Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800
This Measurement Guide documents the Power Meter and the High Accuracy Power Meter for the following Anritsu instruments: BTS Master, Site Master, Spectrum Master, and Cell Master. P/N: 10580-00240
This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu Power Meters, Power Master™, USB Power Sensors, Thermal Sensors, and Diode Sensors. Be sure to
read these important notices before operating the equipment. P/N: 10100-00066
Download this solution card for an overview of the Power Sensors and Meters available from Anritsu. P/N: 11410-00558
This Quick Start Guide provides information on installing the Anritsu PowerXpert application and the MA24100A series, MA24200A series, and MA24300A series power sensors. Included are instructions for making basic power measurements. P/N: 10585-00021
퀵 스타트 가이드
This quick overview features the Anritsu family of USB Power Sensors and provides the special features of the USB Power Sensors along with tables that make product selection a breeze.
This manual provides general information, as well as installation and operating information for the Anritsu MA24100A series, MA24200A series, and MA24300A series USB Power Sensors and the Anritsu PowerXpert software application.
The Power Sensor Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00008
This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu Power Meters, Power Master, USB Power Sensors, Thermal Sensors, and Diode Sensors. Be sure to read these important notices before operating the equipment.
online help 시스템
The Anritsu MA24105A Inline Peak Power Sensor is designed to take accurate average power measurements over 2 mW to 150 W, from 350 MHz to 4 GHz. The sensor employs a “dual path” architecture that enables True-RMS measurements over the entire frequency and dynamic range allowing users to measure CW, multi-tone and digitally modulated signals such as GSM/EDGE, CDMA/EV-DO,W-CDMA/HSPA+, WiMAX, and TD-SCDMA. The forward direction path also include a 4 MHz bandwidth channel that has peak and comparator/integrator circuits that add measurement functions such as peak envelope power (PEP), crest factor, complimentary cumulative distribultion function (CCDF), and burst average power. Another detection circuit on the reverse direction adds reverse power measurement capabilities including reverse power, reflection coefficient, return-loss, and SWR. The presence of a micro-controller along with signal conditioning circuitry, ADC, and power supply in the sensor makes it a complete miniature power meter.
Keep your system up and running longer
with an inline, bi-directional, peak power