Skip to main content

Anritsu FAQs

Why is the CDMA Power measured with my Cell Master read lower than it should?
If using the Internal Meter Mode to measure the channel power for it is important to set the Signal Standard to the appropriate standard and band. After doing this, you should set the channel to the channel being measured. This will set the span to the optimum setting. For CDMA, a more accurate power reading can be obtained by selecting the CDMA mode. Again, set the signal standard to the appropriate standard and band and set the channel to the desired channel. Read the power under Channel Power on the screen.

Related Links

FAQ Feedback

FAQ Feedback
Does this FAQ answer your question?*
How do you rate the quality of this content?*
If you would like to be contacted by an Anritsu representative, please let us know the best way to reach you.