Skip to main content

Download Center

Search by product Model Number

By Document Type

3GPP Signal Analyzer Measurement Guide

This Measurement Guide documents 3GPP signal analysis for the following Anritsu instruments: BTS Master, Cell Master, Spectrum Master, and LMR Master. P/N: 10580-00234

Measurement Guide pdf 19.9 MB Version: AE 1/16/2020

3GPP2 Signal Analyzer Measurement Guide

This Measurement Guide documents 3GPP2 signal analysis for the BTS Master, Cell Master, and Spectrum Master. P/N: 10580-00235

Measurement Guide pdf 3.4 MB Version: F 1/16/2020

WiMAX Signal Analyzer for Anritsu RF and Microwave Handheld Instruments

This Measurement Guide documents WiMAX signal analysis for the BTS Master, Cell Master, LMR Master, and the Spectrum Master. P/N: 10580-00236

Measurement Guide pdf 9.9 MB Version: F 1/16/2020

Spectrum Master MS272xC User Guide

This user guide is specific to the Spectrum Master MS272xC (models MS2722C, MS2723C, MS2724C, MS2725C, and MS2726C).

User Guide pdf 6.2 MB Version: E 10/11/2016

Spectrum Master MS272xC Maintenance Manual

This manual provides maintenance instructions for Anritsu Spectrum Master Models MS2722C, MS2723C, MS2724C, MS2725C, and MS2726C. It provides a list of recommended test equipment, performance verification procedures, parts replacement procedures, replaceable parts list, and test records.

Maintenance Manual pdf 15.3 MB Version: E 1/20/2016

Spectrum Analyzer Measurement Guide

This Measurement Guide documents spectrum analysis, interference analysis, channel scanner function, Zero-Span IF Output, Gated Sweep, Coverage Mapping, CW Generator, AM/FM/PM analysis and IQ Waveform Capture analysis for Anritsu handheld instruments.

Measurement Guide pdf 19.2 MB Version: M 12/18/2014

Spectum Analyzer Measurement Guide

This Measurement Guide documents spectrum analysis, interference analysis, channel scanner function, Zero-Span IF Output, Gated Sweep, IQ Waveform Capture, Coverage Mapping, and AM/FM/PM analysis for Anritsu handheld instruments. [P/N: 10580-00244]

Measurement Guide pdf 19.2 MB Version: M 12/18/2014

Spectrum Master MS2725C Technical Data Sheet

Anritsu’s high performance handheld spectrum analyzer provides the wireless professional the performance needed for the most demanding measurements in harsh RF and physical environments. Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument to making fast and reliable measurements.

Datasheet pdf 1.3 MB Version: J 6/11/2013

Spectrum Master MS272xC Programming Guide

This SCPI Programming Manual provides information for remote operation of the Spectrum Master MS272xC High Performance Base Station Analyzer using commands sent from an external controller via Ethernet or USB connection. This Programming Manual includes the following:...

Programming Manual pdf 1.7 MB Version: D 4/13/2012

Spectrum Master MS272xC Online Help System

High Performance Handheld Spectrum Analyzer Anritsu's handheld spectrum analyzers with five models including the industry’s first 32 GHz and 43 GHz models. The Spectrum Master MS272xC features over 30 analyzers in one to meet virtually every measurement need. This Online Help System provides information about the operation, programming and use of the Anritsu MS2722C, MS2723C, MS2724C, MS2725C and MS2726C Spectrum Master family of products.

Online Help System htm 1.4 KB Version: A 1/6/2011

By Document Type

Anritsu Software Tool Box (Full Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer may not require internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools. This stand-alone installer will download all Anritsu software needed to install your chosen PC Tools software, and do so all in one file. This is ideal if you will be doing the installation on a computer without internet access. Windows 7, Windows 8 or Windows 10 computers may still need internet access to download the Microsoft .NET 3.5 suite of support files.

Drivers Software Downloads exe 388.8 MB Version: 1.18 4/10/2019

Anritsu Software Tool Box (Web Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer requires internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools.

Drivers Software Downloads exe 401.0 KB Version: 1.09 1/9/2018

Firmware Update for the Spectrum Master MS272xC

This firmware update contains the latest upgrades for your instrument. Once downloaded, run the file on your computer to see the installation instructions.

Drivers Software Downloads exe 43.0 MB Version: 2.30 5/17/2016

Firmware Revision History for the Spectrum Master MS272xC

Firmware release history for the Spectrum Master MS272xC Handheld Spectrum Analyzers.

Drivers Software Downloads pdf 370.7 KB Version: 2.30 5/17/2016

Updating Anritsu Handheld Instrument Firmware

This document provides an overview of the firmware update process. For further details, please refer to the user guide for your Anritsu handheld instrument.

Drivers Software Downloads pdf 344.1 KB 10/30/2015

By Product Category

How do I copy files from my internal memory to my USB memory stick?

  The steps below detail copying a file from internal memory to an external flash drive.   NOTE: Select the files to copy in the top window and the location for the files to be copied to in the bottom window.   Insert a USB drive into either USB Type A port of the Site Master.   From the File main (shift/file (#7 key)) menu, press the “Copy (soft key)” submenu key. The Copy submenu and Copy dialog box are displayed (picture below).   Select the file(s) to copy. To select multiple files, highlight the first then press the “Select or De-Select” key to keep the file selected.  NOTE: (Press again to de-select if you choose not to copy the file.) The file will be outlined in blue. Repeat with all the files to copy. To display files in a folder, select the folder and press the Enter key.   Press the Scroll key and highlight the USB drive and press “select or de-select” soft key in the lower window using the touch screen or the Up/Down arrow keys or Thumb Wheel. NOTE: The Scroll submenu key toggles between Src (top window) and Dst (bottom window). Basically, the top window (src) is where you copy from and the bottom (dst) is where those files are going to.   Press the Copy key to copy the files to the flash drive.       NOTE:   If you want to check and see if those files have been copied, simply press the Scroll soft key (to get to your Src or source box), use your Up/Down arrows or Thumb Wheel to get to your USB Drive and press “Enter”. 

How do I copy files from my internal memory to my USB memory stick?

  The steps below detail copying a file from internal memory to an external flash drive.   NOTE: Select the files to copy in the top window and the location for the files to be copied to in the bottom window.   Insert a USB drive into either USB Type A port of the Site Master.   From the File main (shift/file (#7 key)) menu, press the “Copy (soft key)” submenu key. The Copy submenu and Copy dialog box are displayed (picture below).   Select the file(s) to copy. To select multiple files, highlight the first then press the “Select or De-Select” key to keep the file selected.  NOTE: (Press again to de-select if you choose not to copy the file.) The file will be outlined in blue. Repeat with all the files to copy. To display files in a folder, select the folder and press the Enter key.   Press the Scroll key and highlight the USB drive and press “select or de-select” soft key in the lower window using the touch screen or the Up/Down arrow keys or Thumb Wheel. NOTE: The Scroll submenu key toggles between Src (top window) and Dst (bottom window). Basically, the top window (src) is where you copy from and the bottom (dst) is where those files are going to.   Press the Copy key to copy the files to the flash drive.       NOTE:   If you want to check and see if those files have been copied, simply press the Scroll soft key (to get to your Src or source box), use your Up/Down arrows or Thumb Wheel to get to your USB Drive and press “Enter”. 

How do I copy files from my internal memory to my USB memory stick?

The steps below detail copying a file from internal memory to an external flash drive. NOTE: Select the files to copy in the top window and the location for the files to be copied to in the bottom window. Insert a USB drive into either USB Type A port of the Site Master. From the File main (shift/file (#7 key)) menu, press the “Copy (soft key)” submenu key. The Copy submenu and Copy dialog box are displayed (picture below). Select the file(s) to copy. To select multiple files, highlight the first then press the “Select or De-Select” key to keep the file selected. NOTE: (Press again to de-select if you choose not to copy the file.) The file will be outlined in blue. Repeat with all the files to copy. To display files in a folder, select the folder and press the Enter key. Press the Scroll key and highlight the USB drive and press “select or de-select” soft key in the lower window using the touch screen or the Up/Down arrow keys or Thumb Wheel. NOTE: The Scroll submenu key toggles between Src (top window) and Dst (bottom window). Basically, the top window (src) is where you copy from and the bottom (dst) is where those files are going to. Press the Copy key to copy the files to the flash drive. NOTE: If you want to check and see if those files have been copied, simply press the Scroll soft key (to get to your Src or source box), use your Up/Down arrows or Thumb Wheel to get to your USB Drive and press “Enter”.

Is there a rack mount kit available for handheld instruments?

There is a rack mount kit available for current models of handheld instruments. The part number is 66864. This kit can be used with the following models: S331E, S332E, S361E, S362E, MT8221B, MT8222B, MT8212E, MT8213E, S412E, MS2024B, MS2025B, MS2034B, MS2035B, MS2026C, MS2028C, MS2036C, MS2038C, MS2722C, MS2723C, MS2724C, MS2725C, MS2726C, MS2711E, MS2712E, MS2713E, and MS2721B

How do I add options to my S331D Site Master?

Some options for the S331D Site Master require additional hardware or calibration factors to be loaded into the unit so the work needs to be done in either an Anritsu service center or at the Morgan Hill, CA facility.  For other options, these can be added via a license file and instructions on how to complete this process are shown below:    Generating an Instrument Config File and Installing A New License File To automatically queue the Anritsu website for updates, you must configure the Master Software Tools (MST) Internet Settings. 1. Run the MST program. 2. Connect to the instrument. 3. Generate a Config File a. Pull down the Sync menu and highlight Device Status and Options to open the submenu.   Get Options Highlighted (config file)   b. Click Get Options (Config File). The Save Config File window opens.     c. Go to the folder where the license file was previously stored. d. Highlight the file and press the Open button. The filename format is model-spaceserialnumber.license. e. MST will install the new license into the instrument. After the installation is complete, a dialog appears.   “Instrument options successfully upgraded. Cycle power on the instrument to begin using the new features”   f. Follow the instruction. g. Verify the new option(s) are listed on the boot up screen.

On my MS272xC it seems to take a very long time for the GPS to lock. Is there anything that can be done to improve it?

Yes. Change the default GPS voltage from 3.3 Volts to 5 Volts. The default output voltage that powers the preamplifier in the GPS antenna is set to 3.3 volts to avoid the possibility of damaging an antenna that needs that voltage. However, the antennas sold with the MS272xC are designed to run on 5 volts. You can choose which voltage the instrument puts out by pressing | Shift | System | GPS| and making sure that 5 volts is underlined.

Where can I find information on how to erase my product's memory?

Please contact your Sales Representative or Technical Support at 1-800-ANRITSU (1-800-267-4878) for memory erasure /letter of volatility information.
Products
Technologies
Products by Category
Educational Blogs
Video Gallery
Industries
Discontinued Models
Buy
Request a Quote
Order Tracking
Used Test Equipment
Promotions
Channel Partners
Contact Sales Office
Support
Repair and Calibration
Replacement Parts
Training and Education
Submit Technical Question
Download Center
Talk To Anritsu
FAQS
About Anritsu
News
Corporate Information
Employment
Investor Relations
ISO17025
Sustainability
Anritsu World Wide
Sitemap Privacy Policy Terms of Use

Copyright 2023
Select a country/region