Rejector Systems
With over 50 years’ experience in the design and manufacture of inspection and detection equipment, we provide
the best solutions that suit our customers' needs.
It is common to place a rejector system after an inspection system at the food facility for the below reasons.
1. Prevent the production downtime from stopping the line when the error occurs.
2. Prevent a careless mistake (put back defective products to the line) by an operator.
Flipper Type
The most common type of rejector is the flipper. NG products are pushed aside by the rejector gates (arms). It is
ideal for products in boxes and thick bags.
Introduction video: Flipper type >
Dropout Type
The rejection conveyor drops down to reject NG products. It is ideal for products in thin bags.
Introduction video: Dropout Type >
Up and Out Type
The rejection conveyor flips up so that the NG product drops out of the line. It is suitable for products in thin
bags.
Introduction video: Up and Out Type >
Air Jet Type
NG products are blown sideways off of the line by a powerful blast of air. It is ideal for small, lightweight
packaged products at high speed.
Introduction video: Air Jet Type >
Trip Type
In this unusual belt method, NG products are carried off either left or right by belts running crosswise to the
product flow. It is suitable for rejecting large packaged products.
Pusher Type
NG products are pushed off the line sideways by the action of a gate attached to an air cylinder. It is suitable for
rejecting products in packages and thick bags.
Introduction video: Pusher Type >
Turning Type
This method uses a turning gate to reject NG products. It is suitable for rejecting products in large packages and in
thick bags at comparatively highspeed.
Carrier Type
NG products are sorted horizontally without any shock due to rejection. Since the rejection process doesn't cause any
damage, it is ideal for fragile products.
Introduction video:Carrier Type >
Chute Type
Rejected products fall when the chute is reversed. It is ideal for rejecting relatively light bulk products.
Introduction
video: Chute Type >
Shuttle Type
The conveyor on the rejector slides to let the rejected products fall during the rejection. It is ideal for
unpackaged animal products and sticky bulk products.
Introduction
video: Shuttle Type >
