Skip to main content

Download Center

Search by product Model Number

By Document Type

Understanding IBW In-Building Wireless: DAS to Small Cells Application Note

The purpose of an in-building wireless (IBW) system is to provide enhanced network coverage and/or capacity when the existing macro network is not able to adequately service the demand. Coverage may be poor due to high penetration losses caused by the building structure or due to low emissivity glass installed to improve the thermal performance of the building. In dense urban environments, adjacent buildings may create an RF barrier that blocks coverage from nearby macro sites. Tall buildings typically have poor coverage on upper floors since macro site antennas, many floors below, are specifically designed to suppress energy radiating above the horizon. Capacity may be an issue in venues such as stadiums, coliseums and convention centers where many thousands of users may be trying to simultaneously access the network.

Application Note pdf 1.8 MB Version: C 3/28/2018

Managing interference in densified networks

A conversation with Anritsu Company, by Senza Fili in collaboration with RCR Wireless. They discuss how testing evolves as operators densify their networks with DAS, small cells and other solutions. P/N: 11410-00990

Articles pdf 1.4 MB Version: A 10/4/2016

CMA5 Series Optical Loss Tester Operators Manual

Handheld units are designed for the field installation, testing and commissioning of all types of optical fiber systems.

Operations Manual pdf 1.1 MB 10/15/2015

CMA5 Fiber Optic Light Sources Operators Manual

Handheld units are designed for field installation, testing and commissioning of all types of optical fiber systems.

Operations Manual pdf 815.7 KB 10/28/2013

CMA5 Fiber Optic Power Meters Operators Manual

Hand held units are precision meters designed to meet many testing applications.The CMA5 Series Fiber Optic Power Meters have calibrated wavelengths at 850, 1300, 1310, 1490, 1550 and 1625 nm. These units can measure absolute power in dBm, and microwatts (μW) along with attenuation (relative power) as dB. The general purpose 5P100 and 5P200 have a range of +10 to -60 dBm, while the 5P100C and 5P200C have a range of +23 to -50 dBm, which is ideal for CATV testing. All models have the ability to store the currently displayed dBm power level reading as a reference for subsequent measurements.

Operations Manual pdf 607.8 KB 10/28/2013

CMA5 Series Optical Loss Tester/Light Source/Optical Power Meter

The CMA5 series (Optical Loss Tester/Light Source/Optical Power Meter) measures optical loss and power for optical fiber I&M. The CMA5 series are compact and lightweight, its excellent cost performance and simple operation with the required minimum number of functions make it ideal for onsite I&M. Service engineers can choose from three models - optical loss tester, optical source, and optical power meter - to match the onsite application.

Brochure pdf 932.9 KB 7/19/2012

CMA5 Light Source Handhelds Specifications

The CMA5 Series Light Sources provide an economical and stable laser source for use in point-to-point attenuation measurement.

Datasheet pdf 161.1 KB 11/5/2006

CMA5 Power Meter Handhelds Specifications

The CMA5 Series Power Meters are economnical, accurate and easy-to-use handheld units for attenuation and power throughput measurements on point-to-point fiber optic links.

Datasheet pdf 138.3 KB 11/5/2006

By Document Type

No Records Found

By Product Category

No Records Found