This explains the MP1900A series specifications.
Datasheet
pdf 2.8 MB
11/25/2019
The Signal Quality Analyzer-R MP1900A is a modular design offering optional functions for easy customization to users’ requirements. As a result, the configuration can be tailored to budget timing while the excellent expandability offers easy addition of new future functions. This Selection Guide explains the modules and options, as well as their selection conditions and possible combinations. Please use it to check the best configuration meeting the measurement needs.
Selection Guide
pdf 919.4 KB
11/25/2019
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high performance BERT with 8 slots for modules, such as a 32 Gbit/s Multi-channel PPG, ED, 32G/64G PAM4 PPG, 32G PAM4 ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.
Brochure
pdf 5.3 MB
11/25/2019
The Signal Quality Analyzer-R Series MP1900A is a high-speed BER test solution for PCI Express and high-speed device R&D.
With automation for PCIe 5.0 Base specification Rx tests, it helps resolve customers’ Physical layer measurement issues.
Support for the main real-time oscilloscope models from the three key makers helps cut initial equipment setup costs.
Leaflet
pdf 638.5 KB
11/25/2019
This document is the Operation manual of the software that controls the Signal Quality Analyzer Series.
Operations Manual
pdf 10.0 MB
Version: 8
11/18/2019
English MU195020A/MU195040A/MU195050A Operation Manual.
Operations Manual
pdf 3.5 MB
Version: 7
11/18/2019
English MP1900A Release Note.
Operations Manual
pdf 477.1 KB
Version: 24
11/18/2019
English MX183000A Release Note.
Operations Manual
pdf 480.1 KB
Version: 23
11/18/2019
English Anritsu-GRL PCIe 5.0 BASE Rx Test Application Release Note.
Operations Manual
pdf 584.2 KB
Version: 1
11/18/2019
The Signal Quality Analyzer-R MP1900A series of high-performance BER testers (BERT) is designed to measure 400GbE and future 800GbE interfaces and supports more accurate BER evaluation of PAM4 interfaces at speeds up to 116 Gbit/s using the PAM4 ED MU196040B module with industry-leading input sensitivity performance and built-in clock recovery and equalizer functions.
Leaflet
pdf 494.8 KB
10/25/2019
The Signal Quality Analyzer-R MP1900A series of high-performance BER testers (BERT) is designed to measure 400GbE and future 800GbE interfaces and supports more accurate BER evaluation of PAM4 interfaces at speeds up to 116 Gbit/s using the PAM4 ED MU196040B module with industry-leading input sensitivity performance and built-in clock recovery and equalizer functions.
Product Introduction
pdf 1.8 MB
10/25/2019
This manual describes panels and their maintenance of the MP1900A Signal Quality Analyzer.
Operations Manual
pdf 5.3 MB
Version: 7
10/25/2019
English MX183000A Operation Manual.
Operations Manual
pdf 9.8 MB
Version: 15
10/25/2019
Data center and network traffic volumes are increasing exponentially as mobile networks start upgrading to 5G and ‘Big Data’ applications become popular. As a consequence, physical-layer devices are required to support faster transmission speeds, larger data capacities, and assured signal quality, in turn making signal integrity analysis ever more important. To meet these needs, Anritsu has implemented more accurate signal integrity tests, such as bit error rate (BER) measurements, crosstalk tests, Jitter Tolerance tests, etc., in its MP1900A test solution for 32G/64G NRZ/PAM4.
Brochure
pdf 5.1 MB
10/25/2019
It provides powerful support for design testing of PAM4 devices using high-quality waveforms up to 64 Gbaud and high input sensitivity performance. Additionally, with an all-in-one architecture offering Jitter Addition, Clock Recovery, Emphasis, PAM4 Pattern Editing, and SER functions, the MP1900A is the ideal high reproducibility and easy-to-configure system for PAM4 measurements.
Leaflet
pdf 1.3 MB
10/25/2019
The Signal Quality Analyzer-R MP1900A series is a modular 8-slot high-performance BERT. Installing multiple 64G PAM4 PPG modules in the slots not only supports today’ s 400 GbE analysis requirements, but also provides futureproof support for next-generation 800G measurements.
Product Introduction
pdf 2.9 MB
10/25/2019
English MU196020A/MU196040A/MU196040B Operation Manual.
Operations Manual
pdf 2.2 MB
Version: 4
10/25/2019
Anritsu’s MP1900A BERT with pulse pattern generator (PPG) provides all-in-one support for multilane FEC pattern generation and jitter addition for 400GbE PAM4 signals. Testing is performed by generating 1- and 4-channel FEC patterns and using the DUT internal counter data for jitter tolerance tests.
Leaflet
pdf 361.4 KB
8/30/2019
English PCIe CBB Controller Installation Guide
Operations Manual
pdf 1.2 MB
Version: 1
7/16/2019
The Adjustable ISI MU196020A-040 option has a built-in Emphasis function and can generate signals emulating input/output channel loss of various high-speed devices, PC boards, cables, etc. As a result, channel-loss dependent high-speed device performance tests can be run easily with good reproducibility without needing to prototype multiple channel boards, helping cut development time.
Leaflet
pdf 693.1 KB
5/8/2019