Skip to main content
MENU

ダウンロードセンター

製品形名で検索

ドキュメントタイプ別

Spectrum Clearing and Geo-Locating Legacy Signals

To meet demand for additional bandwidth for cellular and broadcast operations, national regulators are reallocating spectrum previously used for other applications. Before a new network can be rolled out within these frequencies, it is critical for the new license owner to confirm that all legacy users have terminated their transmissions. P/N: 11410-01154

アプリケーションノート pdf 4.2 MB Version: A 2019/10/15

Remote Spectrum Monitors MS2710xA Configuration Quick Start Guide

To communicate with the MS2710xA Remote Spectrum Monitor or to change its IP configuration, a PC must be correctly set up to communicate with the instrument via a direct connection using a static IP. This guide explains how to set this up. P/N: 10580-00414

クイックスタートガイド pdf 1.4 MB Version: D 2019/07/10

Remote Spectrum Monitor MS2710xA User Guide

Download the complete user guide for the MS2710xA family of Remote Spectrum Monitors. Chapters include Graphical User Interface, How to, and Programming with SCPI. P/N: 10580-00419

ユーザーガイド pdf 8.2 MB Version: J 2019/07/10

Backhaul Requirements for Anritsu Remote Spectrum Monitors Use for RF Signal Tracking Applications

There are various methods for geo-locating an RF signal of interest. Primary alternatives include Power of Arrival (POA), Time Difference of Arrival (TDOA), and Angle of Arrival (AOA). In most situations where modulated signal bandwidths are greater than 25 kHz, TDOA provides the best accuracy. This application note focuses on the use of TDOA as a means for tracking a signal. P/N: 11410-01133

アプリケーションノート pdf 689.8 KB Version: A 2019/07/10

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

カタログ pdf 12.3 MB Version: T 2019/06/05

Remote Spectrum Monitor MS27102A Quick Fact Sheet

The Anritsu MS27102A is a remote spectrum monitor designed for remote outdoor applications. This monitor is rated to the IP67 standard, being dust tight (no ingress of dust) and water resistant. Each port on the unit is ruggedized and weatherized. Ports include power, RF Input(s), Gbit Ethernet, and GPS antenna. A quick review of the features and key specifications. P/N: 11410-01085

製品カタログ pdf 142.2 KB Version: C 2019/01/24

C-RAN In The City Poster

With the large increase in mobile data traffic, network operators are moving the BBU (BaseBand Units) from macro cell sites to a common central location allowing greater flexibility and cost savings. The connection from the BBU to the RRH (Remote Radio Head) is most commonly via CPRI at rates between 614.4 kbps to 10,137.6 Mbps. P/N: 11410-00927

製品カタログ pdf 55.2 MB Version: C 2019/01/09

SpectraVision Software MX280010A Product Brochure

SpectraVision is a suite of software options and tools used with Anritsu’s MS2710XA product line of spectrum monitors. SpectraVision is a highly modular software system covering the entire frequency range of Anritsu's Remote Spectrum Monitors. Various features incorporated into the software allow users to quickly perform automated analyses of the frequency spectrum, record measurements and generate optional reports detailing signal quality and performance characteristics. P/N: 11410-00960

製品カタログ pdf 3.4 MB Version: C 2018/10/24

Remote Spectrum Monitoring System Online Help System

This documentation provides a description of the Anritsu Remote Spectrum Monitor MS2710xA software. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses SCPI programing, and covers a lists of SCPI programming commands. P/N: 10450-00052

オンラインヘルプシステム htm 185.0 KB Version: H 2018/10/09

Remote Spectrum Monitors MS27102A Technical Data Sheet

The Anritsu platform of spectrum monitors provides high performance real-time monitoring of the radio spectrum. Designed to be stable over time under continuous operation, the MS27102A monitor provides superior sweep speeds, high dynamic range, and low spurious levels for fast and accurate measurements. Applications include monitoring for interference, white space analysis, unlicensed transmission discovery, and signal coverage. The MS27102A features an IP67 rated outdoor enclosure designed for remote operations in the harshest of environments. P/N: 11410-00847

データシート pdf 2.2 MB Version: M 2018/10/03

C-RANソリューションカタログ

Transport, Optical & RF Testing for all Elements of the C-RAN Network. Anritsu has a long history of testing all aspects of the C-RAN. Our instruments evolve to meet the new challenges of testing the C-RAN networks being rolled out today. Put our experience to work for you!

製品カタログ pdf 3.2 MB Version: B 2018/03/29

Understanding IBW In-Building Wireless: DAS to Small Cells Application Note

The purpose of an in-building wireless (IBW) system is to provide enhanced network coverage and/or capacity when the existing macro network is not able to adequately service the demand. Coverage may be poor due to high penetration losses caused by the building structure or due to low emissivity glass installed to improve the thermal performance of the building. In dense urban environments, adjacent buildings may create an RF barrier that blocks coverage from nearby macro sites. Tall buildings typically have poor coverage on upper floors since macro site antennas, many floors below, are specifically designed to suppress energy radiating above the horizon. Capacity may be an issue in venues such as stadiums, coliseums and convention centers where many thousands of users may be trying to simultaneously access the network.

アプリケーションノート pdf 1.8 MB Version: C 2018/03/28

Interference Hunting: 4 Steps to Success Brochure

This solution brochure covers the four steps to success when interference hunting, as well as which Anritsu product/solution is suitable for each step in the process. P/N: 11410-00900

製品カタログ pdf 2.5 MB Version: B 2018/02/22

Remote Spectrum Monitor MS27102A Product Brochure

A spectrum monitoring system will facilitate the identification and removal of illegal or unlicensed interference signals. By monitoring spectrum on a continual basis, problem signals can be identified as they occur in real time. Patterns of unwanted signal activity can also be examined, providing an efficient way to characterize and locate the source of the interference problem.

製品カタログ pdf 3.7 MB Version: D 2018/01/16

Vision Software MX280001A API Programming Manual

This documentation provides a description of the Anritsu’s Remote Spectrum Monitor (RSM) and Vision Software API’s. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses API programing, and covers a lists of API programming commands. API's are presented both for control of Anritsu's RSM hardware product line (MS2710XA) as well as for Vision software. Most features in Vision are paid options. In order for these options to work, the RSM hardware must have these options enabled. Please see the Vision software Product Brochure and User Guide for option information.

プログラミングマニュアル pdf 2.2 MB Version: B 2018/01/16

Remote Spectrum Monitors MS2710xA Product Information, Compliance, and Safety

This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu MS2710xA series remote spectrum monitors. P/N: 10100-00064

データシート pdf 1.2 MB Version: D 2018/01/16

Anritsu Remote Spectrum Monitor MS27102A - The perfect tool for maritime port monitoring

Customs and Border Protection agencies have a complex mission at ports of entry with broad law enforcement authorities tied to screening all foreign visitors, returning native citizens, and imported cargo that enters the country via land, air, and sea ports. Interference caused by RF signals, whether illicit or simply bandwidth intensive, complicate this mission even further.

リーフレット pdf 1.5 MB Version: A 2017/11/29

Remote Monitoring Mission Critical Positive Train Control Networks

Positive Train Control (PTC) is an advanced communications system to minimize train accidents by automatically controlling train activity. This includes real-time monitoring of static and dynamic conditions that require the train to slow or stop. Clifton Weiss & Associates, Inc. (CWA) was retained as professional consulting engineers to conduct a 3-year study of interfering RF signals on an actively operating Northeast commuter railway. The Case Study talks about and discusses the challenges and solutions.

ケーススタディ pdf 1.7 MB Version: A 2017/09/25

Remote Spectrum Monitor MS2710xA Maintenance Manual

This manual provides maintenance instructions for Anritsu Remote Spectrum Monitor, Models MS27101A, MS27102A and MS27103A.

保守マニュアル pdf 2.2 MB Version: D 2017/08/30

Remote Spectrum Monitor Declaration of Conformity

The Remote Spectrum Monitor Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00041

データシート pdf 24.4 KB Version: A 2017/06/09

ドキュメントタイプ別

Firmware Update for the Remote Spectrum Monitor MS27100A, MS27101A, MS27102A and MS27103A

Download the latest firmware for the Anritsu Remote Spectrum Monitor models MS27100A, MS27101A, MS27103A, and MS27103A.

ドライバ/ソフトウェアのダウンロード tar 55.3 MB Version: 2018.9.4 2019/11/05

Firmware Revision History for the MS2710xA

Firmware Revision History for the MS27100A, MS27101A, MS27102A, and MS27103A Spectrum Monitors.

ドライバ/ソフトウェアのダウンロード pdf 141.7 KB Version: 2018.9.4 2019/11/05

Vision Software MX280001A

The Vision software platform works with Anritsu's spectrum monitoring hardware to automate the process of collecting measurement data, providing useful information about network health and use of the spectrum. Applications for Vision include accumulating historical spectral data to inform spectrum policy, satellite reception interference detection and monitoring for illegal use of spectrum. Once an interference signal is identified, Vision uses various algorithms to geo-locate the position of the signal of interest.

ドライバ/ソフトウェアのダウンロード msi 297.0 MB Version: 2019.6.1 2019/06/28

Vision Software MX280001A Release History

Release History.

ドライバ/ソフトウェアのダウンロード htm 24.7 KB Version: 2019.6.1 2019/06/28

Ethernet Discovery Program

The UDP Discovery Tool is a Windows application that will display a sortable list of available MS2710xA or MS2090A Anritsu devices on a network. This tool provides the ability to find and filter devices by Hostname, Model number, Serial number, MAC address, Version number, or by IP Address. If needed, the tool also provides the ability to save the results of your search and to view a brief history of your searches for comparison.

ドライバ/ソフトウェアのダウンロード exe 31.8 MB Version: 2019.04.1 2019/04/30

Release History for the Ethernet Discovery Program

Release History for the Ethernet Discovery Program which works with the Remote Spectrum Monitors, and the Field Master Pro.

ドライバ/ソフトウェアのダウンロード pdf 109.4 KB Version: 2019.04.1 2019/04/30

Secure Mode for Spectrum Monitors

Add a password protect to your spectrum monitor, using this utility feature.

ドライバ/ソフトウェアのダウンロード zip 4.1 MB Version: A 2018/10/09

Remote Spectrum Monitor MS2710xA FOSS Disclosures and Licenses

Disclosures for use of free and open source software.

ドライバ/ソフトウェアのダウンロード zip 12.1 MB 2016/06/27

製品カテゴリ別

Confirm your country below to see local events, contact information and special offers.