To meet demand for additional bandwidth for cellular and broadcast operations, national regulators are reallocating spectrum previously used for other applications. Before a new network can be rolled out within these frequencies, it is critical for the new license owner to confirm that all legacy users have terminated their transmissions. P/N: 11410-01154
To communicate with the MS2710xA Remote Spectrum Monitor or to change its IP configuration, a PC must be correctly set up to communicate with the instrument via a direct connection using a static IP. This guide explains how to set this up. P/N: 10580-00414
Quick Start Guide
Download the complete user guide for the MS2710xA family of Remote Spectrum Monitors. Chapters include Graphical User Interface, How to, and Programming with SCPI. P/N: 10580-00419
There are various methods for geo-locating an RF signal of interest. Primary alternatives include Power of Arrival (POA), Time Difference of Arrival (TDOA), and Angle of Arrival (AOA). In most situations where modulated signal bandwidths are greater than 25 kHz, TDOA provides the best accuracy. This application note focuses on the use of TDOA as a means for tracking a signal. P/N: 11410-01133
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
The Anritsu platform of spectrum monitors provides high performance real-time monitoring of the radio spectrum. Designed to be stable over time under continuous operation, the MS27101A monitor provides superior sweep speeds, high dynamic range, and low spurious levels for fast and accurate measurements. Applications include monitoring for interference, white space analysis, unlicensed transmission discovery, and signal coverage. P/N: 11410-00853
A quick overview of the 9 kHz to 6 GHz Remote Spectrum Monitor for remote RF signal monitoring. Includes features, key specifications, and available options. Small form factor designed for remote applications. P/N: 11410-01084
With the large increase in mobile data traffic, network operators are moving the BBU (BaseBand Units) from macro cell sites to a common central location allowing greater flexibility and cost savings. The connection from the BBU to the RRH (Remote Radio Head) is most commonly via CPRI at rates between 614.4 kbps to 10,137.6 Mbps. P/N: 11410-00927
The ideal combination for indoor and outdoor, multi-frequency radio coverage mapping measurements. This application note explains how to build and use a radio frequency coverage mapping test system utilizing Anritsu's Remote Spectrum Monitor MS27101A, Vision MX280001A software, and NEON Signal Mapper MA8100A solutions. P/N: 11410-01096
SpectraVision is a suite of software options and tools used with Anritsu’s MS2710XA product line of spectrum monitors. SpectraVision is a highly modular software system covering the entire frequency range of Anritsu's
Remote Spectrum Monitors. Various features incorporated into the software allow users to quickly perform automated analyses of the frequency spectrum, record measurements and generate optional reports detailing
signal quality and performance characteristics. P/N: 11410-00960
This documentation provides a description of the Anritsu Remote Spectrum Monitor MS2710xA software. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses SCPI programing, and covers a lists of SCPI programming commands. P/N: 10450-00052
Online Help System
Transport, Optical & RF Testing for all Elements of the C-RAN Network.
Anritsu has a long history of testing all aspects of the C-RAN. Our instruments evolve to meet the new challenges of testing the C-RAN
networks being rolled out today. Put our experience to work for you!
The purpose of an in-building wireless (IBW) system is to provide enhanced network coverage
and/or capacity when the existing macro network is not able to adequately service the
demand. Coverage may be poor due to high penetration losses caused by the building
structure or due to low emissivity glass installed to improve the thermal performance of the building. In dense urban environments, adjacent buildings may create an RF barrier that blocks coverage from nearby macro sites. Tall buildings typically have poor coverage on
upper floors since macro site antennas, many floors below, are specifically designed to
suppress energy radiating above the horizon. Capacity may be an issue in venues such as
stadiums, coliseums and convention centers where many thousands of users may be trying to
simultaneously access the network.
This solution brochure covers the four steps to success when interference hunting, as well as which Anritsu product/solution is suitable for each step in the process. P/N: 11410-00900
Capable of sweeping at rates up to 24 GHz per second, the MS27101A allows capture of many types of signals. This includes periodic or transient transmissions as well as short "bursty" signals. Also featured is a high dynamic range, high sensitivity and low spurious signals. This enables the MS27101A to reliably distinguish between low-level signals being observed and those signals generated by the monitor itself. P/N: 11410-00902
This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu MS2710xA series remote spectrum monitors. P/N: 10100-00064
This documentation provides a description of the Anritsu’s Remote Spectrum Monitor (RSM) and Vision Software API’s. It describes the graphical user interface, provides a how-to chapter to set up measurements, discusses API programing, and covers a lists of API programming commands. API's are presented both for control of Anritsu's RSM hardware product line (MS2710XA) as well as for Vision software. Most features in Vision are paid options. In order for these options to work, the RSM hardware must have these options
enabled. Please see the Vision software Product Brochure and User Guide for option information.
Positive Train Control (PTC) is an advanced communications system to minimize train accidents by automatically controlling train activity. This includes real-time monitoring of static and dynamic conditions that require the train to slow or stop.
Clifton Weiss & Associates, Inc. (CWA) was retained as professional consulting engineers to conduct a 3-year study of interfering RF signals on an actively operating Northeast commuter railway.
The Case Study talks about and discusses the challenges and solutions.
This manual provides maintenance instructions for Anritsu Remote Spectrum Monitor, Models MS27101A, MS27102A and MS27103A.
This Quick Start Guide provides the installation instructions and exercises that illustrate the use of Vision Remote Spectrum Monitor Software.
Quick Start Guide