522B is a series of 2-port Performance ShockLine Vector Network Analyzers. Delivering an unprecedented level of value and performance, including best-in-class dynamic range, the MS46522B series lowers cost-of-test and speeds time to market in numerous test applications up to 43.5 GHz. These applications include characterizing and manufacturing mobile network equipment, mobile devices, automotive cables, high-speed data interconnects and system integration components. P/N: 11410-00858

Datasheet pdf 4.8 MB Version: W 2019/06/04

MS46522B 2-port Performance ShockLine Quick Fact Sheet

The MS46522B is a series of 2-port Performance ShockLine Vector Network Analyzers. Delivering an unprecedented level of value and performance, including best-in-class dynamic range, the Performance series lowers cost-of-test and speeds time to market in numerous testing of applications up to 8.5 GHz. P/N: 11410-00862

팜플렛 pdf 813.7 KB Version: F 2019/06/04

ShockLine Vector Network Analyzer Family Product Brochure

The ShockLine family of vector network analyzers (VNAs) achieve a new level of capability, flexibility, and value for RF and microwave network analysis applications. ShockLine VNAs deliver excellent performance for measurements from 50 kHz up to 43.5 GHz and banded E-band measurements from 55 GHz to 92 GHz. These instruments are ideal for testing passive and many active components with general purpose VNA requirements. P/N: 11410-01071

팜플렛 pdf 2.2 MB Version: H 2019/06/04

ShockLine MS46xxxA/B and MS4652xB VNA Programming Manual

ShockLine VNAs supports remote operations commanded via the TCP/IP or VXI-11 protocols. This manual provides operation and programming information for this activity. P/N: 10410-00746

프로그래밍 메뉴얼 pdf 16.8 MB Version: R 2019/05/07

ShockLine Vector Network Analyzers Selection Guide

Anritsu's ShockLine Family of Vector Network Analyzers are a series of five VNA models (with 15 products to choose from) that provide a broad range of solutions to meet your unique performance, application, and budget needs. P/N: 11410-01039

선택 가이드 pdf 2.1 MB Version: D 2019/05/07

Vector Network Analysis Product Portfolio

In 1965, Anritsu filed the patent that defined the first modern Vector Network Analyzer (VNA). We are proud to continue that tradition of innovation to the present day—with the world’s first portfolio of VNAs that bring Nonlinear Transmission Line (NLTL) technology to every measurement scenario from on-wafer device characterization to R&D testing to manufacturing and field operations. P/N: 11410-00905

팜플렛 pdf 7.3 MB Version: E 2019/05/07

ShockLine Performance VNA MS46522B Option 83 Quick Fact Sheet

Option 83 is the five meter E-band frequency option for the 2-port MS46522B. It brings a unique banded mmWave measurement solution to the marketplace for OTA chamber applications. For measurements requiring E-band frequency coverage over distance, the new 522B series five-meter option 83 is the most convenient and best value on the market.

팜플렛 pdf 905.7 KB Version: A 2019/05/07

ShockLine MS46522B/524B User Interface Reference Manual

This manual is a reference document for the ShockLine VNA user interface (UI) menus and dialog boxes. P/N: 10410-00744

유저 가이드 pdf 42.6 MB Version: P 2019/04/09

ShockLine Series Vector Network Analyzers Verification Kits and Performance Verification Software

This quick start guide provides a brief overview of the installation and use of ShockLine Verification Kits and the 3-2300-610 Performance Verification Software (PVS) with ShockLine Series VNAs. P/N: 10410-00766

퀵 스타트 가이드 pdf 2.8 MB Version: B 2019/04/09

ShockLine MS46522B-082 E-band Frequency Option Quick Fact Sheet

Option 82 is the E-band frequency option for the 2-port MS46522B. It brings banded mm-wave measurement capabilities to an economic cost level unprecedented in the marketplace. P/N: 11410-00901

팜플렛 pdf 869.8 KB Version: D 2019/03/26

Distinction Between TRL and LRL

Although the TRL family of calibration algorithms have been around for over 40 years, there are still questions sometimes regarding differences between the family members. This is partially due to differences in various implementations over the years. The purpose of this document is to discuss some of the differences in the context of vector network analyzers (VNAs). P/N: 11410-01124

application note pdf 271.3 KB Version: A 2019/03/26

Technique for Improving Low Insertion Loss VNA Measurements Application Note

Vector network analyzers (VNAs) are used to measure the performance of a wide variety of passive and active RF and microwave devices. Passive devices can be less demanding to test than active devices, thus requiring less performance from the VNA. However, one interesting exception to this is the measurement of very low insertion loss passive components such as precision adapters or airlines. These types of devices can present a difficult challenge to characterize because of the desire for very low uncertainties on these small insertion losses. This application note talks about these challenges and provides a helpful technique. P/N: 11410-01090

application note pdf 975.1 KB Version: A 2018/09/25

Superposition vs. True-Balanced: What's Required for your Signal Integrity Application White Paper

The superposition technique relies on the inherent linear nature of a transmission line, and mathematically derives the differential and common-mode transmission line characteristics through superposition while stimulating just one side of the balanced transmission line at a time. The true-balanced/differential technique, also known as True-Mode Stimulus, uses two sources to create actual differential and common-mode stimuli. This white paper offers guidance to signal integrity designers on the differences between these approaches and which one may best fit their need. P/N: 11410-00659

화이트 페이퍼 pdf 314.3 KB Version: D 2018/08/23

RF and Microwave Material Measurements: Techniques and Applications White Paper

Continual demand to accurately measure dielectric and magnetic properties of materials is a common need and is apparent in our every day lives. There is a need to quantitatively characterize material properties at RF and microwave frequencies. Learn more about the use of vector network analyzers (VNAs) as a flexible and versatile tool to accurately and quantitatively characterize material properties and showcase the broad applicability of the VNA as a tool to accurately do this at high frequencies.

화이트 페이퍼 pdf 1.2 MB Version: A 2018/03/14

By Document Type

Advanced Time Domain ADK Software

Advanced Signal Integrity Design Kits (or, ADK) is a collection of many signal integrity utility tools. It is designed to pre- and post-process signal integrity (SI) simulation and measurement data in an easy-to-use, mobile-apps-like package. It helps SI engineers identify and correct errors and correlate between simulation and measurement within a few mouse clicks. A system's design cycle time is greatly improved as a result. ADK software is required for the Advanced Time Domain (option 22). Option 22 is a licensed option available on MS4652xB VNAs. For purchase and installation information, please contact Anritsu.

driver/소프트웨어의 다운로드 exe 51.9 MB Version: 2019.05.14 2019/07/09

Advanced Time Domain ADK Software User Guide

This user guide walks you through the ADK software utility. The ADK software is required for Advanced Time Domain (option 22), which is a licensed option available on the MS46522B and MS46524B VNAs.

driver/소프트웨어의 다운로드 pdf 3.7 MB Version: 2019.05.14 2019/07/09

ADK Dongle Driver

This driver will support a removable dongle for Advance Time Domain (Option 22). Installed the driver prior to installing Advanced Time Domain ADK Software.

driver/소프트웨어의 다운로드 exe 18.1 MB Version: 7.92 2019/07/09

ShockLine VNA Software

Download the latest software for the ShockLine VNA family. This software works with the B series: MS46121B, MS46122B, MS46322B, MS46522B and MS46524B, and the A series: MS46121A, MS46122A, MS46322A. Note: This installation may require your host to be re-booted to support updates to existing drivers. This installation will require the insertion of services and drivers to your host. Please turn off all Web and Host Virus Detection Applications before starting the installation. Upon completion of the installation turn on your virus Detection Applications to their previous state.

driver/소프트웨어의 다운로드 exe 234.6 MB Version: v2019.3.2 2019/04/05

Software Release Note for the ShockLine VNAs

Software release note for the MS46121B, MS46122B, MS46322B, MS46522B, and MS46524B ShockLine family of Vector Network Analyzers.

driver/소프트웨어의 다운로드 pdf 119.9 KB Version: v2019.3.2 2019/04/05

Release Note for IVI-C Driver

Release history for the IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

driver/소프트웨어의 다운로드 exe 234.6 MB Version: v2019.3.2 2019/04/05

IVI-C Installation Files

IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

driver/소프트웨어의 다운로드 exe 100.1 MB Version: v2019.3.2 2019/04/05

Exact Uncertainty Calculator

This software can be used to calculate and plot Transmission and Reflection, Magnitude and Phase, measurement uncertainty, for VectorStar and ShockLine and family VNAs. It takes into consideration different calibration methods and kits, different conditions such as IF BW, and non-zero s11, s22, and s21, s12 conditions for transmission and reflection uncertainties respectively.

driver/소프트웨어의 다운로드 exe 748.2 KB Version: 2.04 2017/04/24

MATLAB 2012b Runtime File

This software file supports Advanced Time Domain (Option 22). Download and install prior to installing Advanced Time Domain ADK Software.

driver/소프트웨어의 다운로드 exe 342.9 MB Version: 2012b 2016/07/21

Cal Kit File Maker

The Cal Kit File Maker program provides all the files necessary to create a calibration kit file for the VectorStar, Lightning and ShockLine VNAs. The program provides a convenient set of menus for entering the required information for the different standards in the calibration kit. The program does not perform calculations, it takes the input provided and creates files in the appropriate format.

driver/소프트웨어의 다운로드 zip 4.5 MB Version: 2.02 2016/04/26

CapVNA for ShockLine VNAs

CAPVNA is a Windows program to capture, display, save and print the graphical and textual data from ShockLine VNAs. The displayed data can be loaded from a flash drive where it was previously saved at the VNA or captured directly from the VNA. The displayed data can be saved in a variety of formats to the PC's internal disk drive or a network drive and printed to a local or network printer (including color).

driver/소프트웨어의 다운로드 exe 519.3 KB Version: 2.6.9.6 2015/09/29

제품 카테고리별

기록을 찾을 수 없음
Confirm your country below to see local events, contact information and special offers.