With the large increase in mobile data traffic, network operators are moving the BBU (BaseBand Units) from macro cell sites to a common central location allowing greater flexibility and cost savings. The connection from the BBU to the RRH (Remote Radio Head) is most commonly via CPRI at rates between 614.4 kbps to 10,137.6 Mbps. P/N: 11410-00927
製品カタログ
pdf 2.9 MB
Version: D
2023/09/11
The purpose of this application note is to detail the procedure for creating off-line maps. While there are several open source options for tile map construction, this application note will be using Map Puzzle to detail the method for incorporating these maps into the Anritsu software application. P/N: 11410-01132
アプリケーションノート
pdf 2.5 MB
Version: B
2023/09/11
Download the complete user guide for the MS2710xA family of Remote Spectrum Monitors. Chapters include Graphical User Interface, How to, and Programming with SCPI. P/N: 10580-00419
ユーザーガイド
pdf 9.1 MB
Version: P
2023/07/18
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00052 | OHS | version P | 07/18/2023
オンラインヘルプシステム
html 184.9 KB
Version: P
2023/07/18
This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu MS2710xA series remote spectrum monitors. P/N: 10100-00064
データシート
pdf 1.3 MB
Version: J
2023/07/07
This Technical data sheet includes the GPS, Yagi, Horn, Mag Mount, Wideband, Log Periodic, Whip, Bi-Blade, and Loop antennas. P/N: 11410-00376
データシート
pdf 3.3 MB
Version: Y
2023/06/14
The purpose of an in-building wireless system is to provide enhanced network coverage
and or capacity when the existing macro network is not able to adequately service the
demand. Coverage may be poor due to high penetration losses caused by the building
structure or due to low emissivity glass installed to improve the thermal performance of the building. P/N: 11410-00885
アプリケーションノート
pdf 6.8 MB
Version: D
2023/06/13
The MX280005A vector signal analysis (VSA) software supports all common digital wireless modulation standards. Fast and accurate measurements make it ideal for R&D as well as early rollout of digital radio equipment and components. P/N: 11410-02844
製品カタログ
pdf 17.9 MB
Version: D
2023/01/31
The Vector Signal Analysis software is intended for testing physical layer modulation quality of various transmission standards. P/N: 10580-00475
ユーザーガイド
pdf 37.6 MB
Version: D
2023/01/24
Help is a compilation of user documentation for easier viewing and navigation. P/N: 10450-00068 | OHS | version D | 01/24/2023
オンラインヘルプシステム
html 184.9 KB
Version: D
2023/01/24
この総合カタログ ダイジェスト版は、主要機種のみを掲載しています。
カタログ
pdf 3.2 MB
Version: 2023
2023/01/16
Spectrum monitoring systems facilitate the identification and removal of interference signals that degrade network capacity. By monitoring spectrum on a continual basis, problem signals can be identified as they occur
in real-time. Patterns of unwanted signal activity can also be examined, providing an efficient way to characterize and locate the source of the interference problem. P/N: 11410-00876
製品カタログ
pdf 9.4 MB
Version: L
2022/10/05
Capable of sweeping at rates up to 24 GHz per second, the Remote Spectrum Monitor MS27103A allows capture of many types of signals. This includes periodic or transient transmissions as well as short “bursty” signals. Also featured is a high dynamic range, high sensitivity and low spurious signals. P/N: 11410-00874
製品カタログ
pdf 2.4 MB
Version: F
2022/10/05
The MS27103A provides 12 RF Input ports as a standard configuration. 24 RF Input ports are available with Option 424. P/N: 11410-00854
データシート
pdf 1.5 MB
Version: R
2022/10/05
The MS27103A is a multiple RF input spectrum monitor ideal for measuring signals from multiple antennas. The solution provides 12 RF input ports as a standard configuration and is typically used with a three-sector BTS cellular architecture with multiple carriers per sector. This is a quick overview of the features, key specifications, and options available. P/N: 11410-01086
製品カタログ
pdf 639.1 KB
Version: C
2022/10/05
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235
カタログ
pdf 13.3 MB
Version: AD
2022/07/26
This documentation provides a description of the Anritsu’s Remote Spectrum Monitor and Vision Software API’s. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses API programing, and covers a lists of API programming commands. P/N: 10580-00435
プログラミングマニュアル
pdf 3.3 MB
Version: D
2022/07/19
Time Difference of Arrival is a technique for geo-locating RF sources. It requires three or more remote receivers capable of detecting the signal of interest. P/N: 11410-01009
アプリケーションノート
pdf 2.6 MB
Version: D
2022/06/28
衛星地上局の様々な電波干渉（5G信号など）の説明、および課題解決
アプリケーションノート
pdf 2.5 MB
Version: A
2021/12/23
The Remote Spectrum Monitor Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00041
データシート
pdf 107.9 KB
Version: B
2021/11/19
