This guide provides warranty, safety and regulatory compliance information for the VectorStar Series VNA products. P/N: 10100-00063
データシート
pdf 2.0 MB
Version: M
2022/08/09
This Reference Manual provides information about the VectorStar Broadband/Banded Millimeter-Wave Modules. These modules are used with the ME7838 Series VectorStar Broadband/Banded Millimeter-Wave VNA Systems. P/N: 10410-00311
クイックリファレンスガイド
pdf 7.9 MB
Version: J
2022/08/09
This manual provides general service and maintenance instructions for Anritsu ME7838x4 Multiport Broadband Millimeter-Wave Vector Network Analyzer System. P/N: 10410-00736
保守マニュアル
pdf 6.9 MB
Version: J
2022/08/09
This manual provides information for remote operation of the VectorStar MS4640B Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus, USB, and Ethernet. P/N: 10410-00322
プログラミングマニュアル
pdf 30.8 MB
Version: AC
2022/08/09
This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-01100
データシート
pdf 4.9 MB
Version: F
2022/08/09
This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-01099
データシート
pdf 4.7 MB
Version: F
2022/08/09
This technical data sheet provides technical specifications for the VectorStar ME7838A4 Series Multiport Broadband Vector Network Analyzers. P/N: 11410-00704
データシート
pdf 5.2 MB
Version: P
2022/08/09
The VectorStar E and W band mmWave system incorporates the high-performance, compact Anritsu mmWave modules in an economical extended E or W band configuration. P/N: 11410-00672
製品カタログ
pdf 951.2 KB
Version: J
2022/08/09
This two page quick fact sheet lists out the different configurations for the ME7838A 2-port and 4-port Millimeter-Wave (mmWave) Systems. P/N: 11410-00670
製品カタログ
pdf 942.5 KB
Version: E
2022/08/09
The ME7838G4 allows a continuous, broadband frequency sweep, in a four-port setup, from 70 kHz to 220 GHz without the need to concatenate multiple systems (operational from 40 kHz to 226 GHz). P/N: 11410-01196
データシート
pdf 4.2 MB
Version: B
2022/08/09
This Technical Data Sheet provides the specifications for the VectorStar Broadband System ME7838AX 2-port and ME7838A4X 4-port Vector Network Analyzer. P/N: 11410-02825
データシート
pdf 9.1 MB
Version: B
2022/08/09
This Technical Data Sheet provides the specifications for the VectorStar Broadband System ME7838EX 2-port and ME7838E4X 4-port Vector Network Analyzer. P/N: 11410-02827
データシート
pdf 8.6 MB
Version: B
2022/08/09
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
カタログ
pdf 13.3 MB
Version: AD
2022/07/26
This solution flyer discusses how the Polar Instrument solution and Anritsu VNAs have unique capabilities for making Delta-L PCB measurements which helps customers make quick and accurate measurements results. P/N: 11410-02880
製品カタログ
pdf 1.8 MB
Version: A
2022/05/11
The 0.8 mm Connector family is a complete coaxial connector system with single-mode performance to 145 GHz. It contains male and female non-hermetic connectors, male and female broadband terminations and in-series adapters. P/N: 11410-00317
データシート
pdf 826.6 KB
Version: B
2022/02/25
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with the SWISSto12 MCK systems, and are ideal for active and passive material measurements. P/N: 11410-01167
リーフレット
pdf 1.1 MB
Version: C
2022/01/27
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with Compass Technology hardware fixtures and CTG software systems, and make an ideal solution for material measurements. P/N: 11410-01182
リーフレット
pdf 1.5 MB
Version: C
2022/01/27
Anritsu’s ShockLine and VectorStar series vector network analyzers are now compatible with all the available solutions from Keycom Technologies for various types of material measurements methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and many more. P/N: 11410-01191
リーフレット
pdf 1.4 MB
Version: C
2022/01/27
This manual provides description and maintenance instructions for the Model 3656C W1 (1 mm) Calibration and Verification Kit and describes the use of the Anritsu Performance Verification Software (PVS). P/N: 10410-00784
ユーザーガイド
pdf 13.2 MB
Version: A
2021/10/01
This manual provides instructions for setup and initial test of the VectorStar ME7838A4 Multiport Broadband/Banded Millimeter Wave Vector Network Analyzer System. P/N: 10410-00734
インストールガイド
pdf 8.6 MB
Version: E
2021/09/14
