This solution flyer discusses how the Polar Instrument solution and Anritsu VNAs have unique capabilities for making Delta-L PCB measurements which helps customers make quick and accurate measurements results. P/N: 11410-02880
Brochure
pdf 1.8 MB
Version: A
5/11/2022
The 0.8 mm Connector family is a complete coaxial connector system with single-mode performance to 145 GHz. It contains male and female non-hermetic connectors, male and female broadband terminations and in-series adapters. P/N: 11410-00317
Datasheet
pdf 826.6 KB
Version: B
2/25/2022
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
Catalog
pdf 13.3 MB
Version: AC
2/22/2022
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with the SWISSto12 MCK systems, and are ideal for active and passive material measurements. P/N: 11410-01167
Leaflet
pdf 1.1 MB
Version: C
1/27/2022
The Anritsu VectorStar and ShockLine vector network analyzers (VNAs) are compatible with Compass Technology hardware fixtures and CTG software systems, and make an ideal solution for material measurements. P/N: 11410-01182
Leaflet
pdf 1.5 MB
Version: C
1/27/2022
Anritsu’s ShockLine and VectorStar series vector network analyzers are now compatible with all the available solutions from Keycom Technologies for various types of material measurements methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and many more. P/N: 11410-01191
Leaflet
pdf 1.4 MB
Version: C
1/27/2022
This manual provides description and maintenance instructions for the Model 3656C W1 (1 mm) Calibration and Verification Kit and describes the use of the Anritsu Performance Verification Software (PVS). P/N: 10410-00784
User Guide
pdf 13.2 MB
Version: A
10/1/2021
This manual provides instructions for setup and initial test of the VectorStar ME7838 Series Broadband/Banded Millimeter-Wave Vector Network Analyzer (VNA) System. P/N: 10410-00293
Installation Guide
pdf 8.4 MB
Version: J
9/14/2021
This Measurement Guide provides instructions for using the 3744A-Rx mm-Wave Receiver Module for making noise figure measurements. P/N: 10410-00328
Measurement Guide
pdf 1.8 MB
Version: C
9/14/2021
This manual provides general service and maintenance instructions for Anritsu ME7838 Series Broadband/Millimeter-Wave Vector Network Analyzer System. P/N: 10410-00306
Maintenance Manual
pdf 6.5 MB
Version: H
9/14/2021
This guide provides quick setup instructions for the ME7838A Broadband/Banded mm-Wave VNA System assembly. P/N: 10410-00292
Quick Start Guide
pdf 2.5 MB
Version: F
9/14/2021
This guide provides quick setup instructions for the ME7838D/G Broadband/Banded mmWave VNA System assembly. P/N: 10410-00732
Quick Start Guide
pdf 4.4 MB
Version: D
9/14/2021
This guide provides quick setup instructions for the ME7838E Broadband/Banded mmWave VNA System assembly. P/N: 10410-00729
Quick Start Guide
pdf 2.4 MB
Version: E
9/14/2021
This Reference Manual provides information about the VectorStar Broadband/Banded Millimeter-Wave Modules. These modules are used with the ME7838 Series VectorStar Broadband/Banded Millimeter-Wave VNA Systems. P/N: 10410-00311
Quick Reference Guide
pdf 7.9 MB
Version: H
9/14/2021
This manual provides information for remote operation of the VectorStar MS4640B Series VNAs using commands sent from an external controller via the IEEE 488 General Purpose Interface Bus, USB, and Ethernet. P/N: 10410-00322
Programming Manual
pdf 30.3 MB
Version: AB
7/7/2021
This guide provides warranty, safety and regulatory compliance information for the VectorStar Series VNA products. P/N: 10100-00063
Datasheet
pdf 2.0 MB
Version: L
7/6/2021
This Technical Data Sheet provides the specifications for the VectorStar Broadband System ME7838AX 2-port and ME7838A4X 4-port Vector Network Analyzer. P/N: 11410-02825
Datasheet
pdf 9.1 MB
Version: A
7/6/2021
This Technical Data Sheet provides the specifications for the VectorStar Broadband System ME7838EX 2-port and ME7838E4X 4-port Vector Network Analyzer. P/N: 11410-02827
Datasheet
pdf 8.6 MB
Version: A
7/6/2021
Through the use of a novel coaxial-mode interface connector and advanced transceivers, broadband frequency coverage beyond 220 GHz is now possible. The ME7838G allows a continuous, broadband frequency sweep from 70 kHz to 220 GHz without the need to concatenate multiple systems (operational from 40 kHz to 226 GHz). P/N: 11410-01060
Datasheet
pdf 4.4 MB
Version: E
7/6/2021
This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00065
Datasheet
pdf 107.4 KB
Version: D
7/6/2021
