Skip to main content

Download Center

Search by product Model Number

By Document Type

Adjusting MIMO Phase Coherence using Vector Signal Generator

This application note explains how to synchronize RF signals between multiple channels when simulating a MIMO transmitter by using Anritsu's MG3710A Vector Signal Generator.

Application Note pdf 673.4 KB 4/1/2022

MG3710A/MG3710E Vector Signal Generator MG3740A Analog Signal Generator Operation Manual

The MG3710A/MG3710E is a vector signal generator that includes an arbitrary waveform generator. It can be used for a wide range of applications, from R&D to manufacturing of digital mobile communication systems, devices, and equipment. The MG3740A is an analog signal generator. It can be used for a wide range of applications, from R&D to manufacturing of analog radio base stations, devices, and equipment.

Operations Manual pdf 23.5 MB Version: 21 3/10/2022

MX370107A Fading IQproducer Operation Manual

MX370107A Fading IQproducer is software used to read waveform patterns and generate fading-processed waveform patterns.

Operations Manual pdf 5.7 MB Version: 7 3/10/2022

DFS Radar Pattern MX370073B

Installing the DFS Radar Pattern MX370073B option in the Vector Signal Generator MG3710A/MG3710E supports output of FCC and Japan MIC standard DFS test signals. External PC not required. Simply selecting prepared waveform pattern outputs various signals using MG3710A/MG3710E built-in Sequence function. Offers 5.3-GHz band waveform patterns adopted by Japan MIC standard in July 2019

Product Introduction pdf 860.1 KB 3/8/2022

DFS (ETSI) Waveform Pattern MX370075A

Installing the MX370075A DFS (ETSI) Waveform Patterns option in the MG3710A Vector Signal Generator supports output of ETSI EN 301 893 DFS test signals. Output of complex combinations of pulse and chirp signals required to support DFS tests is made easy just by selecting combination files supplied with the MX370075A.

Product Introduction pdf 536.3 KB 3/8/2022

5 GHz Band WLAN Device DFS Tests - Support for FCC, ETSI, Japan MIC Standards

Installing the DFS Radar Patterns option MX370073B/MX370075A in the Vector Signal Generator MG3710E supports output of FCC, ETSI and Japan MIC standards DFS test signals. Output of complex combinations of pulse, chirp and hopping signals required to support DFS tests is made easy just by selecting combination files supplied with the MX370073B/MX370075A.

Leaflet pdf 940.3 KB 2/24/2022

MX370x series software - Waveform Pattern MX3700xxA / MX3710xxA

Each category contains multiple waveform pattern files each with preset parameters for each system. These default waveform patterns are saved on the MG3710A/B hard disk for easy access, but other waveform patterns are supported using the IQproducer waveform generation software.

Brochure pdf 2.2 MB 1/21/2022

MX370x series software - IQproducer MX3701xxA

Parameters for the waveform for the target communication system are set using a GUI to a generate a waveform pattern file for the MG3710A. The embedded Windows application IQproducer saves generated arbitrary waveform pattern files to the internal hard disk and signals are output simply by selecting the waveform pattern. In addition, a user-generated custom IQ sample file in ASCII format created by common Electronic Design Automation (EDA) software such as MATLAB, can be converted into a custom waveform pattern file for the MG3710A.

Brochure pdf 6.2 MB 1/21/2022

RF Signaling call box, Signal Analyzer and Signal Generator for 5G/LTE User Equipment RF Evaluation

This is a leaflet about MT8000A/MT8821C, signal analyzer and signal generator used for 5G/LTE User Equipment RF evaluation.

Leaflet pdf 358.3 KB 1/21/2022

Interference Test of 5G/LTE User Equipment with Signal Generator and RF Signaling call box

This is a leaflet about the interference test of 5G/LTE User Equipment with signal generator and MT8000A/MT8821C

Leaflet pdf 218.1 KB 1/21/2022

MX371054A Interference Waveform Pattern for LTE Receiver Test Operation Manual

MX371054A Interference Waveform Pattern for LTE Receiver Test (hereafter “this waveform pattern”) contains interference waveform pattern conforming to the 3GPP TS36.521-1 V16.7.0 (2020-12). Installing this waveform pattern to the MG3710A/MG3710E Vector Signal Generator (hereafter MG3710A/MG3710E) supports generation of interference waveform pattern signals used at LTE UE for receiver tests. Use of this waveform pattern requires a license corresponding to the serial number of the MG3710A/MG3710E using the pattern. When using this pattern on multiple MG3710A/MG3710E units, a license must be purchased for each MG3710A/MG3710E unit using this pattern.

Operations Manual pdf 567.4 KB Version: 1 1/17/2022

MX371055A Interference Waveform Pattern for 5G NR Receiver Test Operation Manual

MX371055A Interference Waveform Pattern for 5G NR Receiver Test (hereafter “this waveform pattern”) contains interference waveform pattern conforming to the 3GPP TS38.521-1 V17.0.0 (2021-03). Installing this waveform pattern to the MG3710A/MG3710E Vector Signal Generator (hereafter MG3710A/MG3710E) supports generation of interference waveform pattern signals used at 5G NR UE of Sub-6 GHz band for receiver tests. Use of this waveform pattern requires a license corresponding to the serial number of the MG3710A/MG3710E using the pattern. When using this pattern on multiple MG3710A/MG3710E units, a license must be purchased for each MG3710A/MG3710E unit using this pattern.

Operations Manual pdf 581.4 KB Version: 1 1/17/2022

Multi-Standard Radio Signal Generation using MG3710A / MG3710E Waveform Combine Function

Unlike general-purpose vector signal generators, the MG3710A/MG3710E can generate a combined signal for different wireless systems, such as LTE, W-CDMA, GSM, etc. This application note explains some of the problems when generating signals for combinations of different wireless systems using a general-purpose vector signal generator. It also explains how to solve these problems using the MG3710A/MG3710E and then introduces an example of how to generate Multi-Standard Radio signals.

Application Note pdf 1.2 MB 4/21/2021

Optimization Technique using Two-signal Combine Function

This document introduces the two-signal combine function of the MG3710A/MG3710E Vector Signal Generator and explains an optimized technique for measurement using this function.

Application Note pdf 1.5 MB 4/21/2021

Firmware Install Simple Operation Guide

This guide explains how to install firmware in the Vector Signal Generator MG3710A/MG3710E and Analog Signal Generator MG3740A.

User Guide pdf 282.7 KB 4/21/2021

Software License Install Simple Operation Guide

This guide explains the simple procedure for installing the waveform patterns and IQproducer license in the Vector Signal Analyzer MG3710A/MG3710E or Analog Signal Generator MG3740A (with Digital Modulation option).

User Guide pdf 282.4 KB 4/21/2021

BER Measurement Simple Operation Guide (MG3710A-021/MG3710E-021/MG3740A-021)

This guide outlines operation procedures for the BER Measurement Function option for the Vector Signal Generator MG3710A/MG3710E and Analog Signal Generator MG3740A (with Digital Modulation option).

User Guide pdf 318.8 KB 4/21/2021

Simple Guide to Using Waveform Patterns

This guide explains the Vector Signal Generator MG3710A/MG3710E and Analog Signal Generator MG3740A (with Digital Modulation option) procedures for copying and loading waveform patterns and selecting the signal for output.

User Guide pdf 385.7 KB 4/21/2021

Combination of Baseband Signal Function Simple Operation Guide

This guide explains the dual signal combination method using the Combination of Baseband Signal Function (Opt.048/078) installed in the Vector Signal Generator MG3710A/MG3710E and Analog Signal Generator MG3740A (with Digital Modulation Option).

User Guide pdf 798.7 KB 4/21/2021

MX370073B DFS Radar Pattern Operation Manual

MX370073B DFS Radar Pattern (hereafter “this waveform pattern”) contains standard waveform pattern conforming to the TELEC-T403 V12.1 and FCC06-96 (Released: June 30, 2006), FCC13-22 (Released: February 20, 2013) Dynamic Frequency Selection test. Downloading this waveform pattern to the MG3710A Vector Signal Generator (hereafter MG3710A) supports generation of radar pattern signals used at Rx Dynamic Frequency Selection (DFS) tests. Use of this waveform pattern requires a license corresponding to the serial number of the MG3710A using the pattern. When using this pattern on multiple MG3710A units, a license must be purchased for each MG3710A unit using this pattern.

Operations Manual pdf 2.4 MB Version: 2 1/28/2021

By Document Type

Software Download Service

You can download a product firmware that you have and the latest related software. (The product registration of this service is necessary to use this download service.)

Drivers Software Downloads 12/17/2020

MG3710A LabVIEW Driver

MG3710A LabVIEW Driver*To control MG3710A by remote program used LabView, please download the driver for both MG3710A and MG3700A.

Drivers Software Downloads zip 2.5 MB 1/31/2013

MG3700A LabVIEW Driver

MG3700A LabVIEW Driver *To control MG3710A by remote program used LabView, please download the driver for both MG3710A and MG3700A.

Drivers Software Downloads 3.8 MB 9/20/2012

By Product Category

How long will Anritsu “fully” support the equipment after it has been discontinued?

We will support the equipment 7 years after its discontinuance date.   Pleasecall 800-Anritsu (267-4878) for that information.

How much does it cost for Repair and/or Calibration?

Look on the tool bar of  this website and hover your mouse over the “Services & Support” words on the toolbar and click on “Repair and Calibration”. Next, click on “Repair and Calibration Pricing”. Enter your model number. The result will show your model number as a hyper link (in blue). Click on it to see the pricing.