This Reference Manual provides information about the VectorStar Broadband/Banded Millimeter-Wave Modules. These modules are used with the ME7838 Series VectorStar Broadband/Banded Millimeter-Wave VNA Systems. P/N: 10410-00311
퀵 reference guide
pdf 7.1 MB
Version: F
2019/11/15
The VectorStar E and W band mmWave system incorporates the high-performance, compact Anritsu mmWave modules in an economical extended E or W band configuration. P/N: 11410-00672
팜플렛
pdf 532.5 KB
Version: H
2019/11/06
Performing on-wafer measurements presents a unique set of challenges. Achieving accurate on-wafer measurements requires careful planning of installation, calibration, and measurement configuration. Often, multiple parameters must be included in the overall analysis. This application note describes how S-parameters and spectrum analysis can be monitored simultaneously from 70 kHz to 110 GHz using a combination of the VectorStar ME7838A broadband system, the Spectrum Master MS2760A ultraportable spectrum analyzer, and the Anritsu MN25110A W1 coaxial precision directional coupler. P/N: 11410-01147
application note
pdf 3.1 MB
Version: A
2019/11/05
This manual provides general service and maintenance instructions for Anritsu ME7838x4 Multiport Broadband Millimeter-Wave Vector Network Analyzer System. P/N: 10410-00736
보수 메뉴얼
pdf 6.5 MB
Version: D
2019/09/09
This technical data sheet provides technical specifications for the VectorStar ME7838A4 Series Multiport Broadband Vector Network Analyzers. P/N: 11410-00704
Datasheet
pdf 6.2 MB
Version: J
2019/08/30
This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-01100
Datasheet
pdf 5.9 MB
Version: A
2019/08/30
This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-01099
Datasheet
pdf 5.7 MB
Version: A
2019/08/30
This guide provides quick setup instructions for the ME7838A4 Multiport Broadband/Banded mm-Wave VNA System assembly. P/N: 10410-00735
퀵 스타트 가이드
pdf 3.6 MB
Version: B
2019/08/30
This guide provides quick setup instructions for the ME7838D4 Multiport Broadband/Banded mm-Wave VNA System assembly. P/N: 10410-00770
퀵 스타트 가이드
pdf 3.8 MB
Version: A
2019/08/30
This guide provides quick setup instructions for the ME7838E4 Multiport Broadband/Banded mm-Wave VNA System assembly. P/N: 10410-00771
퀵 스타트 가이드
pdf 3.4 MB
Version: A
2019/08/30
This guide provides warranty, safety and regulatory compliance information for the VectorStar Series VNA products. P/N: 10100-00063
Datasheet
pdf 1.6 MB
Version: E
2019/08/29
This manual provides description and maintenance instructions for the Model 3656B W1 (1 mm) Calibration and Verification Kit and describes the use of the Anritsu 2300-584-R Performance Verification Software (PVS)
for the VectorStar ME7838x and ME7838x4 Series. P/N: 10410-00286
유저 가이드
pdf 17.7 MB
Version: L
2019/08/29
This manual provides description and maintenance instructions for the Model 3659 0.8 mm Calibration and Verification Kit and describes the use of the Anritsu 2300-580-R Performance Verification Software (PVS) for
the VectorStar ME7838D Modular BB/mm-Wave VNA Measurement System. P/N: 10410-00327
유저 가이드
pdf 8.6 MB
Version: C
2019/08/29
This manual provides instructions for setup and initial test of the VectorStar ME7838A4 Multiport Broadband/Banded Millimeter Wave Vector Network Analyzer (VNA) System. P/N: 10410-00734
인스톨 가이드
pdf 8.0 MB
Version: B
2019/08/29
Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800
팜플렛
pdf 18.2 MB
Version: M
2019/08/27
This document outlines the procedure for configuring the IC-CAP 2018 software to add a VectorStar system to the hardware instrument list. P/N: 11410-01136
application note
pdf 116.0 KB
Version: A
2019/08/27
This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00065
Datasheet
pdf 107.3 KB
Version: A
2019/08/13
This important display allows design engineers to observe the likelihood of bit errors due to level compression, jitter, slew and edge distortion as well as other effects. P/N: 11410-00919
application note
pdf 1.6 MB
Version: B
2019/06/21
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
카탈로그
pdf 12.3 MB
Version: T
2019/06/05
In 1965, Anritsu filed the patent that defined the first modern Vector Network Analyzer (VNA).
We are proud to continue that tradition of innovation to the present day—with the world’s first portfolio of VNAs that bring Nonlinear Transmission Line (NLTL) technology to every measurement scenario from on-wafer device characterization to R&D testing to manufacturing and field operations. P/N: 11410-00905
팜플렛
pdf 7.3 MB
Version: E
2019/05/07