Skip to main content

High Speed Serial Data Test Solutions

Next-Generation Digital I/F Rx Tests

hssd-index-mainvisual

IoT 디바이스와 클라우드 컴퓨팅 서비스의 확산으로 인해 디지털 디바이스에서 처리되는 데이터 트래픽이 폭발적으로 증가하고 있으며, 그 결과 더 빠른 직렬 장치 인터페이스가 요구되고 있습니다. 디지털 디바이스에서 사용되는 PCIe 및 USB 인터페이스는 보다 큰 데이터 볼륨을 처리하므로 차세대 PCI Express Rev 4.0 표준이 16GT/s의 고속에 도달하는 한편, USB 3.1 Gen2는 10Gbit/s를 지원하며, USB 3.1 Type-C는 20Gbit/s도 지원하는 Thunderbolt와도 호환됩니다.

Target Applications

Multi-interface Support using Wideband MP1800A/MP1900A BERT

Signal Quality Analyzer MP1800A는 초기 개발부터 생산까지 32Gbit/s PPG, ED, jitter 및 노이즈 추가 기능과 전체 애플리케이션 소프트웨어 라인업을 갖춘 고속 차세대 디지털 인터페이스 입니다. (CEI-28G/56G, InfiniBand, 100/400G 이더넷, 파이버 채널, Thunderbolt 3, PCI Express, USB)

Multi-interface Support using Wideband MP1800A BERT

 

High Speed Interface Receiver Test Solutions

이 응용 프로그램 소프트웨어를 MP1800A/MP1900A에 설치하면 PCI Express 및 USB 디바이스 평가 및 Jitter Tolerance 테스트에 필요한 링크 시퀀스 패턴 생성을 지원합니다. MX183000A는 차세대 PCI Express 및 USB 표준을 지원하는 장치를 평가하는 데 필요한 링크 시퀀스를 생성하여 SERDESIC jitter 허용 오차 테스트뿐만 아니라 디지털 장비 내부 및 외부 인터페이스 테스트에 사용할 수 있습니다.

 

Jitter Tolerance Test Function (MX183000A-PL001) mp1800a-iconmp1900a-icon

  • Supports versatile Jitter Tolerance measurements
  • Injects SJ/RJ/BUJ for PHY device Jitter Tolerance tests
  • Supports Mask measurements for various standards
  • Shortens measurement time using low-error-rate (1E-12, 1E-15, etc.) estimation function
  • Uses Binary, Upward, Downward, and Binary + Linear search methods to measure tolerance points dependent on device characteristics

Low-Rate Estimated BER Measurement
Low-Rate Estimated BER Measurement

 

PCI Express Link Sequence Generation Function (MX183000A-PL011) mp1800a-iconmp1900a-icon

  • Uses training sequence generation to set PCI Express Gen1 to 4 devices to Loopback state
  • Automates Pass/Fail evaluation of devices transitioned to Loopback state
  • Generates 8B/10B, 128B/130B, Scramble, SKIP Insertion

LTSSM Parameter Setting Screen
LTSSM Parameter Setting Screen

Pass/Fail Screen
Pass/Fail Screen

 

PCIe Link Training and LTSSM Analysis Function (MX183000A-PL021) mp1900a-icon

  • Protocol aware, all-in-one, PCI Express Gen 1 to 5 Receiver Test
  • Link Training and LTSSM Analysis functions
Anritsu MP1900A BERT Link Training
Supports physical layer measurements of add-in cards and system boards
  • Tx/Rx Link Equalization Response Test
  • Rx Link Equalization Test
  • Receiver Jitter Tolerance Test
Anritsu MP1900A BERT Link Training State transitions
Link Training State transitions
LTSSM Log LTSSM Log

 

USB Link Sequence Generation Function (MX183000A-PL012) mp1800a-icon

  • Sets Link Sequence, Sequence type, and test pattern, and transitions to Loopback mode for evaluating USB3.1 Gen1, Gen 2 devices
  • Generates 8B/10B, 128B/132B, Scramble, SKIP Insertion, LFPS

Link Sequence Setting Screen
Link Sequence Setting Screen

LFPS Setting Screen
LFPS Setting Screen

 

USB Link Training (MX183000A-PL022) mp1900a-icon

  • Protocol aware, all-in-one, USB3.1 Rx test solution
  • Link Training and LTSSM Analysis
Controls transition to Loopback (Link Training function)
Controls transition to Loopback (Link Training function)
Supports Link troubleshooting (LTSSM Analysis function)
Supports Link troubleshooting (LTSSM Analysis function)

 

Software

Item PCI Express USB Thunderbolt General
Calibration
mp1900a-icon*
GRL-USB31-RXA
mp1800a-iconmp1900a-icon*
GRL-TBT3-RXA
mp1800a-iconmp1900a-icon*
Link Sequence Generation MX183000A-PL011
mp1900a-icon
MX183000A-PL012
mp1800a-icon
Link Training MX183000A-PL021
mp1900a-icon
MX183000A-PL022
mp1900a-icon
Jitter Tolerance Test Pass/Fail GRL-USB31-RXA
mp1800a-icon
GRL-TBT3-RXA
mp1800a-icon
Margin MX183000A-PL001
mp1900a-icon
MX183000A-PL001
mp1800a-iconmp1900a-icon
MX183000A-PL001
mp1800a-iconmp1900a-icon
*: Please Contact our Business Section about MP1900A support.

 


 

Related Products

Details of the latest information for MP1900A

Confirm your country below to see local events, contact information and special offers.