Skip to main content

Download Center

Search by product Model Number

By Document Type

Installation, Maintenance and Optimization Solutions Leaflet

A small 2 page flyer to showcase the right tools needed to achieve best in class network reliability. P/N: 11410-00855

Leaflet pdf 1.3 MB Version: F 7/16/2019

Installation, Maintenance and Optimization Solutions Brochure

Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class. P/N: 11410-00617

Brochure pdf 1.6 MB Version: F 7/16/2019

Anritsu Signal Analyzers/Spectrum Analyzers

Solve all your measurement needs with Anritsu's wide line-up of signal and spectrum analyzers, ranging from high-performance and multi-function, high-end models for R&D to handheld types for field use.

Selection Guide pdf 2.9 MB 6/28/2019

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

Catalog pdf 12.3 MB Version: T 6/5/2019

E-Series Handheld Instruments Programming Manual

This SCPI Programming Manual provides information for remote operation of the E series instruments using commands sent from an external controller via Ethernet or USB connection. P/N: 10580-00256

Programming Manual pdf 4.6 MB Version: V 5/1/2019

Spectrum Master MS2712E and MS2713E Technical Data Sheet

These compact handheld Spectrum Analyzers are designed to meet the needs for portability. Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements. P/N: 11410-00511

Datasheet pdf 5.5 MB Version: AP 5/1/2019

CPRI RF Analyzer and BBU Emulator Measurement Guide

This measurement guide describes the Common Public Radio Interface (CPRI) analyzer test and measurement functions of Anritsu RF and Microwave Handheld Instruments. P/N: 10580-00415

Measurement Guide pdf 10.6 MB Version: K 5/1/2019

Digital Broadcast Analysis Options Technical Data Sheet

Anritsu's compact handheld Cell Master and Spectrum Master products can now be configured with a full suite of digital broadcast analysis options for both ISDB-T/ISDB-Tmm and DVB-T/H technologies and provide the broadcast professional the performance needed for the most demanding measurements in harsh RF and physical environments. Whether it is for spectrum monitoring, broadcast proofing, transmitter acceptance, or regulatory compliance, the Cell Master and Spectrum Master are ideal instruments for making fast and reliable measurements. P/N: 11410-00624

Datasheet pdf 3.3 MB Version: B 5/1/2019

Base Station Analysis Solutions Leaflet

This comparison chart offers a quick overview of the different tests to perform and which analyzer to use to perform those tests. P/N: 11410-00555

Leaflet pdf 644.2 KB Version: E 4/3/2019

Spectrum Analysis Solutions Leaflet

Compare models with spectrum analysis and review the different tests they can perform. P/N: 11410-00559

Leaflet pdf 1,007.6 KB Version: H 4/3/2019

3GPP Signal Analyzer Measurement Guide

This Measurement Guide documents 3GPP signal analysis for the following Anritsu instruments: BTS Master, Cell Master, Spectrum Master, and LMR Master. P/N: 10580-00234

Measurement Guide pdf 21.7 MB Version: AD 1/31/2019

Spectrum Master MS2712E and MS2713E Quick Fact Sheet

This quick 2 page overview highlights the key specifications, accessories, and available options. P/N: 11410-00628

Brochure pdf 4.3 MB Version: F 1/7/2019

Spectrum Master MS2712E and MS2713E Product Brochure

The Spectrum Master was designed specifically for field environments. Weighing less than 3.45 kg, it is small compact and easy to carry. Its field replaceable Li-Ion battery typically lasts for more than 3 hours, and a new bright 8.4-inch color display provides visibility even in broad daylight. With an operating temperature range from -10 °C to 55 °C, a rugged case and splash proof design, the Spectrum Master works in the most extreme weather conditions with guaranteed performance anywhere and anytime. P/N: 11410-00518

Brochure pdf 29.5 MB Version: N 1/7/2019

Spectrum Master MS2712E and MS2713E User Guide

The Spectrum Master User Guide is part of a set of manuals that describe all of the instrument functions and their use. This manual covers the instrument overview, system functions and other common features, along with a brief guide to basic measurement concepts and setups. P/N: 10580-00251

User Guide pdf 10.2 MB Version: AB 12/20/2018

Electromagnetic Field (EMF) Measurements Option 444 Measurement Guide

This Measurement Guide describes Electromagnetic Field (EMF) measurement functions available as Option 444 on Anritsu RF and Microwave Handheld Instruments. Option 444 must be used in conjunction with an Anritsu isotropic antenna, at a frequency range that is within specification of the instrument and antenna used. P/N: 10580-00455

Measurement Guide pdf 3.6 MB Version: A 12/20/2018

Anritsu RF and Microwave Handheld Analyzers Solution Poster

Poster showcasing the RF and Microwave Handheld analyzers options. Features Cable and Antenna Analyzers, Base Station Analyzers, Spectrum Analyzers, Vector Network Analyzers, and PIM Analyzers. P/N: 11410-00571

Brochure pdf 262.8 KB Version: P 4/24/2018

Spectrum Analyzer Measurement Guide

This Measurement Guide describes the test and measurement functions of Anritsu RF and Microwave Handheld Instruments. Basic spectrum analyzer functions are included with most Anritsu handheld instruments.

Measurement Guide pdf 21.6 MB Version: M 3/30/2018

Understanding IBW In-Building Wireless: DAS to Small Cells Application Note

The purpose of an in-building wireless (IBW) system is to provide enhanced network coverage and/or capacity when the existing macro network is not able to adequately service the demand. Coverage may be poor due to high penetration losses caused by the building structure or due to low emissivity glass installed to improve the thermal performance of the building. In dense urban environments, adjacent buildings may create an RF barrier that blocks coverage from nearby macro sites. Tall buildings typically have poor coverage on upper floors since macro site antennas, many floors below, are specifically designed to suppress energy radiating above the horizon. Capacity may be an issue in venues such as stadiums, coliseums and convention centers where many thousands of users may be trying to simultaneously access the network.

Application Note pdf 1.8 MB Version: C 3/28/2018

Spectrum Master MS2712E and MS2713E Help

This guide provides important notices, warranty, safety, and regulatory compliance information for the MS2712E and MS2713E Spectrum Master. Be sure to read these important notices before operating the equipment.

Online Help System htm 185.8 KB Version: H 11/21/2017

3GPP2 Signal Analyzer Measurement Guide

This Measurement Guide documents 3GPP2 signal analysis for the BTS Master, Cell Master, and Spectrum Master.

Measurement Guide pdf 3.3 MB Version: E 11/15/2017

By Document Type

Firmware Update for the Spectrum Master MS271xE

This firmware update contains the latest upgrades for the Spectrum Master MS2711E, MS2712E, and the MS2713E. Once downloaded, run the file on your computer to see the installation instructions.

Drivers Software Downloads exe 75.0 MB Version: 3.50 5/15/2019

Firmware Revision History for the MS271xE and MT821xE

Firmware release history for the Spectrum Master MS2711E, MS2712E and MS2713E handheld spectrum analyzer Family. Also includes the history for the Cell Master MT8212E and MT8213E

Drivers Software Downloads pdf 940.3 KB Version: 3.50 5/15/2019

Anritsu Software Tool Box (Full Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer may not require internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools. This stand-alone installer will download all Anritsu software needed to install your chosen PC Tools software, and do so all in one file. This is ideal if you will be doing the installation on a computer without internet access. Windows 7, Windows 8 or Windows 10 computers may still need internet access to download the Microsoft .NET 3.5 suite of support files.

Drivers Software Downloads exe 388.8 MB Version: 1.18 4/10/2019

Anritsu Software Tool Box (Web Installer)

The Anritsu Software Tool Box contains tools to help you make the most of your Anritsu RF Handheld Instruments. This installer requires internet access while running. See the software tools pages for details. Anritsu Software Tool Box includes Line Sweep Tools, Master Software Tools, Wireless Remote Tools, easyTest Tools, and easyMap Tools.

Drivers Software Downloads exe 401.0 KB Version: 1.09 1/9/2018

LTE PIM Alert for MS2712E/13E, MT821xE, & S3x2E

This PIM Alert application uses the built in Spectrum Analyzer to check the Uplink Band of mobile carriers for the possibility of PIM (Passive Intermodulation).

Before installing PIM Alert, make sure the Anritsu instrument has the latest firmware and shows the easyTest icon on the Menu screen.

Drivers Software Downloads ett 308.2 KB 6/14/2016

UMTS PIM Alert for MS2712E/13E, MT821xE, & S3x2E

This PIM Alert application uses the built in Spectrum Analyzer to check the Uplink Band of mobile carriers for the possibility of PIM (Passive Intermodulation).

Before installing PIM Alert, make sure the Anritsu instrument has the latest firmware and shows the easyTest icon on the Menu screen.

Drivers Software Downloads ett 374.6 KB 6/14/2016

CDMA PIM Alert for MS2712E/13E, MT821xE, & S3x2E

This PIM Alert application uses the built in Spectrum Analyzer to check the Uplink Band of mobile carriers for the possibility of PIM (Passive Intermodulation).

Before installing PIM Alert, make sure the Anritsu instrument has the latest firmware and shows the easyTest icon on the Menu screen.

Drivers Software Downloads ett 374.7 KB 6/14/2016

Updating Anritsu Handheld Instrument Firmware

This document provides an overview of the firmware update process. For further details, please refer to the user guide for your Anritsu handheld instrument.

Drivers Software Downloads pdf 344.1 KB 10/30/2015

By Product Category

How do I copy files from my internal memory to my USB memory stick?

The steps below detail copying a file from internal memory to an external flash drive.

NOTE:

Select the files to copy in the top window and the location for the files to be copied to in the bottom window.

Insert a USB drive into either USB Type A port of the Site Master.

From the File main (shift/file (#7 key)) menu, press the “Copy (soft key)” submenu key. The Copy submenu and Copy dialog box are displayed (picture below).

Select the file(s) to copy. To select multiple files, highlight the first then press the “Select or De-Select” key to keep the file selected. NOTE: (Press again to de-select if you choose not to copy the file.) The file will be outlined in blue. Repeat with all the files to copy. To display files in a folder, select the folder and press the Enter key.

Press the Scroll key and highlight the USB drive and press “select or de-select” soft key in the lower window using the touch screen or the Up/Down arrow keys or Thumb Wheel. NOTE: The Scroll submenu key toggles between Src (top window) and Dst (bottom window). Basically, the top window (src) is where you copy from and the bottom (dst) is where those files are going to.

Press the Copy key to copy the files to the flash drive.

NOTE: If you want to check and see if those files have been copied, simply press the Scroll soft key (to get to your Src or source box), use your Up/Down arrows or Thumb Wheel to get to your USB Drive and press “Enter”.

Where can I find information on how to erase my product's memory?

Please contact your Sales Representative or Technical Support at 1-800-ANRITSU (1-800-267-4878) for memory erasure /letter of volatility information.