Skip to main content

Download Center

Search by product Model Number

By Document Type

BERTWave™ MP2100B

BERTWave MP2100B support 4ch BER test and fast eye pattern analysis because sampling speed is 150 ksample/s. Therefor BERTWave increases efficiency and reduces measurement costs.

Product Introduction pdf 4.0 MB 7/28/2020

BERTWave™ MP2100B

The all-in-one MP2100B BERTWave supporting simultaneous BER and eye-pattern measurements. BERTWave support 4ch simultaneous BER measurement and Scope sampling speed support 150 ksample/s. BERTWave is ideal for both R&D and manufacturing tests because it increases efficiency and reduces measurement costs.

Brochure pdf 3.4 MB 7/21/2020

BERTWave Series (MP2110A and MP2100B)

The BERTWave series is designed especially for mass-production of optical modules and features an All-in-one BERT (for bit error rate measurement) plus sampling oscilloscope (for Eye pattern analysis) to help increase optical module production efficiency and cut costs.

Brochure pdf 1.9 MB 7/21/2020

BERTWave Series Remote Control Operation Manual

BERTWave Series Remote Control Operation Manual

Operations Manual pdf 3.5 MB Version: 15th Edition 5/11/2020

Optical & High-speed & Transport Testing Solutions

Introduces Anritsu Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products. This Solution Brochure is a document for Optical Measuring Instruments, Bit Error Rate Testers (BERT), Transport and Ethernet Testing products.

Brochure pdf 4.5 MB 4/21/2020

Total Solution for Optical Module Evaluation

Total Solution for Optical Module Evaluation / reduce Inspection Times and Improves Productivity MP2100B BERTWave MS9740A Optical Spectrum Analyzer.

Leaflet pdf 660.1 KB 4/23/2019

Manufacturing and Evaluating Optical Modules and Devices - Optical Attenuators and Optical Switches

In addition to using a BERT, sampling oscilloscope and spectrum analyzer, manufacturing inspection of optical modules and devices requires optical attenuators and optical switches. Anritsu’s product line of G0350 to G0355 series optical attenuators and G0344 to G0349 series optical switches is the total solution for evaluating optical modules and optical devices.

Leaflet pdf 592.8 KB 4/23/2019

MX210001A Jitter Analysis Software Operation Manual

MX210001A Jitter Analysis Software Operation Manual

Operations Manual pdf 2.7 MB Version: Sixth Edition 3/28/2019

'Linked by Light' Evaluating Gbit/s Ultra-Fast Serial Signals

The all-in-one BERTWave MP2100B also supports Total Jitter component analysis required for developing and manufacturing AOC. The AOC interface can be evaluated during simultaneous sending and receiving to simplify evaluation of AOC characteristics and transmission-path quality.

Leaflet pdf 518.9 KB 7/23/2018

'Linked by Light' Evaluating Hi-Definition Video Transmissions

With a built-in BERT and sampling oscilloscope, the BERTWave MP2100B is the ideal, low-cost measurement solution for evaluating both the characteristics of optical transceivers and AOC, as well as transmission-path quality.

Leaflet pdf 542.7 KB 7/23/2018

Selecting Tools at Measurement of High-Speed Digital Signals

The recent rapid increases in data volumes at network equipment, servers, and storage due to increasing use of smartphones, cloud computing, FTTx rollout, video streaming, etc., seem likely to increase even further in future. To cope with demand, many appliances and facilities are using digital signals exceeding the Gbit/s band. Dealing with these high-speed signals requires paying attention not only to the digital aspects but also to analog-type behavior, and care is required in choosing tools for monitoring these signals. This document discusses the key points when handling digital signals exceeding 10 Gbit/s from the perspective of measurement tools.

Technical Note pdf 1.0 MB 7/14/2017

ESD Protection Adapter J1678A, J1679A

The Protection Adapters J1678A and J1679A are for protecting DUTs and measuring instruments against ESD/EOS and support high-reliability measurements.

Leaflet pdf 530.9 KB 7/14/2017

Measurement Environment Solutions for Eliminating ESD/EOS Failures

Electronic components of electronic devices and measurement devices break down when subjected to high voltages caused by electrostatic discharge (ESD) or electrical over-stress (EOS).Signals sent to I/O connectors of electronic, measurement and other devices must be within the rated voltage or the devices may fail. This document should be used to help build an environment that avoids ESD or EOS.

Application Note pdf 1.4 MB 3/30/2017

Ideal Remote Sequence

This note introduces standard remote sequences making use of the BERTWave functions and speed to measure optical modules and devices. The remote sequences described in this note can be used to configure a simple test system for manufacturing optical modules and devices by selecting the best commands from remote commands built into the BERTWave.

Application Note pdf 602.4 KB 2/22/2017

MP2100B BERTWave Operation Manual

MP2100B BERTWave Operation Manual

Operations Manual pdf 6.8 MB Version: Fourth Edition 2/17/2017

Jitter Analysis Software MX210001A

Simultaneous Jitter, EYE Pattern and EYE Mask Measurements

Leaflet pdf 779.4 KB 4/4/2016

Active Optical Cable (AOC) Measurement

To cope with rapid rises in data volumes, data centers are introducing active optical cable (AOC) interconnects with transmission speeds faster than 10 Gbit/s between servers. These interconnects require Eye pattern and BER measurements to assure quality while overcoming problems of longdistance transmissions, high speeds and power consumption.

Leaflet pdf 895.6 KB 4/4/2016

7.5 GHz Passive Probe Set J1512A

Ideal probe for GHz-band sampling oscilloscope, Choice of 10:1 or 20:1 attenuation ratio, Low capacity input ideal for monitoring high-speed signal waveforms, Short input ground lead ideal for high-frequency circuit evaluation.

Leaflet pdf 549.8 KB 4/4/2016

Transmission Analysis Software MX210002A

S21 Measurement, Linear Equalizer/Filter/Emphasis Waveform Simulation

Leaflet pdf 1.3 MB 4/4/2016

By Document Type

MX210000A BERTWave Software Release Note

Changed history and update procedure for BERTWave software

Drivers Software Downloads pdf 936.9 KB Version: 41th Edition 5/11/2020

MX210000A BERTWave Software for MP2100B

MX210000A for MP2100B

MD5 : 229737c44275ea6d44b4101f2e1425ef

Drivers Software Downloads exe 46.7 MB Version: 4.01.24 2/27/2020

By Product Category

No Records Found in Download Center