Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
The MS276xA is truly pocket sized, but big on performance with class-leading dynamic range, sweep speed, and amplitude accuracy.
Its ultraportable size enables direct connect to almost any DUT, eliminating the need for lossy, expensive cables or antennas. The MS2760A is the world's first handheld millimeter-wave spectrum analyzer to provide continuous coverage from 9 kHz up to 110 GHz, positioning it perfectly for growing millimeter-wave applications like 5G, 802.11ad, satellite communications, automotive radar, and more. P/N: 11410-00936
This Technical data sheet includes the GPS, Yagi, Horn, Mag Mount, Wideband, Log Periodic, Whip, Bi-Blade, and Loop antennas. P/N: 11410-00376
This manual provides general information, as well as installation and operating information for the Anritsu MS276xA Spectrum Master Ultraportable Spectrum Analyzer and Spectrum Master User Interface Software. P/N: 10450-00063
This manual provides general information, as well as installation and operating information for the Anritsu MS276xA Spectrum Master Ultraportable Spectrum Analyzer and Spectrum Master User Interface Software. P/N: 10580-00427
This manual provides maintenance instructions for the MS2760A Spectrum Master. Familiarity with the basic operation of the MS2760A using the MS2760A GUI software is helpful. P/N: 10580-00433
Performing on-wafer measurements presents a unique set of challenges. Achieving accurate on-wafer measurements requires careful planning of installation, calibration, and measurement configuration. Often, multiple parameters must be included in the overall analysis. This application note describes how S-parameters and spectrum analysis can be monitored simultaneously from 70 kHz to 110 GHz using a combination of the VectorStar ME7838A broadband system, the Spectrum Master MS2760A ultraportable spectrum analyzer, and the Anritsu MN25110A W1 coaxial precision directional coupler. P/N: 11410-01147
The Ultraportable Spectrum Analyzer Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00040
The Spectrum Master MS2760A is an innovative, mmWave spectrum analyzer design.
It delivers basic spectrum analysis capabilities well below the price point of traditional spectrum analyzers and in an unimaginably small form factor that operates from 9 kHz up to 110 GHz. P/N: 11410-01019
By utilizing Anritsu's patented nonlinear transmission line (NLTL) technology, the Spectrum Master MS2760A shatters the cost, size, and performance barriers associated with traditional benchtop spectrum analyzers. The Spectrum Master MS2760A is truly pocket sized
yet big on performance, with industry-leading dynamic range, sweep speed, and amplitude accuracy. Its ultraportable size enables
direct connect to almost any DUT, eliminating the need for expensive cables at the test port that add loss and uncertainty. P/N: 11410-01054
The Spectrum Master MS2762A is pocket-sized, yet big on performance with leading dynamic range, sweep speed, and amplitude accuracy. The ultraportable size of this instrument enables a direct connection to almost any DUT, eliminating the need for lossy, expensive cables. P/N: 11410-01148
These Anritsu branded low noise amplifiers are a convenient and lightweight solution for field testing of 5G mmWave signals. The low noise amplifiers provide exceptional small signal gain and low noise figure across the frequency range of 18 GHz to 42 GHz. The amplifiers have a built-in regulator and USB Type-C port and can be powered via a battery pack or a laptop. The LNAs are also water resistant. P/N: 11410-01092
The USB Extenders extends the usable reach of USB peripherals, including USB power sensors and accessory dongles, for up to 100 meters over CAT 6A/7 Ethernet or up to 200 m over multimode fiber. The extenders are plug & play for all Anritsu instruments, with no drivers required. P/N: 11410-01056
10 m USB 3.0 Active Extension Cable for use with the MS2760A Spectrum Master and the MA24507A Power Master.