Traffic Setting Tool (MD1230B Data Quality Analyzer, MP1590B Network Performance Tester) Leaflet
The Application Traffic Monitor function can measure microburst traffic with a resolution of 1 ms to assure the required network peak bandwidth for streaming, etc. This makes it perfect for network bandwidth design and construction as well as for performing network maintenance and management to assure there are no data dropouts. In addition to streaming, it is also ideal for guaranteeing bandwidth and network performance for voice and priority data right from the earliest stages of network and device bandwidth design.
When inserting errors at a specific error rate, the performance of FEC (Forward Error Correction) cannot be evaluated properly if errors are generated at even intervals. To correctly evaluate the performance of FEC, errors must be generated at random to create various states where errors can be corrected or where errors cannot be corrected.
Using modular plug-in units, Anritsu's MP1590B supports performance, jitter, and EOS measurements of networks, equipment and devices with SDH/SONET/OTN/PDH/DSn interfaces. The MP1590B also supports both Ethernet and IP technologies with a variety of applications such as QoS and IPTV streaming service tests.
MD1230B/MP1590B Family Ver7.1(PON/IPTV/PPPoE)
The rapid spread of broadband networks is leading to a new era of IP-network based services. One of the most important services is IP-TV using IP multicast technology. Anritsu’s MD1230B and MP1590B are general-purpose IP testers that also support QoS evaluation of multicast networks.
The spread of broadband networks is leading to a new era of IP-based networks. Previous best-effort type networks are inadequate for provision of rich-content services and guaranteed network service quality (QoS) is already an important requirement. The MD1230B and MP1590B are general-purpose IP testers that can also be used for QoS verification and evaluation.
Supports automated script creation, Batch setting without scripting
Application Note for the MP1590B Network Performance Tester
Application Note Simultaneous Measurement of up to 5,376 Channels on 10 G (STM-64/OC-192) (MP1590B Network Performance Tester)
Next Generation Networks (NGNs) require transmission equipment, such as MSPP/MSTP, supporting large capacity,QoS, and high-level functions, as well as SDH/SONET/OTN and Ethernet.
Product Introduction for the Difference between MU150110A and MU120138A 10 GbE Function (MP1590B Network Performance Tester)
Product Introduction for the New Multirate Unit (MP1590B Network Performance Tester)
This application note demonstrates the Time Verification feature of the Automatic Protection Switch (APS)available on many of Anritsu's network performance testers.
How to Verify the (Rx) Payload Data of a Frame MD1230B/MP1590B
Operation Manual for Network Performance Tester MP1590B. Free registration is required before using the download service the first time. During registration, you will be asked to identify the model and serial numbers of the products for which you would like software download access.
Leaflet for the MU150135A 10 G/10.7 G Optical Unit (XFP)
The rapid spread of broadband networks is leading to a new era of IP-network based services. One of the most important services is IP-TV using IP multicast technology.
White Paper for the FEC (Forward Error Correction) Performance Evaluation Method and Poisson Error Generator