Skip to main content

Download Center

Search by product Model Number

By Document Type

Anritsu's RF and Microwave Test and Measurement Solutions Product Brochure

Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800

Brochure pdf 17.9 MB Version: W 5/27/2020

E-Series Handheld Instruments Programming Manual

This SCPI Programming Manual provides information for remote operation of the E series instruments using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00256

Programming Manual pdf 4.9 MB Version: W 5/27/2020

Cell Master MT8213E Quick Fact Sheet

Quick overview of the features, key specifications, and options. P/N: 11410-00635

Brochure pdf 965.5 KB Version: E 5/26/2020

Cell Master MT8213E Technical Data Sheet

Cell Master handheld Base Station Analyzer is designed to use in the installation and maintenance of wireless networks. Designed as a lightweight base station analyzer meeting virtually all the testing needs of an RF technician, the Cell Master features Signal Analyzer options for 2G, 3G, and 4G cellular networks including LTE, WiMAX, and digital broadcast. P/N: 11410-00485

Datasheet pdf 5.8 MB Version: AV 5/13/2020

ElectroMagnetic Field Measurements Product Brochure

ElectroMagnetic Field (EMF) Measurement System is designed to measure radiation compliance with various national standards for personal safety set by governmental regulatory authorities. Many countries have mandated EMF safety testing in areas where cellular or other high power transmission antennas are located. The EMF option is primarily targeted to both cellular operators and government regulators. Additionally, contractors and small service companies perform building inspections and field surveys to monitor radiation exposure intensities in areas situated near transmission antennas. P/N: 11410-00838

Brochure pdf 4.7 MB Version: F 5/5/2020

Cell Master MT8212E and MT8213E User Guide

The Cell Master User Guide is part of a set of manuals that describe all of the instrument functions and their use. This manual covers the instrument overview, system functions and other common features, along with a brief guide to basic measurement concepts and setups. P/N: 10580-00250

User Guide pdf 11.7 MB Version: AA 4/28/2020

Spectrum Analyzer Measurement Guide

This Measurement Guide describes the test and measurement functions of Anritsu RF and Microwave Handheld Instruments. Basic spectrum analyzer functions are included with most Anritsu handheld instruments. P/N: 10580-00349

Measurement Guide pdf 21.8 MB Version: P 4/28/2020

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

Catalog pdf 12.2 MB Version: W 2/7/2020

Power Meter Measurement Guide

This Measurement Guide documents the Power Meter and the High Accuracy Power Meter for the following Anritsu instruments: BTS Master, Site Master, Spectrum Master, and Cell Master. P/N: 10580-00240

Measurement Guide pdf 2.7 MB Version: J 1/16/2020

Cable and Antenna Analyzer Measurement Guide

The Site Master, Cell Master, and PIM Master (MW82119B with Option 331) offer a wide range of cable and antenna measurements: Return Loss, VSWR, Cable Loss, Distance-To-Fault RL, Distance-To-Fault VSWR, 1-Port Phase, and Smith Chart. This manual provides setup and measurement procedures for each measurement. It also includes a line sweep fundamentals overview section. P/N: 10580-00241

Measurement Guide pdf 3.0 MB Version: E 1/16/2020

WiMAX Signal Analyzer for Anritsu RF and Microwave Handheld Instruments

This Measurement Guide documents WiMAX signal analysis for the BTS Master, Cell Master, LMR Master, and the Spectrum Master. P/N: 10580-00236

Measurement Guide pdf 9.9 MB Version: F 1/16/2020

Backhaul Analyzer Measurement Guide

This Measurement Guide documents E1 (Option 52 or 55), OC-3c (Option 58), STM-1 (Option 59), T1/FT1 (Option 51 or 54), and T1/T3 (Option 53) backhaul measurements for the BTS Master, Cell Master, and BTS Master MT8221B with Option 450. P/N: 10580-00238

Measurement Guide pdf 4.6 MB Version: E 1/16/2020

3GPP Signal Analyzer Measurement Guide

This Measurement Guide documents 3GPP signal analysis for the following Anritsu instruments: BTS Master, Cell Master, Spectrum Master, and LMR Master. P/N: 10580-00234

Measurement Guide pdf 19.9 MB Version: AE 1/16/2020

3GPP2 Signal Analyzer Measurement Guide

This Measurement Guide documents 3GPP2 signal analysis for the BTS Master, Cell Master, and Spectrum Master. P/N: 10580-00235

Measurement Guide pdf 3.4 MB Version: F 1/16/2020

Digital Television Signal Analyzer Measurement Guide

This Measurement Guide documents the Digital Television Signal Analyzer (DTV) measurement options for Anritsu handheld instruments. P/N: 10580-00237

Measurement Guide pdf 19.2 MB Version: F 1/16/2020

CPRI RF Analyzer and BBU Emulator Measurement Guide

This measurement guide describes the Common Public Radio Interface (CPRI) analyzer test and measurement functions of Anritsu RF and Microwave Handheld Instruments. P/N: 10580-00415

Measurement Guide pdf 10.6 MB Version: L 1/16/2020

Open Base Station Architecture Initiative (OBSAI) RF Analyzer Measurement Guide

This measurement guide describes the OBSAI (Open Base Station Architecture Initiative) Analyzer test and measurement functions of Anritsu RF and Microwave Handheld Instruments. P/N: 10580-00434

Measurement Guide pdf 5.5 MB Version: B 1/16/2020

Electromagnetic Field (EMF) Measurements Option 444 Measurement Guide

This Measurement Guide describes Electromagnetic Field (EMF) measurement functions available as Option 444 on Anritsu RF and Microwave Handheld Instruments. Option 444 must be used in conjunction with an Anritsu isotropic antenna, at a frequency range that is within specification of the instrument and antenna used. P/N: 10580-00455

Measurement Guide pdf 3.1 MB Version: B 1/16/2020

2-Port Transmission Measurement Guide

This Measurement Guide documents 2-port Transmission Measurement (Option 21) and Bias Tee (Option 10) for the Site Master, Spectrum Master, and Cell Master. P/N: 10580-00242

Measurement Guide pdf 1.9 MB Version: E 1/16/2020

Product Information, Compliance, and Safety for Anritsu Handheld Instruments

This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the equipment. P/N: 10100-00065

Datasheet pdf 1.4 MB Version: D 1/15/2020

By Document Type

Firmware Update for the Cell Master MT821xE

This firmware update contains the latest upgrades for the Cell Master MT8212E and MT8213E. Once downloaded, run the file on your computer to see the installation instructions.

Drivers Software Downloads exe 75.1 MB Version: 3.90 5/22/2020

Firmware Revision History for the MS271xE and MT821xE

Firmware release history for the Spectrum Master MS2711E, MS2712E and MS2713E handheld spectrum analyzer Family. Also includes the history for the Cell Master MT8212E and MT8213E

Drivers Software Downloads pdf 822.8 KB Version: 3.90 5/22/2020

Anritsu Software Tool Box (Full Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer may not require internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools. This stand-alone installer will download all Anritsu software needed to install your chosen PC Tools software, and do so all in one file. This is ideal if you will be doing the installation on a computer without internet access. Windows 7, Windows 8 or Windows 10 computers may still need internet access to download the Microsoft .NET 3.5 suite of support files.

Drivers Software Downloads exe 388.8 MB Version: 1.18 4/10/2019

Anritsu Software Tool Box (Web Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer requires internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools.

Drivers Software Downloads exe 401.0 KB Version: 1.09 1/9/2018

LTE PIM Alert for MS2712E/13E, MT821xE, & S3x2E

This PIM Alert application uses the built in Spectrum Analyzer to check the Uplink Band of mobile carriers for the possibility of PIM (Passive Intermodulation).

Before installing PIM Alert, make sure the Anritsu instrument has the latest firmware and shows the easyTest icon on the Menu screen.

Drivers Software Downloads ett 308.2 KB 6/14/2016

UMTS PIM Alert for MS2712E/13E, MT821xE, & S3x2E

This PIM Alert application uses the built in Spectrum Analyzer to check the Uplink Band of mobile carriers for the possibility of PIM (Passive Intermodulation).

Before installing PIM Alert, make sure the Anritsu instrument has the latest firmware and shows the easyTest icon on the Menu screen.

Drivers Software Downloads ett 374.6 KB 6/14/2016

CDMA PIM Alert for MS2712E/13E, MT821xE, & S3x2E

This PIM Alert application uses the built in Spectrum Analyzer to check the Uplink Band of mobile carriers for the possibility of PIM (Passive Intermodulation).

Before installing PIM Alert, make sure the Anritsu instrument has the latest firmware and shows the easyTest icon on the Menu screen.

Drivers Software Downloads ett 374.7 KB 6/14/2016

Updating Anritsu Handheld Instrument Firmware

This document provides an overview of the firmware update process. For further details, please refer to the user guide for your Anritsu handheld instrument.

Drivers Software Downloads pdf 344.1 KB 10/30/2015

By Product Category

How many satellites does the Cell Master try to synchronize with?

The Cell Master can synchronize with up to 12 satellites.

I saved my measurements as a JPEG and a .DAT file. How do I view them on my S332E?

Currently the instrument is only able to create these files, not view them.  However, you can see some text information in the instrument through the “Copy or Delete” functionality such as the title accompanied with the extension (.JPG or .DAT).   JPEGs will have to be opened on your computer. DAT files can be opened with Line Sweep Tools or Hand Held Software Tools.  

 

How do I copy files from my internal memory to my USB memory stick?

The steps below detail copying a file from internal memory to an external flash drive.

NOTE:

Select the files to copy in the top window and the location for the files to be copied to in the bottom window.

Insert a USB drive into either USB Type A port of the Site Master.

From the File main (shift/file (#7 key)) menu, press the “Copy (soft key)” submenu key. The Copy submenu and Copy dialog box are displayed (picture below).

Select the file(s) to copy. To select multiple files, highlight the first then press the “Select or De-Select” key to keep the file selected. NOTE: (Press again to de-select if you choose not to copy the file.) The file will be outlined in blue. Repeat with all the files to copy. To display files in a folder, select the folder and press the Enter key.

Press the Scroll key and highlight the USB drive and press “select or de-select” soft key in the lower window using the touch screen or the Up/Down arrow keys or Thumb Wheel. NOTE: The Scroll submenu key toggles between Src (top window) and Dst (bottom window). Basically, the top window (src) is where you copy from and the bottom (dst) is where those files are going to.

Press the Copy key to copy the files to the flash drive.

NOTE: If you want to check and see if those files have been copied, simply press the Scroll soft key (to get to your Src or source box), use your Up/Down arrows or Thumb Wheel to get to your USB Drive and press “Enter”.

Where can I find information on how to erase my product's memory?

Please contact your Sales Representative or Technical Support at 1-800-ANRITSU (1-800-267-4878) for memory erasure /letter of volatility information.