Skip to main content

Test and Measurement

5G Fronthaul Challenges Download Anritsu Whitepaper
Is Your Network Ready for 5G? Get New White Paper!
Download “1914.3 (RoE) eCPRI Transport” Paper
Learn the importance of upgrading test equipment to meet new requirements and testing during network I&M to ensure the end-user expected transport network reliability and uptime.
Anritsu
Precision Components. Precision Measurements.
Anritsu’s metrology-grade coaxial W1 components deliver precision performance and repeatability
Anritsu offers the largest line of W1 (1.0 mm) coaxial components addressing mmWave applications. Providing frequency coverage from near DC-110 GHz, these components do not need waveguide interfaces and improve repeatability of measurements. Save on setup time and complexity by connecting directly to W1 (1.0 mm) test ports.
Solving PCIe Testing Challenges
Solving PCIe Testing Challenges
Read our new white paper
PCIe 5.0 operates at 32 GT/s with NRZ signaling, a huge challenge. With 36 dB of loss, CTLE and DFE at the receiver coordinate with Transmitter FFE—called “link training”—to open eye diagrams 10 mV. This paper describes the technology and guides you through the crucial SerDes tests.
5G Anritsu
Technologies
Understanding 5G
Review the technology and use cases that are driving the future of mobile broadband networks, and derive from here a set of future requirements. We will then look at the key technical challenges and some of the research subjects that are addressing these. Examples of this include Cloud- RAN, massive MIMO, mmW access, and new air interface waveforms optimized for HetNet and super-dense networks.
ME7868A
Shockingly Powerful
Conduct full vector S-parameter measurements over wide distances of 100+ meters
Powered by PhaseLync™ synchronization, the ShockLine ME7868A system synchronizes two portable ShockLine MS46131As allowing engineers to connect them directly to a DUT. Conduct vector transmission measurements over distances of 100+ meters, eliminate long cable runs, and improve dynamic range and measurement stability of S-parameter measurements – all at a lower cost.

10/26/2020 - 10/27/2020

TradeShow

PCI-SIG® Fall DevCon 2020 - VIRTUAL

10/6/2020

Webinar

Material Measurements with VNAs

More

Products

Bit Error Rate Testers (BERT)/Oscilloscope

Bit Error Rate Testers (BERT)/Oscilloscope

Anritsu provides accurate, reliable, and easy-to-use inline components to continually verify signal strength, power, and throughput, as well as external test instruments that can quickly isolate a bad connection or failed component.

Mobile/Wireless Communications Measuring Instruments

Mobile Wireless Communications

Anritsu’s mobile and wireless communications test solutions enable the development, production, installation, and maintenance of current and next-generation mobile/wireless technologies that meet the full range of 3GPP, 3GPP2, and IEEE standards.

Optical Measuring Instruments

Anritsu’s test and measurement equipment for the optical communications industry maximize network performance by conducting critical measurements such as OTDR, chromatic dispersion, polarization mode dispersion, loss test set, and optical return loss.

RF Microwave Measuring Instruments

Anritsu offers a variety of solutions including power analyzers and power meters with thermal sensors, diodes sensors, and pulse sensors. These solutions enable fast and accurate measurements of RF power on CW, modulated, and pulsed signals to 110 GHz.

Signal Generators

Signal Generators

Anritsu solutions are ideal for the telecommunications, microwave, mobile satellite communications, or defense industries. High-performance specifications coupled with easy-to-use interfaces ensure best-in-class performance and fast, accurate measurements.

Signal/Spectrum Analyzers

Anritsu offers a wide range of industry-leading signal/spectrum analyzers that provide coverage from 50 kHz to 170 GHz, with optional coverage to 325 GHz with an external mixing solution - delivering outstanding performance and accuracy at a low price.

Transport and Ethernet Testing

Transport and Ethernet Testing

For networks using IP, Ethernet, MPLS, SONET, SDH, DWDM, ATM, ISDN, SS7, VoIP, PDH, or DSn technologies, as well as future systems up to 43.5 Gbps, Anritsu provides a range of measurement instruments for bit error rate (BER), frame, and protocol testing.

Vector Network Analyzers

Vector Network Analyzers

Anritsu VNAs provide leading solutions for the RF and microwave frequencies, 50 kHz to 145 GHz, as well as banded solutions up to 1.1 THz. Leveraging patented NLTL technology, they are ideal for characterizing and making high-performance measurements.

Discontinued Models

ctgy-bnr-discontinued-models

Anritsu Test and Measurement solutions are designed for various electronics and communications applications and markets, including all of the telecommunications markets: mobile wireless and wire-line, RF and microwave, broadcasting and multimedia.