Skip to main content
MENU

다운로드 센터

제품 모델 번호별 검색

By Document Type

Anritsu Signal Analyzers/Spectrum Analyzers

Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers, ranging from high-performance and multi-function, high-end models for R&D to handheld types for field use.

선택 가이드 pdf 2.9 MB 2019/06/28

Signal Analyzer MS2840A-040/041 (3.6 GHz/6.0 GHz model)

Signal Analyzer MS2840A-040/041 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 3.6 GHz/6 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, dedicated options for MS2840A-040/041 greatly enhance their performance to exceed that of other makers’ high-grade models (–133 dBc/Hz at measurement frequency of 500 MHz and offset frequency of 10 kHz). The standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software, analog measurement software, vector/analog signal generator options support evaluation of various digital and analog wireless equipment/devices and also adds functions for measuring amplifier noise figure (NF) values.

팜플렛 pdf 4.6 MB 2019/04/17

Signal Analyzer MS2840A-044/046 (26.5 GHz/44.5 GHz model)

Signal Analyzer MS2840A-044/046 has been developed for R&D and manufacturing of wireless equipment and devices. It has standard spectrum analyzer functions and covers a measurement frequency range from 9 kHz to 26.5 GHz/44.5 GHz. The close-in SSB phase noise performance is best-of-class for current middle range models* and the figures are equal to the high-grade models (–123 dBc/Hz at 1 GHz measurement frequency and 10 kHz offset frequency). Additionally, the standard built-in signal analyzer function supports instantaneous monitoring of spectrums, as well as various measurements, including Frequency vs. Time, Phase vs. Time, spectrogram displays, etc. Adding vector modulation analysis software and analog measurement software options support evaluation of various digital and analog wireless modulation signals and also adds functions for measuring amplifier noise figure (NF) values. Further, connecting the separately sold High Performance Waveguide Mixer enables spectrum measurements between 50 and 90 GHz for wideband wireless equipment, radar, etc.

팜플렛 pdf 4.4 MB 2019/04/17

Signal Analyzer MS2840A

Data Sheet for Signal Analyzer MS2840A and related products
Products: Signal Analyzer MS2840A, High Performance Waveguide Mixer MA2806A/MA2808A, External Mixer (Harmonic Mixer) MA2740C/MA2750C series and Noise Source, etc.

Datasheet pdf 1.0 MB 2019/04/17

Signal Analyzer MS2840A

This Configuration Guide explains how to order the new MS2840A and MS2840A retrofit options and measurement software.

설정 가이드 pdf 695.5 KB 2019/04/17

MX269017A Vector Modulation Analysis Software Operation Manual Operation

The MX269017A Vector Modulation Analysis software is a software option for performing modulation analysis of modulated signals.

조작 메뉴얼 pdf 7.5 MB Version: 32 2019/03/27

MX269017A Vector Modulation Analysis Software Operation Manual Remote Control

This application can be controlled from an external controller (PC) by remote control commands using the MS269x Series, MS2830A or MS2840A Signal Analyzer. The remote control commands are defined by the SCPI format.

조작 메뉴얼 pdf 1.7 MB Version: 25 2019/03/27

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual Signal Analyzer Function Remote Control

Automatic measurement can be performed by using this instrument in connection with an external controller (PC). This instrument is standardly equipped with GPIB, Ethernet, and USB interfaces. You can also select a remote control command from the SCPI mode, which is a command format defined by the SCPI Consortium, and Native mode, which is our unique format. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual (Mainframe Remote Control) for how to switch the language mode. You can use the Native mode by converting SCPI commands into Native ones. See the MS2690A/MS2691A/MS2692A and MS2830A/MS2840A Signal Analyzer Operation Manual (Mainframe Remote Control) for details. To use the Signal Analyzer function on the MS2830A or MS2840A, Analysis Bandwidth 10 MHz Option or greater is required.

조작 메뉴얼 pdf 2.4 MB Version: 36 2019/03/07

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual Noise Figure Measurement Function Operation

The MS2690/MS2691/MS2692A or MS2830A/MS2840A/MS2850A Signal Analyzer enables high-speed, high-accuracy, and simple measurements of transmission characteristics of base stations and mobile stations for various types of mobile communications.

조작 메뉴얼 pdf 2.3 MB Version: 9 2019/03/07

MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual Signal Analyzer Function Operation

The MS2830A, MS2840A, MS2850A Signal Analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added. The signal analyzer application (hereinafter “this application”) enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. In addition, the FFT process (high-speed Fourier conversion) realizes high-speed spectrum analysis and simultaneous analysis on frequency and time axes not possible with conventional sweep-type spectrum analyzers. Also, added option enables recording of the RF input signal as digital data (digitize function). It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.

조작 메뉴얼 pdf 8.5 MB Version: 23 2019/03/07

MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual Spectrum Analyzer Function Operation

The MS2830A/MS2840A/MS2850A Signal Analyzer is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The spectrum analyzer function enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.

조작 메뉴얼 pdf 8.6 MB Version: 38 2019/03/07

MS2840A Signal Analyzer Operation Manual Mainframe Operation

The MS2840A Signal Analyzer (“the MS2840A” hereafter) is a spectrum analyzer to which options such as real-time signal analysis and vector modulation analysis can be added.
The MS2840A enables high-speed and high-accuracy signal processing of wide-ranging analyses at full-span, a characteristic of conventional sweep-type spectrum analyzers, using a digital IF block. In addition, the FFT process (high-speed Fourier conversion) realizes high-speed spectrum analysis and simultaneous analysis on frequency and time axes not possible with conventional sweep-type spectrum analyzers. Also, added option enables recording of the RF input signal as digital data (digitize function). It can be used in a variety of applications from research and development to manufacturing thanks to its characteristics.

조작 메뉴얼 pdf 6.0 MB Version: 15 2019/03/07

MX269xxxA series Software - Waveform Pattern MX2690xxA / IQproducer MX2699xxA

MS269xA Signal Analyzer and MS2830A Signal Analyzer supports a built-in Vector Signal Generator. The addition of the MS269xA-020 or MS2830A-020/021, Vector Signal Generator option to the MS269xA or MS2830A Signal Analyzer creates a powerful one-box tester that can be configured to support various communication technologies.

팜플렛 pdf 3.0 MB 2019/03/06

Measurement Software MX2690xxA series / MX2830xxA series / MX2850xxA series

This is the brochure for the measurement software supported by Signal Analyzer MS269xA, MS2850A, MS2840A and MS2830A.

팜플렛 pdf 6.2 MB 2019/03/06

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A Signal Analyzer Vector Signal Generator Operation Manual IQproducerTM

This operation manual describes the functions of the IQproducerTM, except for the signal generation application.

조작 메뉴얼 pdf 4.5 MB Version: 11 2018/11/05

Signal Analyzer and Signal Generator Security Policy

This document explains the latest safety measures and procedures described in the instruction manual that customers should implement to secure Anritsu signal analyzers and signal generators running Windows against malware. It also explains relevant instrument types and configurations.

리플렛 pdf 660.5 KB 2018/09/14

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A/MS2850A Signal Analyzer Operation Manual Mainframe Remote Control

Automatic measurement can be performed in combination with an external controller (PC). The MS2690A/MS2691A/MS2692A or MS2830A/MS2840A/MS2850 is equipped with GPIB, Ethernet and USB interfaces as standard.

조작 메뉴얼 pdf 3.7 MB Version: 39 2018/08/16

MX269018A Analog Measurement Software/ MS2830A/MS2840A Signal Analyzer Analog Signal Generator Operation Manual

The MX269018A Analog Measurement Software is a software option used to measure the transmission and reception characteristics of radios which use analog modulation.

조작 메뉴얼 pdf 5.2 MB Version: 22 2018/08/16

Software Package Install Simple Operation Guide

This guide explains the simple procedure for installing firmware in the Signal Analyzer MS2830A, MS2840A, MS2850A, MS2690A, MS2691A and MS2692A.

유저 가이드 pdf 432.3 KB 2018/07/03

Analog Wireless (FM/ΦM/AM) Test Solution Analog Measurement Software MX269018A

The Analog Measurement Software MX269018A is software for measuring the TRx performance of radio equipment using analog modulation (FM/ΦM/AM). The Signal Analyzer MS2830A supports all-in-one tests of key analog wireless TRx characteristics using the built-in optional analog signal generator and audio analyzer. The Signal Analyzer MS2840A supports tests of key analog wireless Tx characteristics.

제품의 소개 pdf 2.5 MB 2018/07/03

By Document Type

Software Download Service

You can download a product firmware that you have and the latest related software. (The product registration of this service is necessary to use this download service.)

driver/소프트웨어의 다운로드 2019/03/27

제품 카테고리별

기록을 찾을 수 없음
Confirm your country below to see local events, contact information and special offers.