The all-in-one portable 40/100G Ethernet Analyzer MD1260A supports the latest high-speed transmission technologies, such as 40/100 GbE, OTU3, and OTU4. It has all the functions needed for manufacturing and installing equipment and networks.
The MD1260A 40/100G Ethernet Analyzer is a measuring instrument for
R&D and manufacturing of 40/100 Gigabit Ethernet (40/100 GbE) and
OTN (OTU3/OTU4) equipment.
When the MD1260A is connected to the DUT , test patterns can be sent
and received and bit errors and latency can be measured.
The remote control function sends commands via the communications
interface from the remote control PC to set the measuring instrument
and read the measurement results and measuring instrument conditions.
The MD1260A 40/100G Ethernet Analyzer supports the Ethernet
interface. (When the option is installed, the GPIB interface can be used.)
When using either interface, set the number to distinguish the MD1260A
from other equipment. When using the Ethernet interface, the IP address
is set, and when using the GPIB, the GPIB address is set.
The MD1260A is All-in-One Compact 40/100G Ethernet Analyzer. It is a measuring instrument for assuring the quality of high-speed networks forming the foundation of next-generation applications for cloud computing.
This is called a basic application (MD1260A-001 100GbE / MD1260A-002 OTU4 / MD1260A-003 40GbE / MD1260A-004 OTU3) of MD1260A.
The Add-on function is used with a combination of basic applications for a
MZ1225A Adapter for QSFP+ is an adapter to convert the QSFP+ module
to the CFP module form.
The MZ1225A is used being inserted to the measurement port (CFP
module installation part) of the MD1260A 40/100G Ethernet analyzer
(hereinafter referred to as MD1260A).
This equipment is used by inserting it into the measurement port (part where CFP module installed) of the MD1260A 40/100G Ethernet Analyzer (MD1260A hereafter).
It adapts the CFP connector I/O electrical signals (10.3 or 11.18 Gbit/s) to SMP coaxial connectors.