Control Packages for TI Devices
In partnership with TI, Anritsu has developed control packages that provide a fully automated test solution for the devices listed below. Each control package uses a DLL containing commands that enable CombiTest to configure the chipsets from within a test plan. These commands are sent to the device via a host processor interface. When the test plan is executed, both the MT8860B/C and device are simultaneously controlled, allowing the test plan to proceed to completion in a fully automated manner.
| Device Type |
TI Control Software |
Supported Functionality |
| WLAN Standard
|
Calibration
|
Validation
|
EEPROM Update
|
| WiLink 4.0 (1251/1253) |
TI MAPI 4.21 |
802.11a/b/g |
N |
Y |
N |
| WiLink 6.0 (1271/1273) |
Trioscope 6.0.0.205 |
802.11 a/b/g/n |
Y |
Y |
Y |
Note: TI Control Software not supplied by Anritsu
To obtain any of the control packages listed, or to enquire about control package support for other TI devices, please send an email to wlan.support@anritsu.com
関連リンク
Control Packages
WLAN Test Set
